journal article·2003-02

Optical interferometry diagnostics in laser-induced spallation on film–substrate systems

M Zhou, Y.K Zhang, L Cai, Z.H Shen, X.R Zhang, S.Y Zhang

Surface and Coatings Technology· Volume 165· Issue 2
Publisher page

Abstract

Abstract Two novel optical interferometry diagnostics methods, wave pattern identification and correlation detection, were developed for measuring the adhesion strength between a film or coatings and substrate. The method of wave pattern identification was constructed on the analysis of the physical procedure of the film spallation. According to the intensive reflective apex we could judge the film spallation intuitively, and also determine the spall moment, spall depth and spall strength directly. Furthermore, to accurately determine the initial critical spall strength and distinguish the damage degrees of the interface, through studying the alternation of propagation routes at the present of interface delamination, we advanced the correlation detection method to calculate the time delay τ for characterizing the progressive damage, such as interface delamination, film spallation and film expulsion. Based on this theory, new criteria for diagnosis of the film spallation were established, which could determine the degree of damage and the dimensions of damage quantitatively, such as the minimum width of delamination radius and the film thickness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser Material Processing Techniques · Advanced Surface Polishing Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. A comparative study of adhesion test methods for hard coatings10.1016/S0257-8972(98)00827-5 ↗
2. Evalulation of the interface strength in brittle-matrix composite systems10.1111/j.1151-2916.1998.tb02522.x ↗
3. Measurement of the interfacial mechanical properties of a thin ceramic coating on ductile substrates10.1016/S0040-6090(97)00259-9 ↗
4. Wang · 1991
5. Adhesion measurements of thin films, thick films, and bulk coatings
6. Laser photo-acoustics for gas analysis and materials testing10.1117/12.200607 ↗
7. A pulsed laser technique for an evaluation of the spall resistance of sputtered oxide films: diagnostic by interferometric probing10.1016/S0257-8972(98)00536-2 ↗
8. Measurement of interface strength by a laser spallation technique10.1016/0022-5096(92)90296-E ↗
9. Experimental and theoretical/numerical investigations of thin films bonding strength10.1016/S0167-8442(98)00066-4 ↗
10. Measurement of interface strength by the modified laser spallation technique. I. Experiment and simulation of the spallation process10.1063/1.354698 ↗
11. Measurement of Interface strength by the modified laser spallation technique. II. Application to metal/ceramic interfaces10.1063/1.354699 ↗
12. Experimental and theoretical/numerical investigations of thin films bonding strength10.1016/S0167-8442(98)00066-4 ↗
13. Measurement of film-substrate system interface strength by pulsed laser spallation technology
14. Comments on the bond strength measurements of Gupta and co-workers10.1016/0921-5093(92)90281-5 ↗
15. Laser shock deformation on coated metal substrates characterized by ultrahigh-strain-rate plastic deformation10.1063/1.1459624 ↗
16. Theoretic analysis and numerical simulation on quantitative evaluation of interface strength by pulsed-laser technology