Analysis of sensing modalities for Electrode-Induction Gas atomisation of metal powders
Source abstract
Abstract
Electrode-Induction Gas atomisation is a crucial part of the thermal coating process, as it generates the metal powder that is used within various coating processes. A major field of analysis for powder atomisation is determining the powder yield quantity that is generated during the process. Current approaches rely on simulating the atomisation process, which fails to capture real-world physics that may interfere with the estimation of the powder yield. In this work, we outline how different sensing modalities can be used to detect the point of atomisation and how we can monitor the increasing amount of powder that is generated. Our approach covers three different kinds of sensors – contact, non-contact and visual – which can be used in parallel which each other to detect powder atomisation and collection. Using data collected from sensors attached to an Electrode-Induction Gas atomiser, we show how signal processing techniques can be used to extract information about the powder yield, thus enabling the collection of quantitative information about the powder yield. The results from analysing the signals directly link to microstructure characterisation of the generated powder which shows how sensing architectures can be used for in situ measurements of atomisation parameters. Our work demonstrates the importance of using sensors to analyse processes and demonstrates a quantitative approach to modelling the creation and yield of powder in metal atomisation, and we provide discussion topics about future directions in the field.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Fluid Dynamics and Heat Transfer · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A review on thermal spray coating processes
2. Monitoring of argon plasma in a coating manufacturing process by utilising IR imaging techniques10.1016/j.jmapro.2025.01.093 ↗
3. The effects of particle size and surface coating on the cytotoxicity of nickel ferrite10.1016/j.biomaterials.2005.02.036 ↗
4. Effect of particle size on the microstructure and properties of kinetic sprayed nickel coatings10.1016/j.surfcoat.2010.03.046 ↗
5. Effect of particle size on surface-coating enhancement of pool boiling heat transfer10.1016/j.ijheatmasstransfer.2014.09.052 ↗
6. Advances in powder metallurgy: Properties, processing and applications
7. Influence of liquid metal properties on particle size of inert gas atomised powders10.1179/pom.1996.39.1.44 ↗
8. Experimental and numerical investigations on molten metal atomization techniques – A critical review10.1016/j.apt.2022.103809 ↗
9. Numerical modeling and optimization of electrode induction melting for inert gas atomization (EIGA)10.1007/s11663-020-01934-5 ↗
10. A novel sensing template utilising data fusion for large volume assembly
11. IoT and machine learning for in-situ process control using laser based additive manufacturing (LBAM) case study10.1016/j.procir.2021.11.306 ↗
12. Effect of electrode induction melting gas atomization process on fine powder yields: Diameter of free-fall gas atomizer10.1007/s11665-022-07366-3 ↗
13. Effect of electrode induction melting gas atomization process on fine powder yields: Continuous metal melt flow
14. Numerical model of electrode induction melting for gas atomization10.1108/03321641111152612 ↗
15. High speed imaging and Fourier analysis of the melt plume during close coupled gas atomisation10.1179/174329409X409549 ↗
16. Effect of gas mach number on the flow field of close-coupled gas atomization, particle size and cooling rate of as-atomized powder: Simulation and experiment10.1016/j.apt.2023.104007 ↗
17. Monitoring of metal additive manufacturing processes via in-situ machine sensorization
18. Novel sensorized additive manufacturing-based enlighted tooling concepts for aeronautical parts10.1038/s41598-024-68786-w ↗
19. Calibrated closed-loop control to reduce the effect of geometry on mechanical behaviour in directed energy deposition10.1016/j.jmatprotec.2022.117823 ↗
20. Systematic review of digital twin technology and applications10.1186/s42492-023-00137-4 ↗
21. A deep look into the spray coating process in real-time—the crucial role of x-rays10.1088/0953-8984/28/40/403003 ↗
22. Sensors and techniques used to monitor processing parameters during spray atomization and deposition10.1007/BF00356110 ↗
23. A pore morphological study of gas-atomized Ti-6Al-4V powders by scanning electron microscopy and synchrotron X-ray computed tomography10.1016/j.powtec.2018.02.053 ↗
24. Mistras · 2025
25. Polytec · 2025
26. Comparison of laser Doppler vibrometer with contact sensors for monitoring bridge deflection and vibration10.1016/j.ndteint.2004.06.012 ↗
27. Prophesee · 2025
28. Event-based vision: A survey10.1109/TPAMI.2020.3008413 ↗
29. Miller · 2025
30. Mállat · 2008
31. Alexander · 2017
32. Murphy · 2022
33. Scipy 1.0: Fundamental algorithms for scientific computing in python10.1038/s41592-019-0686-2 ↗
34. Event-based visual flow10.1109/TNNLS.2013.2273537 ↗
35. Fast event-based harris corner detection exploiting the advantages of event-driven cameras
36. Fast event-based optical flow estimation by triplet matching10.1109/LSP.2023.3234800 ↗
37. DiscretizationNet: A machine-learning based solver for Navier–Stokes equations using finite volume discretization10.1016/j.cma.2021.113722 ↗
38. Deep generative models in engineering design: A review
39. Generative AI vs. Traditional databases: Insights from industrial engineering applications10.3390/publications13020014 ↗