Oxidation barrier of Cu and Fe powder by Atomic Layer Deposition
Source abstract
Abstract
Abstract Atomic Layer Deposition (ALD) is a vapor based technique which allows to deposit uniform, conformal films with a thickness control at the atomic scale. In this research, Al2O3 coatings were deposited on micrometer-sized Fe and Cu powder (particles) using the thermal trimethylaluminum (TMA)/water (H2O) process in a rotary pump-type ALD reactor. Rotation of the powder during deposition was required to obtain a pinhole-free ALD coating. The protective nature of the coating was evaluated by quantifying its effectiveness in protecting the metal particles during oxidative annealing treatments. The Al2O3 coated powders were annealed in ambient air while in-situ thermogravimetric analysis (TGA) and in-situ x-ray diffraction (XRD) data were acquired. The thermal stability of a series of Cu and Fe powder with different Al2O3 thicknesses were determined with TGA. In both samples a clear shift in oxidation temperature is visible. For Cu and Fe powder coated with 25 nm Al2O3, we observed an increase of the oxidation temperature with 300–400°C. For the Cu powder a thin film of only 8 nm is required to obtain an initial increase in oxidation temperature of 200°C. In contrast, for Fe powder a thicker coating of 25 nm is required. In both cases, the oxidation temperature increases with increasing thickness of the Al2O3 coating. These results illustrate that the Al2O3 thin film, deposited by the thermal ALD process (TMA/H2O) can be an efficient and pinhole-free barrier layer for micrometer-sized powder particles, provided that the powder is properly agitated during the process to ensure sufficient vapor-solid interaction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and devices · Catalytic Processes in Materials Science · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. High temperature oxidation resistance of plasma sprayed and surface treated YSZ coating on Hastelloy X10.1016/j.surfcoat.2017.05.002 ↗
2. Use of plasma spray technology for deposition of high temperature oxidation/corrosion resistant coatings - a review10.1002/maco.200603985 ↗
3. Microstructural feature, thermal shock resistance and isothermal oxidation resistance of nanostructured zirconia coating10.1016/j.msea.2005.10.025 ↗
4. Oxidation resistance and characterization of (AlCrMoTaTi)-Six-N coating deposited via magnetron sputtering dfdlqsmfj10.1016/j.jallcom.2015.06.025 ↗
5. Thermal stability and oxidation resistance of sputtered Ti-Al-Cr-N hard coatings10.1016/j.surfcoat.2017.05.053 ↗
6. Reactor concepts for atomic layer deposition on agitated particles: a review10.1116/1.4851676 ↗
7. Surface chemistry of atomic layer deposition: a case study for the trimethylaluminum/water process10.1063/1.1940727 ↗
8. Atomic Layer Deposition: an overview10.1021/cr900056b ↗
9. Crystallinity of inorganic films grown by atomic layer deposition: overview and general trends10.1063/1.4757907 ↗
10. Atomic layer epitaxy10.1016/S0920-2307(89)80006-4 ↗
11. Atomic layer deposition (ALD): from precursors to thin film structures10.1016/S0040-6090(02)00117-7 ↗
12. A brief review of atomic layer deposition: from fundamentals to applications10.1016/j.mattod.2014.04.026 ↗
13. Conformal coating on ultrahigh-aspect-ratio nanopores of anodic alumina by Atomic Layer Deposition using sufficient reactant exposure times. Zn concentration profiles measured by EPMA following ZnO ALD showed the progressive infiltration of the ZnO ALD i10.1021/cm0303080 ↗
14. Tailoring nanoporous materials by atomic layer deposition10.1039/c1cs15091j ↗
15. Atomic layer deposition-based tuning of the pore size in mesoporous thin films studied by in situ grazing incidence small angle X-ray scattering10.1039/C4NR05049E ↗
16. Microencapsulation of moisture-sensitive CaS:Eu[2+] Particles with Aluminum Oxide10.1149/1.3211959 ↗
17. Atomic Layer Deposition of Pt nanoparticles within the cages of MIL-101: a mild and recyclable hydrogenation catalyst10.3390/nano6030045 ↗
18. Surface passivation of Fe3O4 nanoparticles with Al2O3 via atomic layer deposition in a rotating fluidized bed reactor10.1116/1.4952401 ↗
19. Synthesis of oxidation-resistant metal nanoparticles via atomic layer deposition10.1088/0957-4484/18/34/345603 ↗
20. Combustion prevention of iron powders by a novel coating method10.1002/ceat.200500244 ↗
21. Scalable production of nanostructured particles using atomic layer deposition10.14356/kona.2014013 ↗
22. Pulsed-bed atomic layer deposition setup for powder coating10.1016/j.powtec.2014.07.034 ↗
23. A rotary reactor for thermal and plasma-enhanced atomic layer deposition on powders and small objects10.1016/j.surfcoat.2012.10.045 ↗
24. Plasma enhanced atomic layer deposition on powders10.1149/06409.0051ecst ↗
25. In-situ X-ray Diffraction study of metal induced crystallization of amorphous silicon10.1016/j.tsf.2007.09.037 ↗
26. In situ x-ray diffraction study of metal induced crystallization of amorphous germanium10.1063/1.3110722 ↗
27. Semiconductor-metal transition in thin VO2 films grown by ozone based atomic layer deposition10.1063/1.3579195 ↗
28. In situ X-ray diffraction study of the controlled oxidation and reduction in the V-O system for the synthesis of VO2 and V2O3 thin films10.1039/C5TC02553B ↗
29. Low-temperature Al2O3 Atomic Layer Deposition10.1021/cm0304546 ↗