journal article·2026-03Open access

Silver-enhanced ZrN-MoSN composite films via magnetron sputtering: Insighting into the microstructure and optimizing self-lubricating properties

Jing Luan, Zijun Cao, Hongying Lu, Songtao Dong, Lei Wang, Takayuki Tokoroyama, Hongbo Ju

Abstract

The multi-lubricant synergistic strategy is widely recognized as one of the most effective approaches for developing solid self-lubricant materials to replace conventional oil- or grease-based lubricant systems. This study employed RF magnetron sputtering to dope Ag into an optimized ZrN–MoSN system, with the aim of enhancing its tribological performance. Ag incorporation induced nanoscale structural heterogeneity within the film, resulting in a multiphase architecture comprising face-centered cubic (fcc) ZrN, fcc Ag, Mo–S–N species (hexagonal close-packed (hcp) MoS 2 , amorphous Mo(SN)ₓ, and MoS₂(N₂), and Ag–S-based compounds). Although Ag addition reduced the mechanical strength of the film, it markedly enhanced its self-lubricant capacity at both room temperature (RT) and elevated temperatures (500 °C). Tribological performance is driven by synergistic lubrication of multiple tribo-phases. At room temperature, the film contains MoS₂, MoO₃, and Ag₂Mo₂O₇, which transform at elevated temperatures into an oxide-dominated assemblage, primarily Ag₂MoO₄, revealing the temperature-dependent evolution of the tribo-phase. However, the trade-off between friction reduction and wear resistance persists, primarily owing to reduced hardness and the formation of mechanically fragile tribo-layers. • ZrN–MoSN–Ag composite films were deposited by RF magnetron sputtering. • Ag addition enhances 500°C self-lubricating despite reduced hardness. • High temperature lubrication mainly governed by tribochemical formation of Ag₂MoO₄.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Tribology and Wear Analysis · Lubricants and Their Additives

