journal article·2024-08Open access

The combination of diamond smoothing and intermediate cooling during wire arc spraying of Ni-5w%Al on EN 1.0032 to improve the high-cycle fatigue behavior

Lisa-Marie Rymer, Lisa Winter, Hendrik Liborius, Thomas Lindner, Andreas Schubert, Thomas Lampke

Abstract

The aim of this study is to improve the fatigue limit of thermally sprayed EN 1.0032 steel substrates by combining turning, diamond smoothing, and temperature regulation during wire arc spraying of Ni-5wt%Al. In contrast to conventional shot peening, diamond smoothing induces defined and uniformly distributed compressive residual stresses, which will allow for an improved fatigue limit. In addition, the spraying process is observed using an infrared camera to study the influence of cooling between each layer application. The microstructure, phases, and residual stresses are examined by scanning electron microscopy (SEM) and X-ray diffraction. The uncoated and coated specimens are investigated regarding their quasi-static and high-cycle fatigue (HCF) behavior. After the HCF tests, the fracture surfaces are analyzed by stereomicroscopy and SEM. Diamond smoothing increases the fatigue limit in contrast to solely turned surfaces by 4.3 %. Furthermore, continuous thermal spraying of diamond smoothed surfaces reduces the fatigue limit. Cooling between the single-layer applications improves the fatigue limit but cannot compensate for all tensile residual stresses introduced by thermal spraying. The results of the present study show a first positive trend to increase the fatigue limit of thermally sprayed parts using diamond smoothing for pre-machining of a steel substrate and the temperature regulation during wire arc spraying. However, further studies are needed to improve the fatigue limit, as it seems that the compressive residual stresses induced by diamond smoothing with the parameters used are too small.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Metal Alloys Wear and Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Application of thermal spraying in the automobile industry10.1016/j.surfcoat.2006.04.050 ↗
2. Surface treatment selections for automotive applications10.1016/j.surfcoat.2005.08.011 ↗
3. Perspective: challenges in the aerospace marketplace and growth opportunities for thermal spray10.1007/s11666-022-01351-x ↗
4. A review on the development of thermal barrier coatings by using thermal spray techniques10.1016/j.matpr.2021.09.018 ↗
5. The bonding formation during thermal spraying of ceramic coatings: a review10.1007/s11666-022-01379-z ↗
6. Advances in thermally sprayed WC-based wear-resistant coatings: co-free binders, processing routes and tribological behavior10.1007/s11666-022-01358-4 ↗
7. Effects of coating thickness and residual stresses on bond strength of C633-79 thermal spray coating test specimens10.1007/BF02658982 ↗
8. Sprayed coatings of exothermically formed nickel aluminide
9. Thermal spray coatings as an adhesion promoter in metal/FRP joints10.3390/met8100769 ↗
10. Campbell · 2012
11. Fatigue performance of thermal spray coatings on carbon steel: a review
12. Fatigue crack growth in bodies with thermally sprayed coating10.1007/s11666-015-0329-9 ↗
13. Intrinsic residual stresses in single splats produced by thermal spray processes10.1016/S1359-6454(01)00099-4 ↗
14. Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: an integrated study of Ni-5 wt. % Al bond coats10.1016/j.msea.2003.08.023 ↗
15. Microstructure, mechanical, and wear properties of NiCr-Re-Al2O3 coatings deposited by HVOF, atmospheric plasma spraying, and laser cladding10.1007/s11666-022-01400-5 ↗
16. Measurement of residual stress in thermal spray coatings by the incremental hole drilling method10.1016/j.surfcoat.2006.04.056 ↗
17. Fatigue behavior of bodies with thermally sprayed metallic and ceramic deposits10.1007/s11666-008-9205-1 ↗
18. The effect of coating residual stress on the fatigue life of thermal spray-coated steel and aluminum10.1016/S0257-8972(98)00665-3 ↗
19. Evaluation of WC-10Ni thermal spray coating with shot peening on the fatigue strength of AISI 4340 steel10.1016/j.proeng.2010.03.070 ↗
20. Modern cold spray: materials, process, and applications
21. Fatigue behavior of thermal sprayed WC-CoCr-steel systems: role of process and deposition parameters10.1016/j.surfcoat.2017.02.062 ↗
22. Mechanism of creation of compressive residual stress by shot peening10.1016/S0142-1123(98)00002-4 ↗
23. Inducing compressive residual stress to minimize effect of crack generation by using controlled shot peening process10.1016/j.matpr.2022.09.084 ↗
