Molecular surface engineering via collision-induced-dissociation-assisted grafting of antimicrobial molecules on self-assembled-silanized glass
Source abstract
Abstract
The surface of a glass plate was molecularly engineered to become antimicrobial by coating it with a self-assembled layer of (3-aminopropyl) trimethoxysilane (APTMS) and then with an overlayer of antimicrobial benzyldodecyldimethylammonium bromide (BAB). Hyperthermal H2 molecules with a kinetic energy of about 15 eV were used as “bullets” to collide with BAB and APTMS to selectively cleave the CH bonds in them. Subsequent recombination of the carbon radicals thus formed lead to the crosslinking and fixation of BAB to APTMS which is itself strongly bonded to the glass surface via silanization. Molecular dynamics simulations were conducted to validate this peculiar hyperthermal hydrogen induced cross-linking (HHIC) mechanism, and hyperthermal hydrogen molecules with a high flux density over 1 × 1015 H2/cm2s for completing the HHIC process in 10 s in reaction-time were experimentally generated with a specifically designed instrument. The glass silanization with APTMS and the fixation of BAB molecules were assessed and confirmed by water contact angle (WCA) measurements, X-ray photoelectron spectroscopy (XPS), as well as atomic force microscopy (AFM). The antimicrobial activity against staphylococcus aureus was confirmed with the standard ISO/DIS 22196 test-method.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Molecular Junctions and Nanostructures · Luminescence and Fluorescent Materials · Polymer Surface Interaction Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Preparation of antibacterial silver-doped silica glass microspheres10.1002/jbm.a.10547 ↗
2. Effect of increasing silver content in phosphate-based glasses on biofilms of Streptococcus sanguis10.1002/jbm.a.10052 ↗
3. Silver containing bioactive glasses prepared by molten salt ion-exchange10.1016/j.jeurceramsoc.2003.11.010 ↗
4. Antibacterial activity of silver-doped silica glass microspheres prepared by a sol-gel method10.1002/jbm.b.30773 ↗
5. Effect of silver-doped phosphate-based glasses on bacterial biofilm growth10.1128/AEM.00086-08 ↗
6. Preparation and antibacterial property of silver-containing mesoporous 58S bioactive glass10.1016/j.msec.2014.05.004 ↗
7. Antimicrobial effect of silver-doped phosphate-based glasses10.1002/jbm.a.30808 ↗
8. Preparation and characterization of antibacterial P2O5–CaO–Na2O–Ag2O glasses10.1002/jbm.a.33101 ↗
9. Study on the preparation and properties of silver-doped phosphate antibacterial glasses (Part I)10.1016/j.solidstatesciences.2011.02.004 ↗
10. Nonleaching antibacterial glass surfaces via “grafting onto”: the effect of the number of quaternary ammonium groups on biocidal activity10.1021/la8003933 ↗
11. Grafting of amphiphilic polymers containing quaternary ammonium group on SiO2 surface via surface-initiated ATRP10.1007/s10965-011-9804-2 ↗
12. Surface-initiated controlled radical polymerization: state-of-the-art, opportunities, and challenges in surface and interface engineering with polymer brushes10.1021/acs.chemrev.6b00314 ↗
13. Surface grafted antimicrobial polymer networks with high abrasion resistance10.1021/acsbiomaterials.6b00221 ↗
14. Oligothiophene based organic semiconductors with cross-linkable benzophenone moieties10.1016/j.synthmet.2008.06.019 ↗
15. One-step photochemical synthesis of permanent, nonleaching, ultrathin antimicrobial coatings for textiles and plastics10.1021/am200324f ↗
16. Thermally responsive rolling of thin gel strips with discrete variations in swelling10.1039/c2sm06681e ↗
17. Ion beam techniques for functionalization of polymer surfaces10.1016/S0168-583X(97)00296-6 ↗
18. Cleaving C-H bonds with hyperthermal H2: facile chemistry to cross-link organic molecules under low chemical- and energy-loads10.1039/C3GC41460D ↗
19. Grafting of polyelectrolytes onto hydrocarbon surfaces by high-energy hydrogen induced cross-linking for making metallized polymer films10.1039/c3cc41644e ↗
20. Enhanced wetting properties of a polypropylene separator for a lithium-ion battery by hyperthermal hydrogen induced cross-linking of poly(ethylene oxide)10.1039/C4TA01870B ↗
21. Enhanced water vapor barrier property of poly(chloro-p-xylylene) film by formation of dense surface cross-linking layer via hyperthermal hydrogen treatment10.1039/C5RA07557B ↗
22. Preparation of stable wetting surface by hyperthermal hydrogen induced cross-linking of poly(acrylic acid) on poly(chloro-p-xylylene) film10.1021/acs.jpcc.6b09547 ↗
23. Preparation of antibacterial surfaces by hyperthermal hydrogen induced cross-linking of polymer thin films10.1039/c2jm15814k ↗
24. Influence of different solvents on the morphology of APTMS-modified silicon surfaces10.1016/j.apsusc.2014.05.157 ↗
25. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
26. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
27. From ultrasoft pseudopotentials to the projector augmented-wave method10.1103/PhysRevB.59.1758 ↗
28. Effect of the damping function in dispersion corrected density functional theory10.1002/jcc.21759 ↗
29. Properties of oxidized silicon as determined by angular-dependent X-ray photoelectron spectroscopy10.1016/0009-2614(76)80496-4 ↗
30. Physiology of sweat gland function: the roles of sweating and sweat composition in human health10.1080/23328940.2019.1632145 ↗