Characterisation and performance of coated SiAlON cutting tools for Inconel 718 machining
Source abstract
Abstract
Physical vapor deposition (PVD) with High Power Impulse Magnetron Sputtering (HiPIMS) presents a highly promising surface modification approach for the performance enhancement of SiAlON cutting tools in the machining of Nickel-based superalloys alloys, which are renowned for their challenging machinability. This study systematically investigates the coating roughness, microstructural characteristics, and cutting performance of HiPIMS-coated SiAlON tools in Inconel 718 milling. The deposited multilayer coatings were comprehensively analysed using advanced characterisation techniques, including scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Cutting tests were carried out with different tool geometries and machining conditions, as well as coated and uncoated tools—factors that highly influence tool's performance. The HiPIMS coating demonstrated improved thermal stability and reduced susceptibility to diffusion-related deterioration—factors that are critical in managing the high temperatures encountered in superalloy machining. These results underscore the potential of HiPIMS technology to significantly extend tool longevity and enhance machining efficiency, establishing it as a viable solution for high-performance manufacturing sectors. • Coated SiAlON tools studied for high-speed machining of Inconel 718 superalloy • Coating effectiveness depends on tool geometry; improved performance for RPGN 090300. • Wear mechanisms include adhesion, notch wear, chipping, and built-up edge formation. • No significant diffusion wear detected; material transfer confirmed by EDS analysis • Coated tools enable high material removal rates at speeds ≥800 m/min with optimization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Metal and Thin Film Mechanics · Erosion and Abrasive Machining
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Machinability of nickel-base super alloys: a general review10.1016/S0924-0136(97)00429-9 ↗
2. Roughing milling with ceramic tools in comparison with sintered carbide on nickel-based alloys10.3390/coatings11060734 ↗
3. Cost-effective fabrication of α-SiAlON ceramics with CeO2 addition for cutting tool applications10.1111/ijac.14257 ↗
4. Ultra high speed turning of Inconel 718 with SiAlON ceramic tools10.4028/www.scientific.net/AMR.126-128.653 ↗
5. Plasma-beam processing of tools made of sialon dielectric ceramics to increase wear resistance when cutting nickel–chromium alloys10.3390/coatings12040469 ↗
6. Wear mechanisms and notch formation of whisker-reinforced alumina and sialon ceramic tools during high-speed turning of inconel 71810.3390/ma15113860 ↗
7. Tribological properties of multilayer CVD coatings deposited on sialon ceramic milling inserts
8. A state-of-the-art review on tool wear and surface integrity characteristics in machining of superalloys10.1016/j.cirpj.2021.08.005 ↗
9. Microwave synthesis of duplex α/β-sialon ceramic cutting inserts: modifying m, n, z values, synthesis temperature, and excess Y2O3 synthesis additive10.1007/s40145-021-0559-x ↗
10. Analysis of tool wear patterns in finishing turning of inconel 71810.1016/j.wear.2012.11.004 ↗
11. Development of dlc-coated solid sialon/tin ceramic end mills for nickel alloy machining: problems and prospects10.3390/coatings11050532 ↗
12. On the wear mechanisms of ceramic round inserts in high-speed turning of Inconel 71810.1016/j.wear.2025.205866 ↗
13. Comparative assessment of tool wear and surface topography after superfinish turning of Inconel 718 with carbide and ceramic inserts10.3390/app15084265 ↗
14. An assessment of tool life in drilling of Inconel 718 using cathodic arc PVD coated carbide bits10.1007/s00170-022-09057-8 ↗
15. Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling10.1016/j.triboint.2013.02.035 ↗
16. Cutting parameters for roughing turning of alloy 625 clad using ceramic inserts
17. Tool life and wear mechanisms of cvd coated and uncoated sialon ceramic milling inserts when machining aged inconel 718
18. Exploring the potential of high-power impulse magnetron sputtering for nitride coatings: advances in properties and applications10.3390/coatings15020130 ↗
19. Wear resistance of (Ti,Al)N metallic coatings for extremal working conditions10.3390/coatings11020157 ↗
20. Cutting performance and coated tool wear mechanisms in laser-assisted milling k24 nickel-based superalloy
21. High Si content TiSiN films with superior oxidation resistance10.1016/j.surfcoat.2020.126087 ↗
22. Wear behavior phenomena of TiN/TiAlN HiPIMS PVD-coated tools on milling Inconel 71810.3390/met13040684 ↗
23. The performance of TiAlSiN coated cemented carbide tools enhanced by inserting Ti interlayers10.3390/met9090918 ↗
24. Effect of cutting speed on cutting forces and wear mechanisms in high-speed face milling of Inconel 718 with Sialon ceramic tools10.1007/s00170-013-5206-4 ↗
25. Influence of cutting tool geometrical parameters on tool wear in high-speed milling of inconel 718 curved surface10.1177/0954405417716495 ↗