Off-axis insertion of SiC particles in high-speed laser cladding of AlSi7Mg0.6
Source abstract
Abstract
Aluminium metal matrix composites (Al-MMC) reinforced with SiC particles raise interest for applications such as brake discs for their light weight, wear resistance and low dust emission. However, their production face significant challenges, in particular the homogeneous distribution of the reinforcements, and the formation of brittle aluminium carbides in the melt (casting) or melt-pool (laser cladding). This study explores high-speed laser cladding (HSLC) for Al–SiC MMC, where in-flight selective fusion of aluminium without overheating SiC particles is still a challenge, but the melt-pool life-time is shorter. HSLC with pre-mix Al-SiC powder, as reported for conventional cladding in the literature, is compared to a novel off-axis particles injection system. Compositional and phase analyses were conducted using EDX and X-ray diffraction, and particle fraction and distribution were quantified through image analysis. In all pre-mixed powder trials, brittle carbide precipitates were observed, causing cracks and pores. Adjusting the working distance to vary laser-material interaction time did not suffice. In contrast, separate injection of SiC particles prevented aluminium carbide formation and improved distribution homogeneity. These results demonstrate a viable pathway for multi-material HSLC using a flexible setup compatible with standard laser cladding systems. • Coaxial injection in cladding of Al–MMC SiC causes brittle Al₄C₃ precipitation. • Dual injection prevents carbide formation and ensures matrix integrity. • Dual injection improves SiC catchment efficiency and coating homogeneity. • Adapted powders trajectory might enable high-speed laser cladding of multi-material.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Aluminum matrix composites: fabrication and properties10.1007/BF02652716 ↗
2. Additive manufacturing of metal matrix composites10.1016/j.matdes.2025.113609 ↗
3. Kainer · 2006
4. Review of recent trends and developments in aluminium 7075 alloy and its metal matrix composites (MMCs) for aircraft applications
5. A comprehensive review on selective laser melting of aluminium matrix composites reinforced with silicon carbide10.1007/s40964-024-00883-8 ↗
6. Mechanical alloying and spark plasma sintering of nano-SiC reinforced Al-12Si-0.3Mg alloy10.1007/s13369-013-0780-1 ↗
7. Synthesis of an aluminum alloy metal matrix composite using powder metallurgy: role of sintering parameters10.3390/app12178843 ↗
8. Deposition mechanism of ceramic-reinforced metal matrix composites via cold spraying
9. Unraveling the influence of Al particle size on microstructure and tribological properties of cold-sprayed Al/B₄C composite coatings
10. A review of laser additive manufacturing (LAM) aluminum alloys: methods, microstructures and mechanical properties10.1016/j.optlastec.2024.110722 ↗
11. Achieving low-porosity AlSi10Mg cladding layers for the additive repair of aluminum alloy parts by directed energy deposition
12. Analysis and optimization of process parameters in Al-SiCp laser cladding10.1016/j.optlaseng.2015.10.014 ↗
13. Role of laser cladding parameters in composite coating (Al-SiC) on aluminum alloy10.1007/s11666-016-0431-7 ↗
14. Crack and wear behavior of SiC particulate-reinforced aluminum-based metal matrix composite fabricated by direct metal laser sintering process10.1016/j.matdes.2010.06.020 ↗
15. Influence of size and volume fraction of SiC particulates on properties of ex situ reinforced Al-4.5Cu-3Mg metal matrix composite prepared by direct metal laser sintering process10.1016/j.msea.2010.03.108 ↗
16. Laser metal deposition of Al 7075: effects of TiC nanoparticles10.1016/j.jmrt.2024.08.134 ↗
17. CALPHAD-aided design of a crack-free Al-Mg-Si-Ti alloy with high strength: heterogeneous nucleation and eutectic filling during additive manufacturing10.1080/17452759.2024.2378930 ↗
18. Famodimu · 2016
19. Influence of powder particle injection velocity on the microstructure of Al-12Si/SiCp coatings produced by laser cladding10.1016/j.surfcoat.2009.07.025 ↗
20. Microstructure and wear studies of laser-clad Al-Si/SiCp composite coatings10.1016/j.surfcoat.2007.04.003 ↗
21. Interfacial structure of a SiC/Al composite10.1016/0921-5093(96)10168-4 ↗
22. Effect of alloy elements added on microstructure and hardening of Al/SiC laser-clad coatings10.1016/j.jallcom.2017.08.153 ↗
