journal article·2026-04Open access

NiCrBSi-based coatings with WC-Co reinforcement and h-BN solid lubrication: microstructure and wear behavior after flame and HVOF spraying with flame fusing

Oleksandr Lypchanskyi, Bianca Preuß, Wolfgang Wisniewski, Maximilian Grimm, Thomas Grund, Marvin Schulz, Wolfgang Wietheger, Andreas Undisz, Thomas Lampke

Abstract

Thermally sprayed self-fluxing NiCrBSi-based coatings modified with WC-Co as a reinforcing phase and h-BN as a solid lubricant were produced using conventional flame spraying and high-velocity oxygen-fuel (HVOF) spraying, followed by flame fusing to improve densification and interfacial bonding. The influence of the spraying energy input, coating composition, and post-deposition flame fusing on the microstructural evolution and tribological performance at room temperature (RT) and 400 °C are investigated. Novel insights into the stabilization and distribution of carbides (Cr 7 C 3 ), borides (CrB) and Ni-based intermetallic phases (Ni 3 B, Ni 31 Si 12 ), as well as the persistence, partial degradation, and anchoring behavior of h-BN particles are provided. Flame spraying leads to thicker coatings with splat-related inhomogeneities, whereas HVOF spraying produces thinner, denser coatings with finer microstructures. Flame fusing substantially modifies both coating series by eliminating splat boundaries, inducing partial remelting, and promoting the formation of eutectic structures and a dendrite-containing fusion zone that includes Mo 6 Ni 6 C. Fretting wear tests under severe reciprocating conditions at RT and 400 °C reveal a strong dependence of wear behavior on coating composition, microstructure, and processing history. Flame fusing the HVOF coatings induces a partial decomposition of WC and the formation of brittle W 2 CoB 2 , resulting in increased microcracking and higher wear rates of ~0.7–1.5 × 10 −4 mm 3 /Nm at RT. However, the wear rates at RT and 400 °C remain comparable due to embrittlement and the development of oxide-based tribolayers. Analyses of the worn surfaces indicate a temperature-dependent shift in the dominant wear mechanisms—from adhesive wear and surface fatigue at RT to mixed abrasive–adhesive wear combined with tribochemical oxidation at 400 °C, where oxidized tribolayers and plasticized splats facilitate lubrication and coefficient of friction (COF) stabilization. These findings provide new insights into the role of microstructural heterogeneities, WC decomposition, dendrite-containing fusion zones, and h-BN particle behavior in governing the tribological response of thermally sprayed coatings, outlining a pathway toward advanced coating solutions for high-performance valve components and related tribological applications. • h-BN and WC-Co particles exhibit distinct stability and interfacial bonding. • Flame fusing enhances densification and promotes metallurgical inter-splat bonding. • Partially degraded h-BN causes debris and reduces lubrication efficiency. • Flame fusing can form dendritic fusion zones and induces WC decomposition. • Process–structure design can improve wear resistance for high-temperature service.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (86)

