journal article·2026-02Open access

The effect of Mo interlayer on CeO2/Y2O3 reinforced AlCrFeNiCu high-entropy alloy coatings on Zr-4 substrate

Xiaona Ren, Zhipei Chen, Peng Wang, Wenchang Wang, Yao Wang, Changchun Ge

Abstract

Rare earth oxide (CeO₂/Y₂O₃) reinforced AlCrFeNiCu high-entropy alloy coatings with a Mo interlayer (designated as Mo/CeO₂-AlCrFeNiCu and Mo/Y₂O₃-AlCrFeNiCu) were successfully deposited onto a Zr-4 substrate via high-speed laser cladding. The microstructural characteristics and properties of the composite coatings were comprehensively investigated. The results demonstrate that the Mo interlayer alleviates the thermal mismatch between the substrate and the HEA coatings and, to a certain degree, counteracts the grain refinement effect induced by the rare earth oxides. Overall, it plays a critical role in enhancing interfacial structural stability, mitigating thermal stress, and improving overall coating performance. It effectively optimizes the coating-substrate bonding integrity, reduces susceptibility to high-temperature fretting fatigue and plastic deformation, and significantly lowers the specific wear rate. Furthermore, the Mo interlayer enhances the compactness and continuity of the interface, suppresses the formation of corrosive pathways, and promotes the formation of a thicker, more stable passive film on the coating surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Irradiation effects in high entropy alloys and 316H stainless steel at 300 °C10.1016/j.jnucmat.2018.08.031 ↗
2. Enhancing radiation tolerance by controlling defect mobility and migration pathways in multicomponent single-phase alloys10.1038/ncomms13564 ↗
3. Towards V-based high-entropy alloys for nuclear fusion applications10.1016/j.scriptamat.2019.09.028 ↗
4. Processing, alloy composition and phase transition effect on the mechanical and corrosion properties of high entropy alloys: a review10.1016/j.jmrt.2016.03.004 ↗
5. A promising new class of irradiation tolerant materials: Ti2ZrHfV0.5Mo0.2 high-entropy alloy10.1016/j.jmst.2018.09.034 ↗
6. Irradiation effects in high-entropy alloys and their applications10.1016/j.jallcom.2022.166768 ↗
7. Microstructural stability and mechanical behavior of FeNiMnCr high entropy alloy under ion irradiation10.1016/j.actamat.2016.05.007 ↗
8. Spinodal decomposition and radiation damage of a FeCuMnNi high-entropy alloy10.1016/j.nme.2023.101534 ↗
9. Preparation, structure, and properties of an AlCrMoNbZr high-entropy alloy coating for accident-tolerant fuel cladding10.1016/j.surfcoat.2018.04.037 ↗
10. Improved oxidation resistance through an in-situ formed diffusion barrier: oxidation behavior of amorphous multi-component FeCrAlMoSiY-coated Zr in high-temperature steam10.1016/j.corsci.2021.109566 ↗
11. Xe20+ ions irradiation and autoclave corrosion coupled with steam oxidation behaviors of FeCrAlMoSiY-coated Zr claddings10.1016/j.surfcoat.2022.128166 ↗
12. Preparation, structure, and properties of high-entropy alloy multilayer coatings for nuclear fuel cladding: a case study of AlCrMoNbZr/(AlCrMoNbZr) N10.1016/j.jnucmat.2018.10.001 ↗
13. Improving accident tolerance of nuclear fuel with coated Mo-alloy cladding, nuclear
14. High-temperature oxidation of Zr1Nb zirconium alloy with protective Cr/Mo coating10.1016/j.surfcoat.2022.128459 ↗
15. High-temperature steam oxidation of accident-tolerant Cr/Mo-coated Zr alloy at 1200–1400 °C10.3390/coatings13010191 ↗
16. Oxidation behavior of FeCrAl coated Zry-4 under high temperature steam environment10.1016/j.corsci.2019.01.004 ↗
17. Oxidation resistance of Mo/Cr bilayer coating on Zr alloy in a 1200 °C steam environment, corrosion
18. Microstructure evolution of a Cr-Cr/Mo coated Zr alloys in inert gas and steam environment at high temperature10.1016/j.jnucmat.2023.154845 ↗
19. Microstructure, corrosion resistance and high temperature oxidation properties of AlCrFeNiCu high-entropy alloy coating by high-speed laser cladding10.1016/j.surfcoat.2024.131159 ↗
20. Influence of Y2O3 addition amount on the microstructure and wide-temperature range tribological properties of wear-resistant and friction-reducing titanium-based coatings10.1016/j.surfcoat.2025.132657 ↗
21. Columnar to equiaxed transition in solidification processing10.1016/S1468-6996(01)00047-X ↗
22. Single-crystal laser deposition of superalloys: processing–microstructure maps10.1016/S1359-6454(00)00367-0 ↗
23. Revisiting solidification microstructure selection maps in the frame of additive manufacturing
24. Effects of Zr and Y additions on microstructure and mechanical properties of cast A356 alloy10.1016/j.jmrt.2024.05.058 ↗
25. Effect of CeO2 addition on microstructure and mechanical properties of in-situ (Ti, Nb)C/Ni coating10.1016/j.surfcoat.2018.12.083 ↗
26. Effect of Ti, Mn and Mo on the microstructure and properties of CoCrFeNi high entropy alloy coatings prepared by laser cladding, materials today
27. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
28. High entropy alloy synthesis, characterisation, manufacturing potential applications: a review10.1080/10426914.2021.2006223 ↗
29. Improving mechanisms of lamellar microstructure and mechanical properties by Y and in-situ Y2O3: modification of carbides particles and complete transformation of Ti2AlC particles10.1016/j.matchar.2023.113576 ↗
30. Microstructure, mechanical properties, corrosion resistance and high temperature oxidation of Mo-AlCrFeNiCu high-entropy alloy composite coating by high-speed laser cladding
31. Revealing relationships between microstructure and hardening nature of additively manufactured 316L stainless steel10.1016/j.matdes.2020.109385 ↗
32. Strengthening mechanisms in directed energy deposited austenitic stainless steel10.1016/j.actamat.2018.11.021 ↗
33. Investigation of the tribological properties of CoCrFeNiTix high-entropy alloys coatings prepared by laser cladding based on molecular dynamics simulation and tribological experiments10.1016/j.triboint.2025.111428 ↗
34. Corrosion studies on pulse reverse Ni–Mo coatings electrodeposited on cu substrate10.1016/j.electacta.2024.143828 ↗
35. Influence of a Mo interlayer on the oxidation behavior of a Cr coating on a Zr alloy substrate10.1016/j.corsci.2023.111192 ↗
36. A comparative study on the oxidation behavior and failure mechanisms of conventional NiCoCrAl alloy and in-situ composite AlCoCrFeNi2.1 eutectic high-entropy alloy at 1300 °C10.1016/j.compositesb.2023.111097 ↗
37. An in-situ oxide-dispersion-strengthened AlCoCrFeNiY high-entropy alloy composite coating prepared by AC-HVAF with superior oxidation and spallation resistance10.1016/j.compositesb.2023.110933 ↗
38. The influence of the reactive element yttrium on the stress in alumina scales formed by oxidation10.1016/S1359-6454(96)00258-3 ↗