Continuous superposition of high power pulses and radio frequency power on a single magnetron target
Source abstract
Abstract
High Power Impulse Magnetron Sputtering (HiPIMS) offers significant advantages over established sputtering techniques such as DC, MF, or RF sputtering. Thin films deposited with HiPIMS exhibit improved properties but often suffer from low deposition rates. In addition, reactive HiPIMS processes tend to arc. Superposition of different plasma excitations may help to overcome these limitations. We investigated the superposition of HiPIMS and RF on a single magnetron and studied voltage-current characteristics as well as the influence of pressure on process stability and cathode voltage for the reactive and non-reactive deposition of Aluminium in Ar/O2 discharge. We found that superimposing RF onto HiPIMS allows for stable operation at lower pressures and reduces arcing. Notably, the effect of the superimposed RF on peak current differs by mode: in reactive sputtering, the HiPIMS peak current is increased, while in non-reactive mode, the peak current is decreased. This is attributed to the different secondary electron emission in non-reactive and reactive mode.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Pulsed Power Technology Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Ohring · 2002
2. A novel pulsed magnetron sputter technique utilizing very high target power densities10.1016/S0257-8972(99)00292-3 ↗
3. Influence of high power densities on the composition of pulsed magnetron plasmas10.1016/S0042-207X(01)00475-4 ↗
4. Ionized sputter deposition using an extremely high plasma density pulsed magnetron discharge10.1116/1.582380 ↗
5. Ionization of sputtered metals in high power pulsed magnetron sputtering10.1116/1.1818135 ↗
6. Plasma dynamics in a highly ionized pulsed magnetron discharge10.1088/0963-0252/14/3/015 ↗
7. High power pulsed magnetron sputtering: Fundamentals and applications10.1016/j.jallcom.2008.08.104 ↗
8. Discharge physics of high power impulse magnetron sputtering10.1016/j.surfcoat.2011.03.081 ↗
9. On the film density using high power impulse magnetron sputtering10.1016/j.surfcoat.2010.07.041 ↗
10. Ion-assisted physical vapor deposition for enhanced film properties on nonflat surfaces10.1116/1.1861049 ↗
11. Investigation of high power impulse magnetron sputtering pretreated interfaces for adhesion enhancement of hard coatings on steel10.1016/j.surfcoat.2005.11.082 ↗
12. Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion10.1063/1.2697052 ↗
13. High-power impulse magnetron sputtering and its applications10.1351/PAC-CON-09-10-43 ↗
14. Advantages of nanocomposite coatings deposited by high power pulse magnetron sputtering technology10.1016/j.jmatprotec.2008.01.035 ↗
15. Target material pathways model for high power pulsed magnetron sputtering10.1116/1.1865133 ↗
16. Process characteristics and film properties upon growth of tioxfilms by high power pulsed magnetron sputtering10.1088/0022-3727/40/7/037 ↗
17. Deposition rates of high power impulse magnetron sputtering: Physics and economics10.1116/1.3299267 ↗
18. High deposition rate films prepared by reactive HiPIMS10.1016/j.vacuum.2021.110329 ↗
19. Tuning the characteristics of Al2O3 thin films using different pulse configurations: Mid-frequency, high-power impulse magnetron sputtering, and their combination10.1016/j.surfcoat.2023.129648 ↗
20. Effect of pulse configuration on the reactive deposition of TiN coatings using HiPIMS10.1016/j.surfcoat.2023.130024 ↗
21. Physics of arcing, and implications to sputter deposition10.1016/j.tsf.2005.07.228 ↗
22. A review comparing cathodic arcs and high power impulse magnetron sputtering (hipims)10.1016/j.surfcoat.2014.08.043 ↗
