Engineering TNZT-coated titanium scaffolds via additive manufacturing and magnetron sputtering for bone tissue replacement
Source abstract
Abstract
The biomechanical behavior and corrosion phenomena of porous metallic implants can compromise their clinical success. This work proposes modifying the surface of c.p. titanium scaffolds manufactured by 3D-printing (Direct Ink Writing), depositing a thin film of a β-Ti alloy (Ti-35Nb-7Zr-5Ta) using the High-Power Impulse Magnetron Sputtering (HiPIMS) technique. The versatility of this technique has enabled the fabrication of conformal coatings with uniform thickness, excellent adhesion, a nanorough surface, and a homogeneous columnar distribution. Regarding the biofunctional behavior of the coatings, contact angle measurements and a comprehensive electrochemical study (including impedance spectroscopy, open-circuit potential, and anodic polarization) were performed in artificial saliva. The results are discussed in terms of 1) the potential of the HiPIMS technique; and 2) the role of the coating (effect on stress shielding, improved corrosion resistance, and fatigue life potential). Electrochemical measurements demonstrate the effectiveness of the coating in improving corrosion resistance. In particular, the corrosion current density decreased from 1.62 ± 0.06 μA/cm 2 for uncoated scaffolds to 0.31 ± 0.01 μA/cm 2 after coating. At the same time, the polarization resistance increased nearly fivefold (from 0.84 × 10 5 to 3.72 × 10 5 Ω·cm 2 ), confirming the protective effect of the TNZT film. The scaffold porosity favors bone ingrowth, while the reduced Young's modulus of the HiPIMS-deposited TNZT coating minimizes bone resorption. Moreover, its higher nanohardness suggests a potential increase in fatigue resistance. Finally, the synergistic combination of DIW-engineered porosity and a compact HiPIMS-deposited TNZT film will successfully alleviate stress shielding while enhancing corrosion resistance and biofunctional compatibility.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Magnesium Alloys: Properties and Applications · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (80)
Show source-provided references
1. A review on biomedical titanium alloys: recent progress and prospect10.1002/adem.201801215 ↗
2. Surface modification techniques of titanium and titanium alloys for biomedical orthopaedics applications: a review10.1016/j.colsurfb.2023.113339 ↗
3. Long-term (10-year) dental implant survival: a systematic review and sensitivity meta-analysis10.1016/j.jdent.2019.03.008 ↗
4. 10-year survival and success rates of 511 titanium implants with a sandblasted and acid-etched surface: a retrospective study in 303 partially edentulous patients10.1111/j.1708-8208.2012.00456.x ↗
5. Orchestrating soft tissue integration at the transmucosal region of titanium implants10.1016/j.actbio.2021.01.001 ↗
6. Advances in implant surface modifications to improve osseointegration10.1039/D1MA00675D ↗
7. Multi-scale surface treatments of titanium implants for rapid osseointegration: a review10.3390/nano10061244 ↗
8. Corrosion fatigue of biomedical metallic alloys: mechanisms and mitigation10.1016/j.actbio.2011.09.012 ↗
9. Failure analysis of a commercially pure titanium plate for osteosynthesis10.1016/S1350-6307(02)00067-5 ↗
10. Structural analysis and corrosion studies on an ISO 5832-9 biomedical alloy with TiO2 sol–gel layers10.1007/s10856-013-5099-7 ↗
11. Failure analysis of two Ti-alloy total hip arthroplasty femoral stems fractured in vivo10.1002/jbm.b.10003 ↗
12. Parameter optimization of microwave sintering porous Ti-23%Nb shape memory alloys for biomedical applications10.1016/S1003-6326(18)64702-8 ↗
13. Microstructures and mechanical properties of Ti-Nb alloy at different composition of Nb produced via powder metallurgy route10.4028/www.scientific.net/MSF.863.14 ↗
14. Additive manufacturing of Ni-free Ti-based shape memory alloys: a review10.1016/j.bioadv.2024.213774 ↗
15. An efficient powder metallurgy processing route to prepare high-performance β-Ti–Nb alloys using pure titanium and titanium hydride powders10.3390/met8070516 ↗
16. Synthesis of Ti-Zr alloy by powder metallurgy