23. Effect of SiC content on microstructural evolution and tribological properties of laser-clad TiC-reinforced Ti-Al-Si composite coatings
24. Laser cladding of aluminum alloy 6061 via off-axis powder injection10.1016/j.surfcoat.2021.127099 ↗
25. Laser melt injection in aluminum alloys: on the role of the oxide skin10.1016/S1359-6454(00)00278-0 ↗
26. Investigations on ultra-high-speed laser material deposition as an alternative for hard chrome plating and thermal spraying10.2351/1.4943910 ↗
27. Microstructure characteristics and its formation mechanism of selective laser melting SiC-reinforced Al-based composites10.1016/j.vacuum.2018.11.022 ↗
28. Selective laser melting of in situ Al₄SiC₄ + SiC hybrid-reinforced Al matrix composites: influence of starting SiC particle size10.1016/j.surfcoat.2015.04.029 ↗
29. Laser metal deposition of AlSi10Mg with high build rates10.1016/j.procir.2022.08.050 ↗
30. Mechanical properties of AlSi10Mg alloy fabricated by laser melting deposition and improvements via heat treatment10.1016/j.ijleo.2018.10.112 ↗
31. Crystallography open database – an open-access collection of crystal structures10.1107/S0021889809016690 ↗
32. The precision determination of lattice constants by the powder and rotating crystal methods and applications10.1063/1.1698520 ↗
33. The 6H-SiC structure model: further refinement from SCXRD data from a terrestrial moissanite10.2138/am.2007.2346 ↗
34. A new hexagonal polymorph of silicon carbide, 19H*†
35. A new hydrous phase δ-AlOOH synthesized at 21 GPa and 1000 °C10.1007/s002690000120 ↗
36. Redetermination of the high-pressure modification of AlOOH from single-crystal synchrotron data
37. Space group and hydrogen sites of ?-AlOOH and implications for a hypothetical high-pressure form of Mg(OH)210.1007/s00269-004-0404-0 ↗
38. High-pressure δ-Al(OH)₃ and δ-AlOOH phases and isostructural hydroxides/oxyhydroxides: new structural insights from high-resolution 1H and 27Al NMR10.1021/jp073968r ↗
39. High-pressure single crystal X-ray diffraction study on α-quartz10.1524/zkri.1999.214.6.324 ↗
40. Change in the nature of the chemical bond in compounds of magnesium with Si, Ge, Sn, and Pb upon melting
41. Die Struktur des Aluminiumcarbids Al₄C₃10.1515/zpch-1934-2707 ↗
42. In situ synthesis of core–shell-structured SiCp reinforcements in aluminium matrix composites by powder metallurgy10.3390/met11081201 ↗
43. Wettability and interfacial reactions in Al-Mg-Si/SiC and Al-Mg-Si/SiO₂ systems
44. Microstructure characteristics and its formation mechanism of selective laser melting SiC-reinforced Al-based composites10.1016/j.vacuum.2018.11.022 ↗
45. Phase transformation mechanism of Al₄C₃ by the diffusion of Si and a novel method for in situ synthesis of SiC particles in Al melt10.1016/j.jallcom.2016.05.234 ↗
46. In situ formation of plate-like Al₄O₄C and MWCNTs in Al₂O₃–C refractories with Al₄SiC₄ additives10.1016/j.matchemphys.2021.124363 ↗
47. Thermodynamics of the Al₂O₃–Al₄C₃ system I. Thermochemical functions of Al oxide, carbide and oxycarbides between 298 and 2100 K10.1016/j.jeurceramsoc.2006.06.009 ↗
48. Behavior of Al₄C₃ particles during flotation and sedimentation in aluminum melts10.1007/s11663-020-02049-7 ↗
49. Behavior of silicon carbide materials under dry to hydrothermal conditions10.3390/nano11051351 ↗
50. M2 coating prepared by ultra-high-speed laser cladding: microstructure and interfacial residual stress
51. Characterisation and mechanical properties of Al/SiC metal matrix composite coatings formed on ZE41 magnesium alloys by laser cladding10.1016/j.rinp.2019.102160 ↗
52. Effect of alloying elements (magnesium and copper) on hot cracking susceptibility of AlSi7MgCu-alloys
53. From crack-prone to crack-free: eliminating cracks in additively manufacturing of high-strength Mg₂Si-modified Al-Mg-Si alloys10.1016/j.jmst.2024.04.009 ↗
54. Composition-dependent solidification cracking of aluminum–silicon alloys during laser powder bed fusion10.1016/j.actamat.2021.116698 ↗
55. A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings10.1016/j.surfcoat.2020.126582 ↗
56. Modelling of energy attenuation due to powder flow–laser beam interaction during laser cladding process10.1016/j.jmatprotec.2011.10.019 ↗
57. Influence of standoff distance and laser defocusing distance on direct laser metal deposition of a nickel-based superalloy10.1007/s00170-022-08945-3 ↗