journal article·2026-02Open access

Retaining crystallinity of as-deposited thermoelectric Fe2VAl-based thin films grown from DCMS and HiPIMS

L. Enzlberger, B. Schmid, L. Mitterhuber-Gressl, T. Wojcik, S. Kolozsvári, P.H. Mayrhofer

Abstract

Thermoelectric materials have gained much attention in recent years due to their ability to directly interconvert electrical and thermal energy via the Seebeck/Peltier effect. Their appeal for application in energy harvesting and solid-state cooling is however currently held back, as current state-of-the-art systems rely on rare and/or hazardous elements. Efforts to replace them with more abundant and environmentally benign alternatives have shown Heusler-alloys to be attractive candidates with thin film Fe 2 V 0.8 W 0.2 Al achieving a massive Figure of Merit, but requiring extensive post-processing to achieve crystallinity. Here, we report the direct deposition of this material in a crystalline, fully disordered W-type body-centered cubic (bcc) structure using direct current magnetron sputtering (DCMS) and high-power impulse magnetron sputtering (HiPIMS). Structural analyses confirm the formation of crystalline Heusler Phases in the as-deposited state, even at room temperature, eliminating the need for prolonged annealing. Transport measurements reveal low thermal conductivity (2.12 W/m∙K), low resistivity (≈240 μΩ∙cm) and a moderate Seebeck-coefficient (−55 μV/K), resulting in a viable Figure of Merit (ZT ≈ 0.1). These findings demonstrate an energy-efficient route in the fabrication of thermoelectric thin films from earth-abundant, non-toxic elements to be used for sustainable energy conversion. • Crystalline and fully disordered W-type bcc-Fe 2 V 0.8 W 0.2 Al in all cases from room temperature up to 500°C in the as-deposited state • Demonstrated the viability of HiPIMS for the production of thermoelectric thin films from non-toxic and earth-abundant elements • Low thermal conductivity (≈ 2 W/m∙K) and moderate Seebeck-coefficient (up to -55 μV /K) lead to a viable Figure of Merit (≈ 0.1) • Increase in deposition pressure appears overall beneficial and leads to an increase in thermopower and a decrease in thermal conductivity • Identified competing growth of (220)- and (440)-orientation linked to deposition parameters and Al-deficiency
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Heusler alloys: electronic and magnetic properties · Advanced Thermoelectric Materials and Devices · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Champier · Energ. Conver. Manage. · 2017 · 140 · 16710.1016/j.enconman.2017.02.070 ↗
2. Pourkiaei · Energy · 2019 · 18610.1016/j.energy.2019.07.179 ↗
3. Sifi · Optik · 2021 · 24710.1016/j.ijleo.2021.168035 ↗
4. Garmroudi · Nat. Commun. · 2022 · 13 · 359910.1038/s41467-022-31159-w ↗
5. Tarachand · Mater. Today Phys. · 2024 · 48
6. Mikami · Thin Solid Films · 2010 · 518 · 279610.1016/j.tsf.2009.08.029 ↗
7. McCarty · J. Electron. Mater. · 2013 · 42 · 150410.1007/s11664-012-2299-8 ↗
8. Riffat · Ap. Therm. Eng. · 2003 · 23 · 91310.1016/S1359-4311(03)00012-7 ↗
9. Zheng · Ap. Therm. Eng. · 2014 · 62 · 6910.1016/j.applthermaleng.2013.09.008 ↗
10. Tan · Phil. Trans. R. Soc. A · 2019 · 377 · 2018045010.1098/rsta.2018.0450 ↗
11. Mamur · Renew. Sustain. Energy Rev. · 2018 · 82 · 415910.1016/j.rser.2017.10.112 ↗
12. Levin · Adv. Funct. Mater. · 2012 · 22 · 276610.1002/adfm.201103049 ↗
13. Gomell · Scr. Mater. · 2020 · 186 · 37010.1016/j.scriptamat.2020.04.037 ↗
14. Maier · Acta Mater. · 2016 · 121 · 12610.1016/j.actamat.2016.08.080 ↗
15. Futakani · Appl. Phys. Lett. · 2018 · 112
16. Yamada · Appl. Phys. Express · 2017 · 10
17. Gao · Acta Mater. · 2020 · 200 · 84810.1016/j.actamat.2020.09.067 ↗
18. Alleno · Metals · 2018 · 8 · 86410.3390/met8110864 ↗
19. Mikami · J. Appl. Phys. · 2012 · 11110.1063/1.4710990 ↗
20. Terazawa · J. Electron. Mater. · 2012 · 41 · 134810.1007/s11664-011-1862-z ↗
21. Graf · Prog. Solid State Ch. · 2011 · 39 · 110.1016/j.progsolidstchem.2011.02.001 ↗
22. Hinterleitner · Nature · 2019 · 576 · 8510.1038/s41586-019-1751-9 ↗
23. Alleno · Phys. Chem. Chem. Phys. · 2020 · 22 · 2254910.1039/D0CP03738A ↗
24. Yadav · ACS Appl. Mater. Interfaces · 2024 · 16 · 5057610.1021/acsami.4c06329 ↗
25. Anders · Surf. Coat. Technol. · 2014 · 257 · 30810.1016/j.surfcoat.2014.08.043 ↗
26. Vetter · J. Appl. Phys. · 2023 · 13410.1063/5.0159292 ↗
27. Ganesan · J. Appl. Phys. · 2017 · 12110.1063/1.4977824 ↗
28. Ganesan · J. Phys. D Appl. Phys. · 2016 · 4910.1088/0022-3727/49/24/245201 ↗
29. Holtzer · Surf. Coat. Technol. · 2014 · 250 · 3210.1016/j.surfcoat.2014.02.007 ↗
30. Bakhit · J. Vac. Sci. Technol. A · 2018 · 3610.1116/1.5026445 ↗
31. Diack-Rasselio · J. Alloys Compd. · 2022 · 92010.1016/j.jallcom.2022.166037 ↗
32. Baba · Jpn. J. Appl. Phys. · 2009 · 48 · 05EB0410.1143/JJAP.48.05EB04 ↗
33. Chase · J. Phys. Chem. Ref. Data · 1998 · Monograph 9 · 1881
34. Hinterleitner · Phys. Rev. B · 2020 · 10210.1103/PhysRevB.102.075117 ↗
35. Camuffo · 2019 · 409
36. Parzer · PRX Energy · 2024 · 310.1103/PRXEnergy.3.033006 ↗