Chemical state depth distribution of boron in high-dose implanted iron surface
Source abstract
Abstract
The resistance to wear and chemical corrosion of iron surfaces can be improved by surface boriding which is commonly achieved by the powder-pack boriding method, where the iron sample is embedded in a powder of high boron concentration and heat-treated in a furnace. The boron atoms from the powder diffuse into the iron by thermal excitation, resulting in a boron concentration gradient and a bilayer comprised of two distinct boride phases FeB and Fe 2 B. These phases possess different crystal structures and different thermal expansion coefficients, which leads to mechanical instability and spalling of the surface layer. In order to avoid the dual-phase structure, the boron was introduced into our samples by ion implantation, a non-diffusion-based method that can also be temperature-controlled. In this paper we report our new results of high-dose boron implantation of iron. Boron ions were implanted at a nominal fluence of 6.9⋅10 17 ion/cm 2 into the surface of polycrystalline iron sheets at 25 keV kinetic energy and at room temperature. After implantation, a thermal annealing was applied at the temperature of 400 °C for 1 h. The surface layer of samples was characterized by depth profile analyses of chemical constituents and of chemical states before and after annealing. We observed that when the implantation dose was high enough to produce an amorphous layer, the chemical bonds between Fe and B atoms were mainly FeB type. It was shown experimentally that these FeB chemical bonds were transformed into Fe 2 B bonds by high temperature annealing. The crystalline structure of the samples wase analysed by X-ray diffraction measurements which support our findings: freshly-implanted samples only contain FeB, annealed samples contain both Fe 2 B, and FeB. • Iron surface boriding by implantation. • High-dose boron implantation of iron. • Nanoscale depth profile analysis of iron-boride layers. • Depth distribution of chemical bonds in iron boride layers prepared by implantation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Ion-surface interactions and analysis · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. A diffusion model for describing the bilayer growth (FeB/Fe2B) during the iron powder-pack boriding10.1016/j.apsusc.2005.01.016 ↗
2. Structure refinements of iron borides Fe2B and FeB10.1524/zkri.2006.221.5-7.477 ↗
3. Hard iron boride (Fe2B) on 99.97 wt% pure iron10.1016/j.vacuum.2006.01.022 ↗
4. Characterization and Rockwell-C adhesion properties of chromium-based borided steels10.1080/01694243.2015.1052617 ↗
5. Boriding to improve the mechanical properties and corrosion resistance of steels
6. Reasons for the formation of cracks in boride coatings on steel10.1007/BF00664246 ↗
7. Iron surface treatment by boron implantation
8. Mössbauer study of the amorphization process in α-Fe by boron implantation10.1063/1.353848 ↗
9. Ion implantation and surface modification in tribology10.1016/0043-1648(75)90109-X ↗
10. High-dose ion implantation into metals10.1016/S0257-8972(97)00122-9 ↗
11. Investigation of composition and chemical state of elements in iron boride by the method of X-ray photoelectron spectroscopy10.1016/0022-4596(81)90478-3 ↗
12. Photoelectron spectroscopy of the iron borides, structures, bonding and magnetic behaviour10.1080/01418618108240410 ↗
13. Energies of neutral sputtered particles10.1016/0031-9163(66)90273-3 ↗
14. Secondary neutral mass spectrometry – a powerful technique for quantitative elemental and depth profiling analyses of nanostructures
15. Back-to-basics tutorial: X-ray diffraction of thin films10.1007/s10832-021-00263-6 ↗
16. Peltola · 2003 · 10
17. Representation of ion implantation profiles by Pearson frequency distribution curves10.1088/0022-3727/23/7/018 ↗
18. Ion-beam-induced amorphization10.1016/0025-5416(87)90196-0 ↗
19. Amorphous Fe-B alloys produced by ion implantation. I: electrical properties10.1088/0305-4608/15/6/009 ↗
20. Formation of borides and nitrides by ion implantation in iron10.1016/0022-5088(86)90055-X ↗