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Contact cracking and delamination of thin solid lubricating films on deformable substrates10.1016/j.triboint.2021.107181 ↗
2. Tribological properties of Mo2N films at elevated temperature10.3390/coatings9110734 ↗
3. Study on the effect of counter ball materials on fretting behavior of solid lubricating films10.1016/j.wear.2023.204957 ↗
4. Crystal structure and high temperature tribological behavior of niobium aluminum nitride films10.1016/j.mtla.2018.08.025 ↗
5. Microstructure evolution and indentation cracking behavior of MoN multilayer films10.1016/j.surfcoat.2018.02.074 ↗
6. Enhancement of the tribological behavior of self-lubricating nanocomposite Mo2N/Cu films by adding the amorphous SiNx10.1016/j.surfcoat.2021.127565 ↗
7. Deciphering the mechanical strengthening mechanism: soft metal doping in ceramic matrices—a case study of TiN-Ag films10.1016/j.matdes.2024.113489 ↗
8. Deciphering the mechanical strengthening mechanism: soft metal doping in ceramic matrices—a case study of TiN-Ag films10.1016/j.matdes.2024.113489 ↗
9. Enhancement on the hardness and oxidation resistance property of TiN/Ag composite films for high temperature applications by addition of Si10.1016/j.vacuum.2022.111752 ↗
10. The influences of Ag content on the friction and wear properties of TiCN–Ag films10.1016/j.vacuum.2021.110719 ↗
11. Tribological and mechanical properties of ZrxNy films obtained by HiPIMS in DOMS mode10.1016/j.triboint.2023.108960 ↗
12. Tribological behavior of plasma-sprayed Al2O3-based cermet coatings
13. Sliding wear behavior of thermally sprayed 75/25 Cr3C2/NiCr wear-resistant coatings
14. An eco-strategy for development of more sustainable coatings10.1016/j.porgcoat.2024.108781 ↗
15. Fabrication and properties of eco-friendly CoTiO3/TiO2 green coatings on titanium by plasma electrolytic oxidation10.1016/j.ceramint.2025.08.448 ↗
16. Magnetically driven 3D cellulose film for improved energy efficiency in solar evaporation10.1021/acsami.0c21384 ↗
17. Exploring tribological characteristics of ZrN-MoSN composite films fabricated via RF magnetron sputtering: insights from microstructure and performance analysis10.1016/j.surfcoat.2024.130813 ↗
18. Insights into tribological performances of magnetron-sputtered Si-B-C-N films in air and seawater conditions10.1016/j.ceramint.2025.01.292 ↗
19. Tribo-oxidation of multilayer ZrN/CrN coatings under dry sliding friction at elevated temperatures10.1007/s11182-025-03374-7 ↗
20. RF magnetron sputtered Nb–V–N composite coatings for high-temperature self-lubricant applications10.1016/j.vacuum.2023.112657 ↗
21. Influence of tribological properties of Zr-ZrN (Zr, Cr, Al) N and Zr-ZrN-(Zr, Mo, Al) N multilayer nanostructured coatings on the cutting properties of coated tools during dry turning of Inconel 718 alloy
22. Influence of Al content on the microstructure and properties of the CrAlN coatings deposited by arc ion plating10.1007/s40195-017-0656-6 ↗
23. Nano-multilayered ZrN–Ag/Mo–S–N film design for stable anti-frictional performance at a wide range of temperatures10.1007/s40544-024-0943-y ↗
24. Multilayer Mo2N-Ag/SiNx films for demanding applications: morphology, structure and temperature-cycling tribological properties10.1016/j.matdes.2022.111128 ↗
25. Mutually enhanced mechanical and tribological properties in magnetron sputtered Mo2N/Ag-SiNx self-lubricating multilayered films via epitaxial growth design10.1016/j.ceramint.2025.07.123 ↗
26. Effect of Cu content on the mechanical and tribological properties of MoN-Cu coatings deposited by HiPIMS10.1016/j.surfcoat.2025.131769 ↗
27. Enhancing the thermoelectric performance of BiCuSeO ceramics by entropy engineering10.1016/j.ceramint.2025.01.499 ↗
28. The effect of trace solute Au atoms on the phase structure, mechanical and self-lubricating properties of MoSi2 films10.1016/j.ceramint.2023.08.096 ↗
29. Adaptive Mo2N/MoS2/Ag tribological nanocomposite coatings for aerospace applications10.1007/s11249-007-9286-x ↗
30. Mechanical and tribology performance of nanostructured ZrN-Cu coatings obtained by hybrid HiPIMS-DCMS technology10.1016/j.surfcoat.2024.131579 ↗
31. Investigation on the self-lubricating properties of boronized CoCrFeNiMn high entropy alloy in corrosive environments10.1016/j.surfcoat.2024.131030 ↗
32. Comparison of the tribological and antimicrobial properties of CrN/Ag, ZrN/Ag, TiN/Ag, and TiN/Cu nanocomposite coatings10.1016/j.surfcoat.2010.07.029 ↗
33. Synergistic lubrication of Ag and Ag2MoO4 nanoparticles anchored in plasma-sprayed YSZ coatings: remarkably-durable lubricating performance at 800°C10.1016/j.triboint.2020.106670 ↗
34. The influence of Ag contents on the microstructure, mechanical and tribological properties of ZrN-Ag films10.1016/j.vacuum.2017.10.029 ↗
35. An insight on the MoS2 tribo-film formation to determine the friction performance of Mo-S-N sputtered coatings
36. Study on tribological properties of Ag-MoS2 self-lubricating films10.1016/j.surfcoat.2025.132003 ↗
37. Structural, mechanical and tribological properties of Mo-S-N solid lubricant films10.1016/j.surfcoat.2016.04.040 ↗
38. Structure, mechanical and tribological properties of Mo-S-N solid lubricant coatings10.1016/j.apsusc.2019.03.294 ↗
39. Design of DC semi-industrial magnetron-sputtered W-Ti-N/Ag composite films: insights into the microstructure and mechanical properties10.1016/j.surfcoat.2025.131942 ↗
40. Self-lubricating mechanisms in magnetron-sputtered Cr–Mo–N/Ag composite films: role of Mo content and tribo-oxide evolution10.1016/j.surfcoat.2025.132546 ↗
41. In situ and ex situ studies of microstructure evolution during high-temperature oxidation of ZrN hard coatings10.1016/j.scriptamat.2014.10.024 ↗
42. Responses of TMDs-metals composite films to atomic oxygen exposure10.1016/j.jallcom.2018.06.311 ↗
43. Tribological properties and transfer behavior of WS2-Ag nanocomposite films with structure evolution for aerospace application10.1016/j.apsusc.2024.160928 ↗
44. Synthesis of nanocrystalline Ag2S in aqueous solution10.1016/S0167-2738(00)00497-5 ↗
45. Preparation of self-lubricating coating by mechanical milling10.1108/ILT-11-2019-0471 ↗
46. Physical properties of silver oxide thin films by pulsed laser deposition: effect of oxygen pressure during growth10.1088/0022-3727/42/13/135411 ↗
47. Improvement on the oxidation resistance and tribological properties of molybdenum disulfide film by doping nitrogen10.1016/j.matdes.2019.108300 ↗
48. Structure, mechanical, tribological properties and corrosion resistance of C/N dual doping Mo-S-C-N films10.1016/j.apsusc.2023.158905 ↗
49. Influence of silicon on the microstructure and the chemical properties of nanostructured ZrN-Si coatings deposited by means of pulsed-DC reactive magnetron sputtering10.1016/j.apsusc.2019.03.128 ↗
50. Raman spectra and structural analysis in ZrOxNy thin films10.1016/j.tsf.2006.07.039 ↗
51. In-situ formation of onion-like carbon film by tribo-induced catalytic degradation of hydrocarbon: effect of lubrication condition and load10.1016/j.cej.2023.141566 ↗
52. Tribological behavior of MoWN-Ag composite coating in a wide temperature range10.1016/j.surfcoat.2025.132570 ↗
53. Structural evolution of a carbon nanotube film under sliding wear: from a forest to self-lubricating nanocomposite tribofilm10.1016/j.carbon.2025.120224 ↗
54. Enhancement of the mechanical and tribological properties of self-lubricant Mo2N-Ag composite film by adding amorphous SiNx10.1016/j.ceramint.2023.12.181 ↗
55. Preparation and tribological properties of NiCr-Mo-Ag-O/Mo-V-Ag-O bilayer film at RT-1000 °C10.1016/j.jmrt.2023.07.207 ↗
56. Evaluation under temperature cycling of the tribological properties of Ag-SiNx films for green tribological applications10.1016/j.ceramint.2023.06.267 ↗
57. Design and magnetron sputtering of nanomultilayered W2N/Ag-SiNx films: microstructural insights and optimized self-lubricant properties from room temperature to 500°C10.1016/j.ceramint.2024.07.292 ↗
58. Microstructure and tribological performance of adaptive MoN-Ag nanocomposite coatings with various Ag contents10.1016/j.wear.2021.204170 ↗
59. Tribological performance under different environments of Ti-C-N composite films for marine wear-resistant parts10.1007/s12613-022-2551-z ↗