Show source-provided references
1. Tribological study of NiCrBSi coating obtained by different processes10.1016/S0301-679X(02)00144-5 ↗
2. Different approaches to the investigation and testing of the Ni-based self-fluxing alloy coatings—a review. Part 1: general facts, wear and corrosion investigations10.1080/10402004.2014.927547 ↗
3. Effects of thermal spraying technique on the remelting behavior of NiCrBSi coatings10.1016/j.surfcoat.2022.128669 ↗
4. Comparison of Ni-based self-fluxing Remelted coatings for Wear and corrosion applications10.3390/ma14123293 ↗
5. Wear resistance evaluation of self-fluxing nickel-based coating deposited on AISI 4340 steel by atmospheric plasma spray10.3390/met14050532 ↗
6. Effect of Cu content on microstructure evolution and tribological behaviors of Ni60 composite coatings on 45# steel by laser cladding10.1016/j.optlastec.2022.108549 ↗
7. The effect of WC-CoCr content on hardness and tribological properties of NiCrBSi coatings fabricated by the HVOF process10.1016/j.surfcoat.2023.129506 ↗
8. Properties of NiCrBSi coating, as sprayed and remelted by different technologies10.1016/j.surfcoat.2014.05.009 ↗
9. Wear behaviour of flame sprayed NiCrBSi coating remelted by flame or by laser10.1016/j.wear.2006.05.009 ↗
10. An investigation of the mechanical properties and wear resistance of NiCrBSi coatings carried out by in situ laser remelting10.1016/j.wear.2011.01.025 ↗
11. Effect of high-temperature furnace treatment on the microstructure and corrosion behavior of NiCrBSi flame-sprayed coatings10.1016/j.corsci.2014.07.057 ↗
12. Microstructure and interface characteristics of NiCrBSi thick coating remelted by TIG process10.1016/j.vacuum.2018.07.020 ↗
13. Application of HVOF thermal spraying to solve corrosion problems in the petroleum industry—an industrial note10.1007/BF02647419 ↗
14. “Hybrid” plasma spraying of NiCrAlY+Al 2 O 3 + h -BN composite coatings for sliding wear applications10.1016/j.wear.2017.02.027 ↗
15. Hydrothermal synthesis of MoS2 into flame-sprayed Ni60 coating towards superior tribological performance10.1007/s11665-022-07135-2 ↗
16. Laser cladding Ni-based alloy/nano-Ni encapsulated h-BN self-lubricating composite coatings10.1016/j.surfcoat.2017.06.079 ↗
17. Solid lubrication at high-temperatures—a review10.3390/ma15051695 ↗
18. Clauss · 1972
19. Solid lubricant materials for high temperature application: a review10.1016/j.matpr.2022.06.030 ↗
20. High temperature solid-lubricating materials: a review10.1016/j.triboint.2018.12.037 ↗
21. High-temperature solid lubricants and self-lubricating composites: a critical review10.3390/lubricants10080177 ↗
22. Hexagonal boron nitride for extreme environment application10.1016/j.diamond.2024.111410 ↗
23. Construction of AuNPs/h-BN nanocomposites by using gold as interfacial electron transfer mediator with highly efficient degradation for levofloxacin hydrochloride and hydrogen generation10.1016/j.apsusc.2020.146336 ↗
24. Boron nitride (BN) and BN composites for high-temperature applications10.1016/j.jeurceramsoc.2007.09.005 ↗
25. Tribological properties of metal matrix-graphite particle composites10.1179/imr.1992.37.1.129 ↗
26. Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites10.1016/j.wear.2010.08.013 ↗
27. Effects of hexagonal boron nitride and sintering temperature on mechanical and tribological properties of SS316L/h-BN composites10.1016/j.matdes.2012.11.038 ↗
28. Thermally sprayed coatings for the valve industry10.1002/mawe.202100032 ↗
29. Tribological behavior of laser thermal sprayed Cr3 C2 –NiCr + 10%Ni/MoS2 composite coating on H13 hot work mould steel10.1088/2053-1591/ab5ec6 ↗
30. An advanced self-lubricating ceramic composite with the addition of core-shell structured h-BN@Ni powders10.1016/j.ijrmhm.2017.12.038 ↗
31. Core-shell structured h-BN@Ni reinforced CoCrNi-based self-lubricating composites10.1016/j.surfcoat.2022.128939 ↗
32. Co-growing mechanism of γ/γ′ eutectic on MC-type carbide in Ni-based single crystal superalloys10.1016/j.jallcom.2019.04.067 ↗
33. The metallurgical structure of as-solidified Ni-Cr-B-Si-C hardfacing alloys10.1007/BF00540502 ↗
34. Microstructures and mechanical properties of metallic NiCrBSi and composite NiCrBSi–WC layers manufactured via hybrid plasma/laser process10.1016/j.apsusc.2010.11.062 ↗
35. Influence of the deposition techniques on the mechanical properties and microstructure of NiCrBSi coatings10.1016/j.jmatprotec.2007.11.042 ↗
36. Influences of flame remelting and WC-co addition on microstructure, mechanical properties and corrosion behavior of NiCrBSi coatings manufactured via HVOF process
37. Effects of remelting processes on porosity of NiCrBSi flame sprayed coatings10.1179/1743294415Y.0000000107 ↗
38. Novel utilization of liquid feedstock in high velocity air fuel (HVAF) spraying to deposit solid lubricant reinforced wear resistant coatings10.1016/j.jmatprotec.2021.117203 ↗
39. High-temperature oxidation and erosion of HVOF sprayed NiCrSiB/Al2O3 and NiCrSiB/WC Co coatings10.1016/j.apsadv.2021.100191 ↗
40. Microstructure and performance of NiCrBSi coatings prepared by modulated arc currents using powder plasma transferred arc welding technology10.1016/j.apsusc.2023.159065 ↗
41. The eta carbides of mo-fe, mo-co, and mo-ni
42. Die Kristallstruktur von W2 Co B2 und isotypen Phasen10.1007/BF00905254 ↗
43. Formation of an amorphous phase in thermally sprayed WC-Co10.1007/BF02647520 ↗
