Thermal and corrosion performance of cast cellular structures for heat storage applications
Source abstract
Abstract
Latent thermal energy magazines based on phase change materials can utilize various heat transfer enhancers. Honeycomb castings were hereby proposed for this purpose. Cellular structures were manufactured by two combined technologies of 3D printing from polymer (poly-lactid acid, PLA) and subsequent investment casting with aluminum alloy (AC 44200). To take into account a possible degradation of metallic enhancers working in the environment of molten solar salt (KNO 3 and NaNO 3 in a weight ratio of 54:46), protective coatings were applied by plasma electrolytic oxidation (PEO). Coated and uncoated castings were subjected to an assessment of thermal performance during working cycles and corrosion resistance tests in molten nitrates under high-temperature conditions (260 °C) using electrochemical techniques. Cast aluminum structures, both coated and uncoated, successfully facilitate heat transfer by increasing the charging rate and maximum temperatures obtained in the PCM deposit. PEO layer does not seem to deteriorate heat transfer in relation to uncoated enhancer. In all of the tested arrangements, the corrosion process was suppressed as the immersion time in molten salts increased, but the best outcomes in terms of stability and corrosion protection in KNO 3 and NaNO 3 eutectic mixture were achieved for the as cast Al Si specimen.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Phase Change Materials Research · Solar Energy Systems and Technologies · Cellular and Composite Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Corrosion of metal containers for use in PCM energy storage10.1016/j.renene.2014.11.036 ↗
2. Corrosion of metal and metal alloy containers in contact with phase change materials (PCM) for potential heating and cooling applications10.1016/j.apenergy.2014.03.022 ↗
3. A review of performance enhancement of PCM based latent heat storage system within the context of materials, thermal stability and compatibility10.1016/j.enconman.2016.02.045 ↗
4. Recent advances in heat transfer enhancements: a review report
5. The heat transfer enhancement techniques and their thermal performance factor
6. Shriwas · 2018
7. Snowflake shaped high-conductivity inserts for heat transfer enhancement10.1016/j.ijheatmasstransfer.2018.08.063 ↗
8. Improving the energy discharging performance of a latent heat storage (LHS) unit using fractal-tree-shaped fins10.1016/j.apenergy.2019.114102 ↗
9. Heat transfer and energy storage performances of phase change materials encapsulated in honeycomb cells10.1016/j.est.2021.102507 ↗
10. Improvement of oxide layers formed by plasma electrolytic oxidation on cast Al–Si alloy by incorporating TiC nanoparticles10.1016/j.surfcoat.2021.127603 ↗
11. The effect of an Al-based cellular structure on the thermal performance of a zeolite-based hybrid heat accumulator10.1016/j.icheatmasstransfer.2021.105724 ↗
12. Corrosion of cast aluminum alloys: a review10.3390/met10101384 ↗
13. Aluminium corrosion in room temperature molten salt10.1016/j.jpowsour.2003.12.046 ↗
14. Corrosion behavior of aluminum in molten hydrated salt phase change materials for thermal energy storage10.1088/2053-1591/ab6c24 ↗
15. Effects of processing parameters on the corrosion performance of plasma electrolytic oxidation grown oxide on commercially pure aluminum10.3390/met10030394 ↗
16. An investigation of the coating/substrate interface of plasma electrolytic oxidation coated aluminum10.1016/j.surfcoat.2015.08.050 ↗
17. Plasma electrolytic oxidation (Peo) process—processing, properties, and applications10.3390/nano11061375 ↗
18. An investigation of ceramic coating growth mechanisms in plasma electrolytic oxidation (PEO) processing10.1016/j.electacta.2013.08.137 ↗
19. Plasma electrolytic oxidation coatings on aluminum alloys: microstructures, properties, and applications
20. Properties and structure of PEO treated aluminum alloy10.1007/s11595-021-2426-6 ↗