17. Additive manufacturing processes for metals and effects of defects on mechanical strength: a review10.1016/j.prostr.2021.10.057 ↗
18. Additive manufacturing technologies: an overview about 3D printing methods and future prospects10.1155/2019/9656938 ↗
19. Robocasting additive manufacturing of titanium and titanium alloys: a review10.1007/s12666-022-02755-7 ↗
20. Titanium scaffolds by direct ink writing: fabrication and functionalization to guide osteoblast behavior10.3390/met10091156 ↗
21. Current challenges and potential directions towards precision microscale additive manufacturing – part I: direct ink writing/jetting processes10.1016/j.precisioneng.2020.12.009 ↗
22. Direct ink writing: A 3D printing technology for diverse materials10.1002/adma.202108855 ↗
23. A study on the mechanical properties and corrosion behavior of the new as-cast TZNT alloys for biomedical applications10.1016/j.msec.2020.110725 ↗
24. Β-Ti alloys for orthopedic and dental applications: a review of progress on improvement of properties through surface modification10.3390/coatings11121446 ↗
25. Recent advancements in nanomaterials for biomedical implants10.1016/j.bea.2022.100029 ↗
26. Recent developments in coatings for orthopedic metallic implants10.3390/coatings11070791 ↗
27. Cutting-edge biomaterial in implantable devices: from biocompatibility to biointegration10.1016/j.ijbiomac.2025.149244 ↗
28. Strategic defenses: a review of novel approaches to combat nosocomial infections on medical implants10.1016/j.ijpharm.2025.125827 ↗
29. A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance10.1039/C8BM00021B ↗
30. Magnetron sputtered ß-Ti coatings for biomedical application: a HiPIMS approach to improve corrosion resistance and mechanical behavior10.1016/j.apsusc.2024.161366 ↗
31. Ti6Al4V coatings on titanium samples by sputtering techniques: microstructural and mechanical characterization10.1016/j.jallcom.2023.170018 ↗
32. Deposition of titanium films on complex bowl-shaped workpieces using DCMS and HiPIMS10.1016/j.surfcoat.2022.128192 ↗
33. Enhanced ionization sputtering: a concept for superior industrial coatings10.1016/j.surfcoat.2013.11.040 ↗
34. Engineering of multilayered coating on additively manufactured Ti-6Al-4V porous implants to promote tribological and fatigue performances10.1016/j.surfcoat.2024.131400 ↗
35. Investigation of corrosion and wear performance of TiNbTaZr/Cr-Mo PVD coatings on 316L SS in Hanks's solution for improved biomedical applications10.1016/j.surfcoat.2023.130021 ↗
36. Bioapplication of TiN thin films deposited using high power impulse magnetron sputtering10.1016/j.surfcoat.2019.01.106 ↗
37. In vitro and in vivo biocompatibility study of surface modified TiN deposited on Ti6Al4V using high-power impulse magnetron sputtering technique10.1016/j.surfcoat.2020.125814 ↗
38. TiN/NbN nanoscale multilayer coatings deposited by high power impulse magnetron sputtering to protect medical-grade CoCrMo alloys10.3390/coatings11070867 ↗
39. Customisation of PVD coatings for biomedical devices10.1016/j.surfcoat.2025.132277 ↗
40. A review of fatigue behavior in nanocrystalline metals10.1007/s11340-009-9301-2 ↗
41. Oxidation and fatigue behaviour of γ-TiAl coated with HIPIMS CrAlYN/CrN nanoscale multilayer coatings and EB-PVD thermal barrier coatings
42. Development of superlattice CrN/NbN coatings for joint replacements deposited by high power impulse magnetron sputtering10.1007/s10856-016-5751-0 ↗
43. ASTM C373-14 - Standard Test Method for Water Absorption · 2014
44. Designing bioactive porous titanium interfaces to balance mechanical properties and in vitro cells behavior towards increased osseointegration10.1016/j.surfcoat.2019.03.001 ↗
45. Effect of the surface finish on the mechanical properties and cellular adhesion in (Ce,Y)-TZP/Al2O3 ceramic composites for denture implants10.1016/j.jmbbm.2022.105363 ↗
46. How does scaffold porosity conduct bone tissue regeneration?10.1002/adem.202100463 ↗
47. The impact of contact angle on the biocompatibility of biomaterials10.1097/OPX.0b013e3181da863e ↗
48. Effect of roughness, wettability and morphology of engineered titanium surfaces on osteoblast-like cell adhesion10.1016/j.colsurfa.2009.12.017 ↗
