journal article·2025-12

Analysis of four-point bending test for Nb, Ta, and V-doped CrYN thin films deposited by closed-field unbalanced magnetron sputtering

Banu Yaylali, Gokhan Gulten, Mustafa Yesilyurt, Yasar Totik, Justyna Kulczyk-Malecka, Peter Kelly, Ihsan Efeoglu

Publisher page

Abstract

The increasing expectations and requirements for engineering materials are steadily compelling researchers to evolve and innovate further. Adding transition metals to coating architectures is becoming increasingly attractive as it improves structural and mechanical properties. In this work, CrYN thin films incorporating transition metals Nb, Ta, and V were deposited on a 316L stainless steel substrate using Closed Field Unbalanced Magnetron Sputtering (CFUBMS) with a DC and Pulsed-DC power supply. The microstructural properties of the thin films were analyzed using scanning electron microscopy (SEM), while X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) provided a comprehensive understanding of the coating structure by providing information on crystallographic and surface chemical properties. Mechanical properties were evaluated using nanoindentation testing, which provided accurate measurements of hardness and elasticity, while scratch testing assessed critical load values. In addition, four-point bending tests were performed at room temperature to characterize the CrYN:Nb/Ta/V transition metal nitrides (TMNs), providing a more comprehensive analysis of the mechanical behavior (bending strength and elastic modulus) and adhesion properties of the coating. The mechanisms of coating damage (crack formation and density, spalling, flaking, and separated coating particles) were analyzed as a result of four-point bending tests. The Taguchi approach was employed to investigate how deposition parameters—such as target current, duty cycle, and pulse frequency affect elastic modulus and bending strength. Superior structural (homogeneous and dense film) and mechanical properties (CrYN:Nb/Ta/V high hardness values of 21.4, 18.2, 16.1 GPa, and bending strengths of 707, 711, and 709 MPa, respectively) were obtained. The positive correlation between hardness and bending strength points to an enhancement in the overall durability of the thin film.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Acoustic Wave Resonator Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Microstructural characterisation of carbon doped CrAlTiN nanoscale multilayer coatings10.1016/j.surfcoat.2010.11.046 ↗
2. Thermal stability of CrTaN hard coatings prepared using biased direct current sputter deposition10.1016/j.tsf.2012.11.047 ↗
3. Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels10.1016/j.surfcoat.2017.07.085 ↗
4. Effect of ag contents on the microstructure and tribological behaviors of NbN–Ag coatings at elevated temperatures10.1016/j.vacuum.2022.111330 ↗
5. A review of tribological properties and deposition methods for selected hard protective coatings10.1016/j.triboint.2022.107919 ↗
6. Novel HIPIMS deposited nanostructured CrN/NbN coatings for environmental protection of steam turbine components10.1016/j.jallcom.2018.02.312 ↗
7. Thermal and corrosion properties of V-Nb-Mo-Ta-W and V-Nb-Mo-Ta-W-Cr-B high entropy alloy coatings10.1016/j.surfcoat.2019.07.079 ↗
8. Evaluating the influence of adding Nb on microstructure, hardness and oxidation resistance of CrN coating10.1016/j.surfcoat.2016.01.047 ↗
9. Effect of Nb target power on the structure, mechanical properties, thermal stability and oxidation resistance of Cr–Al–Nb–N coatings10.1016/j.surfcoat.2015.12.002 ↗
10. Effect of Nb content on the microstructure and corrosion resistance of the sputtered Cr-Nb-N coatings10.1016/j.jallcom.2018.01.034 ↗
11. Sputter deposited chromium nitride based ternary compounds for hard coatings10.1016/S0040-6090(98)00992-4 ↗
12. Influence of niobium ion implantation on the microstructure, mechanical and tribological properties of TiAlN/CrN nano-multilayer coatings10.1016/j.surfcoat.2013.12.065 ↗
13. An in-depth understanding of the solvation effect of methanol on the anisotropy of electrochemical corrosion of ta10.1016/j.electacta.2022.141359 ↗
14. On the influence of the Cr/(Cr+ ta) ratio on the microstructure, mechanical properties and thermal stability of magnetron sputtered CrxTa1-xN coatings10.1016/j.surfcoat.2022.128877 ↗
15. Corrosion behavior of Ta and TiN double-layer-coated SUS316L for PEMFC bipolar plates using plasma-enhanced atomic layer deposition and magnetron sputtering10.1016/j.jallcom.2023.173379 ↗
16. Ab initio supported development of Nb-and Ta-alloyed (Ti, Al) N thin films with improved thermal stability10.1016/j.surfcoat.2024.130763 ↗
17. High temperature friction behavior of CrVxN coatings10.1016/j.surfcoat.2013.10.076 ↗
18. Effect of Nb and V doped elements on the mechanical and tribological properties of CrYN coatings10.1016/j.surfcoat.2023.130297 ↗
19. Influence of Nb and ta on the corrosion and mechanical properties of CrYN coatings10.1016/j.surfcoat.2023.130249 ↗
20. Determining the critical loads of V and Nb doped ternary TiN-based coatings deposited using CFUBMS on steels10.1016/j.surfcoat.2017.07.085 ↗
21. Wear performance of Y-doped nanolayered CrN/AlN coatings10.1016/j.surfcoat.2019.02.092 ↗
22. Improved hardness and oxidation resistance for CrAlN hard coatings with Y addition by magnetron co-sputtering10.1016/j.surfcoat.2014.02.034 ↗
23. Myandoab · 2016
24. Nanoindentation induced plastic deformation in nanocrystalline ZrN coating10.1016/j.matlet.2015.10.091 ↗
25. Research on thin film thickness uniformity for deposition of rectangular planar sputtering target10.1016/j.phpro.2012.03.655 ↗
26. The effect of sputtering parameters on the film properties of molybdenum back contact for CIGS solar cells
27. Shear tests on T-beam with varying shear reinforcement
28. Bendable bulk metallic glass: effects of a thin, adhesive, strong, and ductile coating10.1016/j.actamat.2012.02.037 ↗
29. Effect of reinforcement on flexural strength and ductility of gypsum-based composites with recycled wires from automobile tires10.4028/www.scientific.net/AMM.827.348 ↗
30. Bending-driven failure mechanism and modelling of double-ceramic-layer thermal barrier coating system10.1016/j.ijsolstr.2017.10.024 ↗
31. Seawater effects on static loads and interlayer cracking performance for polyvinyl chloride foam-cored sandwich composites10.1177/1687814018807342 ↗
32. An experimental and numerical study on the flexural performance of over-reinforced concrete beam strengthening with bolted-compression steel plates: part II10.3390/app10010094 ↗