journal article·2026-02Open access

Morphology and yield of W nanoparticles in gas aggregation: Pathways towards functional nanocomposite films

Emese Huszar, Rita Dobszay, Peter Schweizer, Thomas Nelis, Daniele Casari, Dominik Gutnik, Amit Sharma, Johann Michler, Ralph Spolenak, Laszlo Pethö, Barbara Putz

Abstract

While gas aggregation cluster sources can tailor the chemistry, size, and shape of nanoparticles (NPs), low NP yield and instability over time still limit the fabrication of nanoparticle-based coatings or nanocomposite films. In this work, we propose controlled addition of ambient air as a nucleation source to enhance the efficiency and stability of the process. Additionally, the type of power source is varied, juxtaposing direct current and high-power impulse magnetron sputtering. Quadruple mass spectrometry and high-resolution transmission electron microscopy are used to monitor the deposition rate and morphology of tungsten NPs (size, shape, microstructure) as a function of process parameters. We observe significant variations in the deposition rate, the average diameter (3–5 nm), and the microstructure (amorphous vs. single-crystalline) of produced W NPs. The enhanced NP flux was exploited to demonstrate fast deposition of 500 nm thick W nanoparticle films as well as 200 nm thick nanocomposite films, consisting of a Cu matrix with incorporated W nanoparticles. For the latter we attribute refinement of the Cu matrix microstructure to two competing mechanisms: Formation of growth twins facilitated by W NPs and grain refinement due to residual air.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: nanoparticles nucleation surface interactions · Nanomaterials and Printing Technologies · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. A review on the classification, characterisation, synthesis of nanoparticles and their application
2. Synthesis of nanoparticles in the gas phase for electronic, optical and magentic applications- a review10.1016/S0021-8502(97)10032-5 ↗
3. Mechanical behavior and size–dependent strength of small noble-metal nanoparticles10.1016/j.actamat.2025.121092 ↗
4. Antimicrobial and anticancer activities of silver nanoparticles synthesized from the root hair extract of Phoenix dactylifera10.1016/j.msec.2018.03.035 ↗
5. Inorganic nanoparticles: A potential cancer therapy for human welfare10.1016/j.ijpharm.2018.01.034 ↗
6. High-Yield Gas-Phase Condensation Synthesis of Nanoparticles to Enable a Wide Array of Applications10.1021/acsanm.0c01400 ↗
7. Gas diffusion electrodes, reactor designs and key metrics of low-temperature CO2 electrolysers10.1038/s41560-021-00973-9 ↗
8. A new type of cluster and cluster ion source10.1007/BF01544025 ↗
9. Thin films from energetic cluster impact: a feasibility study10.1116/1.577853 ↗
10. Shape control of size-selected naked platinum nanocrystals10.1038/s41467-021-23305-7 ↗
11. Generation of cluster beams10.1070/PU2003v046n06ABEH001381 ↗
12. The morphology of mass selected ruthenium nanoparticles from a magnetron-sputter gas-aggregation source10.1007/s11051-009-9830-8 ↗
13. Computer simulation of the sputtering process10.1007/978-3-540-44502-9_2 ↗
14. Gas aggregation nanocluster source - Reactive sputter deposition of copper and titanium nanoclusters10.1016/j.surfcoat.2010.12.027 ↗
15. Influence of reactive gas admixture on transition metal cluster nucleation in a gas aggregation cluster source10.1063/1.4768528 ↗
16. Deposition of Al nanoparticles and their nanocomposites using a gas aggregation cluster source10.1007/s10853-014-8042-5 ↗
17. The evolution of Ag nanoparticles inside a gas aggregation cluster source10.1002/ppap.201900079 ↗
18. Thermodynamic stability of oxide, nitride, and carbide coating materials in liquid Sn-25Li10.1016/j.jnucmat.2004.04.210 ↗
19. Controlled sputter deposition of oxide nanoparticles-based composite thin films10.1016/j.surfcoat.2023.130325 ↗
20. Role of oxygen admixture in stabilizing TiOx nanoparticle deposition from a gas aggregation source10.1007/s11051-013-2125-0 ↗
21. In situ assessment of target poisoning evolution in magnetron sputtering10.1016/j.surfcoat.2017.05.047 ↗
22. Mechanisms of target poisoning during magnetron sputtering as investigated by real-time in situ analysis and collisional computer simulation10.1063/1.1835002 ↗
23. Thermally-induced microstructural evolution in nanoparticle-based CuO, WO3 and CuO–WO3 thin films for hydrogen gas sensing10.1016/j.apsadv.2025.100768 ↗
