Improving the manufacturability and assessing the performance of rare earth zirconates for thermal barrier coatings
Source abstract
Abstract
Key aero-engine components are subject to gas stream temperatures above the melting point of their metal alloy, a demanding environment that requires the deployment of thermal barrier coatings (TBCs) for their operation. Electron-beam physical vapour deposition (EB-PVD) can produce TBCs with unique columnar microstructures, conferring them the strain compliance required to survive in the cyclic, high-strain, high-thermal load environment experienced by the rotating parts of the high-temperature turbine. Rare earth zirconates (REZs) are proposed as substitute materials of partially-yttria-stabilised zirconia (PYSZ) to operate at higher temperatures due to their ability to withstand CMAS (calcium‑magnesium-alumino-silicate) attack. On the other hand, the lower toughness of REZs makes them more susceptible to erosion damage during service, and some manufacturability issues have been noticed in previous studies. The current paper evaluates the manufacturability, CMAS resistance and erosion resistance of PYSZ and three REZ systems: gadolinium (GZ), neodymium (NZ) and lanthanum (LZ) zirconate. For the first time, successful NZ TBCs have been produced by EB-PVD, presenting a similar morphology, ease of manufacture and CMAS resistance to GZ, but inferior erosion resistance. LZ has compositional banding, lacks columnarity in La-rich regions, and has the lowest CMAS and erosion resistance of the REZs investigated. Co-evaporation of lanthana and PYSZ ingots increased compositional homogeneity of LZ, but the increased La content of the unoptimised process makes the coatings hygroscopic. The erosion resistance of the REZs is 6–10 times lower than PYSZ, but the study of their failure mechanisms indicates a potential improvement strategy by altering the coating morphology. • TBCs of gadolinium, neodymium and lanthanum zirconate deposited by EB-PVD. • Neodymium zirconate TBC was columnar and its composition was mostly homogeneous. • Neodymium zirconate slightly underperforms gadolinium in erosion, CMAS resistance. • Difficulty in depositing lanthanum zirconate due to differences in vapour pressures. • The compositional homogeneity of lanthanum zirconate was improved by coevaporation.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Nuclear Materials and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Maloney · 2001
2. Zirconates as new materials for thermal barrier coatings10.1111/j.1151-2916.2000.tb01506.x ↗
3. Low-thermal-conductivity rare-earth zirconates for potential thermal-barrier-coating applications10.1111/j.1151-2916.2002.tb00574.x ↗
4. Melting and crystallization of silicate systems relevant to thermal barrier coating damage10.1111/jace.13478 ↗
5. Equilibrium relationships between thermal barrier oxides and silicate melts10.1016/j.actamat.2016.08.077 ↗
6. Infiltration-inhibiting reaction of gadolinium zirconate thermal barrier coatings with CMAS melts10.1111/j.1551-2916.2007.02175.x ↗
7. Effect of processing and interface on the durability of single and bilayer 7YSZ / gadolinium zirconate EB-PVD thermal barrier coatings10.1016/j.surfcoat.2019.125107 ↗
8. Vapor deposited samarium zirconate thermal barrier coatings10.1016/j.surfcoat.2009.03.048 ↗
9. EB-PVD processing of pyrochlore-structured La2Zr2O7-based TBCs10.1016/j.surfcoat.2003.08.068 ↗
10. Degradation of La2Zr2O7 and other novel EB-PVD thermal barrier coatings by CMAS (CaO-MgO-Al2O3-SiO2) and volcanic ash deposits10.1016/j.surfcoat.2013.07.029 ↗
11. Review on advanced EB-PVD ceramic topcoats for TBC applications10.1111/j.1744-7402.2004.tb00182.x ↗
12. Thermal barrier coatings of rare earth materials deposited by electron beam-physical vapor deposition10.1016/j.jallcom.2010.04.160 ↗
13. Effect of Gd content on mechanical properties and erosion durability of sub-stoichiometric Gd2Zr2O710.1016/j.surfcoat.2016.12.045 ↗
14. Erosion of EB-PVD thermal barrier coatings10.1080/09603409.1998.11689572 ↗
15. ASTM · 2018
16. ASTM · 2022
17. Modelling evaporation in electron-beam physical vapour deposition of thermal barrier coatings10.1007/s42247-021-00284-5 ↗
18. Automated columnar microstructure analysis using CoCo (column counter): Insights from EB-PVD TBCs
19. Thermocyclic behavior of differently stabilized and structured EB-PVD TBCs
20. Microstructure refinement of EB-PVD gadolinium Zirconate thermal barrier coatings to improve their CMAS resistance10.3390/coatings13050905 ↗
21. Microstructure and cyclic lifetime of Gd and Dy-containing EB-PVD TBCs deposited as single and double-layer on various bond coats10.1016/j.surfcoat.2014.02.047 ↗
22. From fluorite to pyrochlore: characterisation of local and average structure of neodymium zirconate, Nd2Zr2O710.1016/j.jssc.2013.07.001 ↗
23. Perspectives on Pyrochlores, defect fluorites, and related compounds: building blocks for chemical diversity and functionality10.3389/fchem.2021.778140 ↗
24. Hot pressing of gadolinium zirconate pyrochlore10.1016/j.ceramint.2014.09.114 ↗
25. Kember · 2011
26. Review on advanced EB-PVD ceramic topcoats for TBC applications10.1111/j.1744-7402.2004.tb00182.x ↗
27. Microstructure of ZrO2 thermal barrier coatings applied by EB-PVD10.1016/S0921-5093(99)00576-6 ↗
28. High rate thick film growth10.1146/annurev.ms.07.080177.001323 ↗
29. YAlO3-a novel environmental barrier coating for Al2O3/Al2O3-ceramic matrix composites10.3390/coatings9100609 ↗
30. The thermal expansion of lanthanum Zirconate ceramics10.1134/S2075113325701400 ↗
31. An investigation into RESZ (RE = Yb, Er, Gd, Sm) materials for CMAS resistance in thermal barrier coatings10.1016/j.jeurceramsoc.2024.01.041 ↗
32. Erosion performance of gadolinium Zirconate-based thermal barrier coatings processed by suspension plasma spray10.1007/s11666-016-0479-4 ↗
33. A comparison between the erosion behaviour of thermal spray and electron beam physical vapour deposition thermal barrier coatings10.1016/S0043-1648(99)00214-8 ↗
34. The effect of TBC morphology on the erosion rate of EB PVD TBCs10.1016/j.wear.2004.04.011 ↗
35. A review of the erosion of thermal barrier coatings10.1088/0022-3727/40/16/R01 ↗