journal article·2001-02

The use of plasma immersion ion processing in the synthesis of protective coatings for Al die casting

Michael Nastasi, Xiao-Ming He, Kevin C. Walter, Marko Hakovirta, Mitchell Trkula

Surface and Coatings Technology· Volume 136· Issue 1-3
Publisher page

Abstract

Abstract Plasma immersion ion processing (PIIP) has been used to synthesize adherent coatings on steel substrates that are wear-resistant and provide wetting resistance to molten aluminum. Synthesis procedures were developed for two coatings, boron carbide and a chrome-carbi-oxide. The coatings were produced using a plasma generated by the pulsed glow discharge method with various gas mixtures. Boron carbide coatings were produced using mixtures of diborane (B 2 H 6 ) diluted with He and mixed with acetylene (C 2 H 2 ) gas, and the chrome-carbi-oxide coating was produced using Cr(CO) 6 . The boron carbide coatings were found to be amorphous with hardness values in range of 12–13 GPa. The Cr-based coatings were somewhat harder with values in the range of 14–20 GPa. Both coatings show some resistance to reaction with molten Al; the boron carbide coating showed limited reaction with Al while the Cr–C–O coating showed no reaction. The non-wetting properties of the chrome-carbi-oxide coating have been ascribed to the formation of a thin Al 2 O 3 membrane around the molten Al that kinetically and thermodynamically inhibits a reaction between the Al and the Cr–C–O film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Semiconductor materials and devices · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. Die Casting Die Life Extension, J.W. Throop (Office of Government Contact, General Motors Powertrain Group, General Motors Corporation) and D.J. Brooks (Vehicle Engineering Office, Powertrain Engineering, Chrysler Corporation), 20 February 1996.
2. R.L. Lewis, C.L. Chen, Progress Report: Development of an accelerated testing procedure for die casting die wear analysis, Report No. ERC/NSM-C-89-14 for the US National Science Foundation, March 1989.
3. Nastasi · Mater. Res. Soc. Symp. Proc. · 1996 · 396 · 45510.1557/PROC-396-455 ↗
4. Walter · Surf. Coat. Technol. · 1998 · 103–104 · 20510.1016/S0257-8972(98)00394-6 ↗
5. Doolittle · Nucl. Instrum. Methods · 1985 · B9 · 34410.1016/0168-583X(85)90762-1 ↗
6. Doolittle · Nucl. Instrum. Methods · 1986 · B15 · 22710.1016/0168-583X(86)90291-0 ↗
7. X.-M. He, M. Harkovirta, K.C. Walter, M. Nastasi, unpublished.