24. Fatigue crack initiation and propagation on shot-peened surfaces in A316 stainless steel10.1016/0142-1123(95)00044-T ↗
25. Influence of surface mechanical attrition treatment (SMAT) on microstructure, tensile and low-cycle fatigue behavior of additively manufactured stainless steel 316L10.3390/met12091425 ↗
26. Laser shock peening for enhanced fatigue resistance in steel structures: insights from Q960 steel study10.1016/j.ijfatigue.2024.108467 ↗
27. The effect of ultrasonic peening treatment on fatigue performance of welded joints10.3390/ma9060471 ↗
28. The effect of residual stresses arising from laser shock peening on fatigue crack growth10.1016/j.engfracmech.2010.03.033 ↗
29. Influence of semi-random and regular shot peening on selected surface layer properties of aluminum alloy10.3390/ma14247620 ↗
30. Surface modification by machine hammer peening and burnishing10.1016/j.cirp.2016.05.005 ↗
31. Effect of diamond burnishing on fatigue behaviour of AISI 304 chromium-nickel austenitic stainless steel10.3390/ma15144768 ↗
32. A cost-effective optimization approach for improving the fatigue strength of diamond-burnished steel components10.1007/s40430-020-02723-6 ↗
33. Influence of diamond smoothing on the surface layer of a 30ХГСН2А-ВД high-strength steel workpiece10.3103/S1068798X20080201 ↗
34. Surface layer characteristics due to slide diamond burnishing with a cylindrical-ended tool10.1016/j.jmatprotec.2010.08.029 ↗
35. High-speed laser metal deposition of CrFeCoNi and AlCrFeCoNi HEA coatings with narrow intermixing zone and their machining by turning and diamond smoothing10.3390/coatings12070879 ↗
36. Enhanced abrasion resistance of spark plasma sintered and HVOF sprayed Hadfield high manganese steel by turning and diamond smoothing
37. Effect of diamond smoothing on the surface finish and fatigue strength of ÉI961 steel10.1007/BF01527690 ↗
38. The role of ductility, tensile strength and fracture toughness in fatigue10.1016/0016-0032(70)90236-X ↗
39. Surface roughness effect on fatigue strength of aluminum alloy using revised stress field intensity approach
40. Effects of shot peening and artificial surface defects on fatigue properties of 50CrV4 steel10.1007/s00170-020-06532-y ↗
41. An evaluation of shot peening, residual stress and stress relaxation on the fatigue life of AISI 4340 steel10.1016/S0142-1123(01)00205-5 ↗
42. Fatigue life improvement of the high strength steel welded joints by ultrasonic impact peening10.3390/met9060619 ↗
43. Study of traverse speed effects on residual stress state and cavitation erosion behavior of arc-sprayed aluminum bronze coatings10.1007/s11666-016-0446-0 ↗
44. Variation of heat input and its influence on residual stresses and coating properties in arc spraying with different gas mixtures10.1007/s11666-018-0806-z ↗
45. Thermal spray coatings
46. Relationships between the mode II fracture toughness and microstructure of thermal spray coatings10.1016/S0257-8972(99)00018-3 ↗
47. Effect of new adhesion promoter and mechanical interlocking on bonding strength in metal-polymer composites10.1088/1757-899X/118/1/012041 ↗
48. Study by X-ray diffraction and mechanical analysis of the residual stress generation during thermal spraying10.1016/S0921-5093(02)00580-4 ↗
49. Relationship between fatigue limit and Vickers hardness in steels10.1016/j.msea.2011.01.040 ↗
50. The effect on fatigue life of residual stress and surface hardness resulting from different cutting conditions of 0.45%C steel10.1016/j.ijmachtools.2004.08.002 ↗
51. Relations between fatigue strength and other mechanical properties of metallic materials10.1111/ffe.12158 ↗
52. Influence of residual stress on thermal expansion behavior10.1063/1.125329 ↗
53. Effect of post carburizing treatments on residual stress distribution in plain carbon and alloy steels - a numerical analysis10.1016/j.jmrt.2020.05.104 ↗
54. Low coefficient of thermal expansion (CTE) nickel base superalloys for interconnect applications in intermediate temperature solid oxide fuel cells (SOFC)10.7449/2004/Superalloys_2004_617_622 ↗
55. Fatigue cracks in HVOF thermally sprayed WC-Co coatings10.1007/s11666-006-5009-3 ↗
56. Surface oxide state on metal powder and its changes during additive manufacturing: an overview
57. Effects of laser shock peening on the mechanisms of fatigue short crack initiation and propagation of AA7075-T65110.1016/j.ijfatigue.2020.106025 ↗
58. Rontgenographische Untersuchung von Spannungszustanden in Werkstoffen, Materwiss