49. Protein adsorption on biomaterial surfaces: subsequent conformational and biological consequences – a review
50. Implication of surface properties, bacterial motility, and hydrodynamic conditions on bacterial surface sensing and their initial adhesion10.3389/fbioe.2021.643722 ↗
51. Bacterial adhesion mechanisms on dental implant surfaces and the influencing factors10.1016/j.ijadhadh.2016.03.022 ↗
52. A review on the wettability of dental implant surfaces II: biological and clinical aspects10.1016/j.actbio.2014.03.032 ↗
53. Effect of wettability and surface functional groups on protein adsorption and cell adhesion using well-defined mixed self-assembled monolayers10.1016/j.biomaterials.2007.03.013 ↗
54. Zauner · 2022
55. Fatigue properties of a 316L stainless steel coated with different TiNx deposits10.1016/S0257-8972(01)01346-9 ↗
56. Fatigue behavior of PVD coated Ti–6Al–4V alloy10.1016/j.ijfatigue.2010.11.007 ↗
57. Effect of surface treatments on fretting fatigue of Ti–6Al–4V10.1016/j.ijfatigue.2006.10.005 ↗
58. Influence of Nb content on the structure, morphology, nanostructure, and properties of titanium-niobium magnetron sputter deposited coatings for biomedical applications10.1016/j.surfcoat.2017.03.015 ↗
59. Impact of Zr content on the nanostructure, mechanical, and tribological behaviors of β-Ti-Nb-Zr ternary alloy coatings10.1016/j.tsf.2021.138565 ↗
60. Phase stability and properties of Ti-Nb-Zr Thin films and their dependence on Zr addition10.3390/ma11081361 ↗
61. Magnetron sputtering of antibacterial and antifungal tantalum-copper and niobium-copper coatings on three dimensional-printed porous titanium alloy scaffolds: Part I10.1595/205651325X17157666493916 ↗
62. Bacterial adhesion on amorphous and crystalline metal oxide coatings10.1016/j.msec.2015.07.031 ↗
63. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
64. Mechanical properties of nanocrystalline materials10.1016/j.pmatsci.2005.08.003 ↗
65. Electrochemical corrosion behavior of Ti–35Nb–7Zr–5Ta powder metallurgic alloys after hot isostatic process in fluorinated artificial saliva10.1016/j.jmrt.2021.12.085 ↗
66. Comparative analysis of corrosion resistance between beta titanium and Ti-6Al-4V alloys: a systematic review10.1016/j.jtemb.2020.126618 ↗
67. Electrochemical and XPS studies of corrosion behavior of Ti–23Nb–0.7Ta–2Zr–O alloy in ringer's solution10.1016/j.matchemphys.2008.08.043 ↗
68. Oxygen-driven shell-like microstructure: a pathway to high-performance PVD Cr coatings for metal protection10.1038/s41529-025-00591-w ↗
69. HiPIMS induced a facile synthesis of Ti3SiC2 MAX phase coating at 850 °C10.1016/j.surfcoat.2025.131930 ↗
70. Highly dense passivation enhanced corrosion resistance of Ti2AlC MAX phase coating in 3.5 wt.% NaCl solution10.1016/j.corsci.2024.111820 ↗
71. Nanostructured coatings: review on processing techniques, corrosion behaviour and tribological performance10.3390/nano12081323 ↗
72. A systematic study of β-type Ti-based PVD coatings on magnesium for biomedical application10.1016/j.vacuum.2020.109850 ↗
73. Improved corrosion behavior and biocompatibility of porous titanium samples coated with bioactive chitosan-based nanocomposites10.3390/ma14216322 ↗
74. Structure and corrosion behavior of TiO2 thin films deposited by ald on a biomedical magnesium alloy10.3390/coatings11010070 ↗
75. Surface nano-architectures and their effects on the mechanical properties and corrosion behavior of Ti-based orthopedic implants10.1016/j.surfcoat.2012.10.023 ↗
76. Findings and perspectives of β-Ti alloys with biomedical applications: exploring beyond biomechanical and biofunctional behaviour10.1016/j.jmrt.2024.09.248 ↗
77. Corrosion characteristics of Ti and Al2O3/Ti thin films sputtered on 316LSS
78. Structure, modulus of elasticity, and corrosion resistance of Ti–20Nb–20Zr alloy10.1007/s11003-025-01007-5 ↗
79. Insights into laser powder bed fused β-type titanium alloy: investigating corrosion behavior and wear properties after post-heat treatment10.1016/j.jmrt.2025.06.120 ↗
80. Design, fabrication, and characterization of novel dental implants with porosity gradient obtained by selective laser melting10.1016/j.matdes.2025.113660 ↗