21. Fabrication and characterization of ceramic coating on Al7075 alloy by plasma electrolytic oxidation in molten salt10.3390/coatings10100993 ↗
22. Comparison of plasma electrolytic oxidation coatings on Al alloy created in aqueous solution and molten salt electrolytes10.1016/j.surfcoat.2018.03.091 ↗
23. An investigation of oxide coating synthesized on an aluminum alloy by plasma electrolytic oxidation in molten salt10.3390/app7090889 ↗
24. Synthesis and growth mechanism of ceramic coatings on an Al-cu alloy using plasma electrolytic oxidation in molten salt10.1016/j.jallcom.2021.159309 ↗
25. Corrosion performance of plasma electrolytic oxidation grown oxide coating on pure aluminum: effect of borax concentration10.1016/j.jmrt.2020.06.020 ↗
26. Production of ceramic layers on aluminum alloys by plasma electrolytic oxidation in alkaline silicate electrolytes10.1016/j.apsusc.2012.10.114 ↗
27. Plasma coatings on aluminium-silicon alloy surfaces
28. Plasma electrolytic oxidation (PEO) for production of anodised coatings on lightweight metal (Al, mg, Ti) alloys10.1179/174591908X372482 ↗
29. PEO of pre-anodized Al-Si alloys: corrosion properties and influence of sealings10.1016/j.apsusc.2015.03.206 ↗
30. Corrosion and tribocorrosion protection of novel PEO coatings on a secondary cast Al-Si alloy: influence of polishing and sol-gel sealing10.1016/j.corsci.2022.110548 ↗
31. PEO-chameleon as a potential protective coating on cast aluminum alloys for high-temperature applications10.1016/j.surfcoat.2020.126016 ↗
32. Wang · 2005
33. Effects of matrix silicon content on the plasma electrolytic oxidation of Al-Si alloys using different power modes
34. Influence of silicon on growth mechanism of micro-arc oxidation coating on cast Al–Si alloy10.1098/rsos.172428 ↗
35. The mechanism of PEO process on Al-Si alloys with the bulk primary silicon10.1016/j.apsusc.2009.07.090 ↗
36. Silicon effects on formation of EPO oxide coatings on aluminum alloys10.1016/j.tsf.2005.07.184 ↗
37. Systematic investigation of silicon content effects on the PEO coatings’ properties on Al–Si binary alloys in silicate-based and tungstate-containing electrolytes10.3390/coatings12101438 ↗
38. The performance of thermally conductive tree-like cast aluminum structures in PCM-based storage units10.1016/j.icheatmasstransfer.2022.106606 ↗
39. Highly thermally conductive dielectric coatings produced by plasma electrolytic oxidation of aluminum
40. The thermal conductivity of plasma electrolytic oxide coatings on aluminium and magnesium10.1016/j.surfcoat.2004.11.045 ↗
41. Effects of coating thickness on thermal conductivities of alumina coatings and alumina/aluminum hybrid materials prepared using plasma electrolytic oxidation10.1016/j.surfcoat.2012.06.009 ↗
42. Plasma electrolytic oxidation thermal barrier coating for reduced heat losses in IC engines10.1016/j.applthermaleng.2021.117316 ↗
43. An electrochemical study of the corrosion behaviour of T91 steel in molten nitrates10.3390/met13030502 ↗
44. Electrochemical impedance analysis for corrosion rate monitoring of sol-gel protective coatings in contact with nitrate molten salts for CSP applications10.3390/ma16020546 ↗
45. Microstructure, temperature estimation and thermal shock resistance of PEO ceramic coatings on aluminum10.1016/j.jmatprotec.2007.11.209 ↗
46. Microstructure, bonding strength and thermal shock resistance of ceramic coatings on steels prepared by plasma electrolytic oxidation10.1016/j.apsusc.2009.08.036 ↗
47. Lessons learned from corrosion of materials with molten salts during molten salt tank preheating10.1016/j.solmat.2022.111943 ↗
48. Corrosion of metals exposed to 25% magnesium chloride solution and tensile stress: field and laboratory studies
49. Corrosion behavior of aluminum in molten hydrated salt phase change materials for thermal energy storage10.1088/2053-1591/ab6c24 ↗
50. Cathodic protection using aluminum metal in chloride molten salts as thermal energy storage material in concentrating solar power plants10.3390/app10113724 ↗