23. Arc energy minimization in high-power impulse magnetron sputtering10.1016/j.vacuum.2022.111213 ↗
24. Tutorial: Reactive high power impulse magnetron sputtering (R-HiPIMS)10.1063/1.4978350 ↗
25. A novel pulsed supply with arc handling and leading edge control as enabling technology for high power pulsed magnetron sputtering (HPPMS)
26. Ultra-short pulse HiPIMS: A strategy to suppress arcing during reactive deposition of SiO2 thin films with enhanced mechanical and optical properties10.3390/coatings10070633 ↗
27. Improving HiPIMS deposition rates by hybrid RF/HiPIMS co-sputtering, and its relevance for NbSi films10.1016/j.surfcoat.2014.02.007 ↗
28. Hybrid high power impulse and radio frequency magnetron sputtering system for ticrsin thin film depositions: Plasma characteristics and film properties10.1016/j.surfcoat.2018.04.072 ↗
29. Modifications of coatings by DC-Sputtering with superimposed HPPMS
30. Properties of NiCr sputtered by HIPIMS in unipolar and DC-superimposed mode
31. Hybrid HIPIMS and DC magnetron sputtering deposition of TiN coatings: Deposition rate, structure and tribological properties10.1016/j.surfcoat.2013.07.003 ↗
32. Superimposed MF-HiPIMS processes for the deposition of ZrO2 thin films
33. G. Mark, E. Parra, R. Bandorf, M. Vergöhl, New superimposed pulsed plasma technology using high power impulse magnetron sputtering (HiPIMS) combined with DC or MF-frequency, in: 53rd Annual Technical Conference Proceedings, no. 0737-5921, 2010.
34. Oelschlegel · 2012
35. Superimposed high power impulse and middle frequency magnetron sputtering: Role of pulse duration and average power of middle frequency10.1016/j.surfcoat.2017.11.057 ↗
36. Superimposition of high power impulse and middle frequency magnetron sputtering for fabrication of CrTiBN multicomponent hard coatings10.1016/j.surfcoat.2018.03.045 ↗
37. Adam · 2023
38. Swoboda · 2024
39. Preparation of ta/mo structure by using rf-dc coupled magnetron sputtering10.1016/S0040-6090(97)00727-X ↗
40. Characterization of a magnetron sputtering discharge with simultaneous RF- and DC-excitation of the plasma for the deposition of transparent and conductive ZnO:Al-films10.1016/S0257-8972(97)00253-3 ↗
41. Bender · 1999
42. RF-superimposed DC and pulsed DC sputtering for deposition of transparent conductive oxides10.1016/j.tsf.2006.11.166 ↗
43. On the deposition rate in a high power pulsed magnetron sputtering discharge10.1063/1.2362575 ↗
44. Current–voltage-time characteristics of the reactive ar/n2 high power impulse magnetron sputtering discharge10.1063/1.3653233 ↗
45. Physics and technology of magnetron sputtering discharges10.1088/1361-6595/abb7bd ↗
46. High power impulse magnetron sputtering: Current–voltage-time characteristics indicate the onset of sustained self-sputtering10.1063/1.2817812 ↗
47. Magnetron sputter deposition: Linking discharge voltage with target properties10.1016/j.tsf.2008.11.108 ↗
48. Revising secondary electron yields of ion-sputtered metal oxides10.1088/0022-3727/49/16/16LT01 ↗
49. Plasma “anti-assistance” and “self-assistance” to high power impulse magnetron sputtering10.1063/1.3097390 ↗
50. Transparent and conducting ZnO(:Al) films deposited by simultaneous RF- and DC-excitation of a magnetron10.1016/S0040-6090(97)00633-0 ↗
51. Gudmundsson · 2020 · 1
52. Discharge voltage measurements during magnetron sputtering10.1016/j.surfcoat.2005.02.166 ↗
53. Electron dynamics in radio frequency magnetron sputtering argon discharges with a dielectric target10.1088/1361-6595/abe9f9 ↗
54. Sensitivity analysis of various physics processes in industrial HiPIMS: A global plasma modelling perspective10.1016/j.surfcoat.2025.132126 ↗