24. Enhancement of copper nanoparticle yield in magnetron sputter inert gas condensation by applying substrate bias voltage and its influence on thin film morphology10.1016/j.vacuum.2024.113724 ↗
25. Thermally stable nanotwins: new heights for Cu mechanics10.1002/advs.202203544 ↗
26. Synthesis and mechanical properties of co-deposited W nanoparticle and ZrCuAg metallic glass thin film composites10.1016/j.tsf.2023.139822 ↗
27. Direct co-deposition of mono-sized nanoparticles during sputtering10.1016/j.scriptamat.2020.05.032 ↗
28. Elemental characterization of Al nanoparticles buried under a Cu thin film – TOF-SIMS vs. STEM/EDX10.1021/acs.analchem.0c02361 ↗
29. 3D imaging of nanoparticles in an inorganic matrix using TOF-SIMS validated with STEM and EDX10.1021/acs.analchem.9b02545 ↗
30. Tuning the size, composition and structure of Au and Co50Au50 nanoparticles by high-power impulse magnetron sputtering in gas-phase synthesis10.1088/1361-6528/aaf1fa ↗
31. Advanced nanocluster ion source based on high-power impulse magnetron sputtering and time-resolved measurements of nanocluster formation10.1021/jp406521v ↗
32. Scaling up of cluster beam deposition technology for catalysis application10.1007/s11705-021-2101-7 ↗
33. Development of high-flux ion source for size-selected nanocluster ions based on high-power impulse magnetron sputtering10.1246/cl.130247 ↗
34. Unimolecular dissociations and free radical recombination reactions10.1063/1.1700424 ↗
35. On the condensation sticking coefficient: A quantitative discussion10.1063/1.440821 ↗
36. Image processing with imageJ
37. KMC-2 : An X-ray beamline with dedicated diffraction and XAS endstations at BESSY II
38. Mass spectrometric investigations of nano-size cluster ions produced by high pressure magnetron sputtering10.1002/ctpp.201200046 ↗
39. Effect of exit-orifice diameter on Cu nanoparticles produced by gas-aggregation source10.1016/j.surfcoat.2021.127196 ↗
40. Huttel · 2017
41. Tungsten nanoparticles with controlled shape and crystallinity obtained by magnetron sputtering and gas aggregation10.1016/j.matlet.2017.04.105 ↗
42. Synthesis of flower-like tungsten nanoparticles by magnetron sputtering combined with gas aggregation10.1140/epjd/e2015-60097-4 ↗
43. Unravelling oxygen driven α to β phase transformation in tungsten10.1038/s41598-020-71650-2 ↗
44. High power impulse magnetron sputtering discharge10.1116/1.3691832 ↗
45. Comparison Between DC and HiPIMS Discharges. Application to Nickel Thin Films
46. Gas-phase synthesis of nanoparticles: Present status and perspectives10.1557/mrc.2018.169 ↗
47. Modeling the extraction of sputtered metal from high power impulse hollow cathode discharges10.1088/0963-0252/22/3/035006 ↗
48. From Cu nanoparticles to Al2O3 encapsulated porous layers with enhanced mechanical stability10.1002/admi.202501037 ↗
49. Large-scale production of nano-twinned, ultrafine-grained copper10.1016/j.msea.2006.05.109 ↗
50. Enhanced hardening in Cu/330 stainless steel multilayers by nanoscale twinning10.1016/j.actamat.2003.10.033 ↗
51. Columnar Grains and Twins in High-Purity Sputter-Deposited Copper10.1116/1.1312763 ↗
52. Atomic scale volume and grain boundary diffusion elucidated by in situ STEM10.1038/s41467-023-43103-7 ↗
53. Oxygen-mediated deformation and grain refinement in Cu-Fe nanocrystalline alloys10.1016/j.actamat.2018.12.040 ↗
54. Preparation and characterization of copper nitride films at various nitrogen contents by reactive radio-frequency magnetron sputtering10.1016/j.matlet.2005.12.028 ↗
55. Modification of the grain size of sputtered copper with additions of oxygen, krypton, silver, or yttrium10.1116/1.572818 ↗
56. Nano materials science deformation mechanisms, microstructural evolution and mechanical properties in small-scaled face-centered-cubic metallic thin films10.1016/j.nanoms.2019.11.002 ↗
57. Kelly · 1972
58. I. Bakonyi, Accounting for the resistivity contribution of grain boundaries in metals : critical analysis of reported experimental and theoretical data for Ni and Cu, Springer Berlin Heidelberg, 2021. doi:https://doi.org/10.1140/epjp/s13360-021-01303-4, Eur. Phys. J. Plus.10.1140/epjp/s13360-021-01303-4 ↗
59. Resistivity in Cu : The Effect of Boundary Structure10.1021/acsnano.1c06367 ↗
60. J.M. Rickman, Surface and grain boundary scattering in nanometric Cu thin films: a quantitative analysis including twin boundaries, (2017). doi:https://doi.org/10.1116/1.4894453.10.1116/1.4894453 ↗