44. Effect of Ti addition on microstructure and corrosion properties of laser cladded WC-Co/NiCrBSi(Ti) coatings10.1016/j.apsusc.2019.144349 ↗
45. A comparison between the corrosion resistances of some HVOF-sprayed metal alloy coatings10.1016/j.surfcoat.2008.04.056 ↗
46. Laser induction hybrid rapid cladding of WC particles reinforced NiCrBSi composite coatings10.1016/j.apsusc.2010.02.078 ↗
47. Effects of hBN content and particle size on microstructure, mechanical and tribological properties of NiCr-Cr3C2-hBN coatings10.1016/j.surfcoat.2023.130330 ↗
48. Analysis of grain structures and impurity distribution in mc-silicon grown by directional solidification: computational and experimental approach10.1016/j.apsadv.2022.100346 ↗
49. Two modes of grain boundary pinning by coherent precipitates10.1016/j.actamat.2017.06.031 ↗
50. Effect of a moving flame on the temperature of polymer coatings and substrates10.1016/j.porgcoat.2010.09.018 ↗
51. Effect of Nb0.5 and Mo0.75 addition on in-vitro corrosion and wear resistance of high-speed laser metal deposited Al0.3CrFeCoNi high-entropy alloy coatings10.1016/j.apsadv.2025.100710 ↗
52. Enhancing corrosion resistance and bioactive behavior of porous metallic scaffolds through electrochemical coatings10.1016/j.apsadv.2025.100723 ↗
53. High-speed laser directed energy deposition of Ni60 on 38CrMoAl steel: crack inhibition and microstructure performance modulation via inductive preheating10.1016/j.jmrt.2024.11.070 ↗
54. Microstructural evolution and wear properties of the continual local induction cladding NiCrBSi coatings10.1016/j.jmatprotec.2018.05.034 ↗
55. Understanding and control of Zener pinning via phase field and ensemble learning10.1016/j.commatsci.2023.112384 ↗
56. A comparative study of high-temperature erosion wear of plasma-sprayed NiCrBSiFe and WC–NiCrBSiFe coatings under simulated coal-fired boiler conditions10.1016/S0301-679X(00)00146-8 ↗
57. Development of CoCr0.65FeNi-BSiC as a self-fluxing high-entropy alloy for thermal spraying10.1016/j.surfcoat.2023.130259 ↗
58. High temperature wear behavior of the surface-modified externally cooled rolls10.1016/j.surfcoat.2018.04.071 ↗
59. Phase transformation-induced improvement in hardness and high-temperature Wear resistance of plasma-sprayed and Remelted NiCrBSi/WC coatings10.3390/met10121688 ↗
60. Effect of heat treatment on structure and property evolutions of atmospheric plasma sprayed NiCrBSi coatings10.1016/j.surfcoat.2017.07.011 ↗
61. Wear behaviour of steel coatings produced by friction surfacing10.1016/j.jmatprotec.2014.06.003 ↗
62. Properties and high-temperature wear behavior of remelted NiCrBSi coatings10.1007/s11837-019-03950-6 ↗
63. Hutchings · 2001
64. The delamination theory of wear10.1016/0043-1648(73)90125-7 ↗
65. Modification of flame-sprayed NiCrBSi alloy wear-resistant coating by friction stir processing and furnace re-melting treatments10.1016/j.surfcoat.2023.129236 ↗
66. Wear: a serious problem in industry
67. Enhancing the wear and high-temperature oxidation behavior of NiCrBSi coatings by collaboratively adding WC and Cr3C210.1016/j.surfcoat.2023.129968 ↗
68. Abrasive wear of metals10.1016/S0301-679X(96)00063-1 ↗
69. Wear and friction behavior of NiCrBSi coatings at elevated temperatures10.1007/s11666-019-00876-y ↗
70. Wear and frictional behaviour of partially oxidized and plasma sprayed NiCr and NiCrBSiFe coatings10.1038/s41598-025-99567-8 ↗
71. Dorner-Reisel · 2017 · 64 · 18
72. Effects of high temperature treatment on microstructure and mechanical properties of laser-clad NiCrBSi/WC coatings on titanium alloy substrate10.1016/j.matchar.2014.10.003 ↗
73. Wear and corrosion performance of Stellite 6® coatings applied by HVOF spraying and GTAW hotwire cladding10.1016/j.jmatprotec.2020.116734 ↗
74. Simultaneously enhancing wear and corrosion resistance of HVAF-sprayed Fe-based amorphous coating from Mo clad feedstock10.1016/j.jmatprotec.2021.117465 ↗
75. Dependency of solid particle erosion behaviour of plasma sprayed NiTi coating on primary gas flow rate10.1016/j.apsadv.2024.100681 ↗
76. A review of functionalizing plasma electrolytic oxidation (PEO) coatings on titanium substrates with laser surface treatments10.1016/j.apsadv.2023.100506 ↗
77. Development of electrodeposited multilayer coatings: a review of fabrication, microstructure, properties and applications10.1016/j.apsadv.2021.100141 ↗
78. Comprehensive analysis of boron-induced modification in LiNi0.8Mn0.1Co0.1O2 positive electrode material for lithium-ion batteries10.1016/j.jpowsour.2023.233571 ↗
79. Interlayer formation of diamond-like carbon coatings on industrial polyethylene: thickness dependent surface characterization by SEM, AFM and NEXAFS10.1016/j.apsusc.2013.01.210 ↗
80. Microstructural and tribological properties of induction cladded NiCrBSi /WC composite coatings10.1016/j.surfcoat.2020.125974 ↗
81. Review of plasma electrolytic oxidation of titanium substrates: mechanism, properties, applications and limitations10.1016/j.apsadv.2021.100121 ↗
82. Interface effects during consolidation in titanium alloy components locally reinforced with matrix-coated fibre composite10.1016/S1359-6454(02)00307-5 ↗
83. Effect of laser remelting treatment on the tribological properties of plasma sprayed WC–Cr3C2–Ni reinforced NiCrBSi coatings10.1016/j.surfcoat.2024.131359 ↗
84. Effect of plasma spraying parameter on wear resistance of NiCrBSiCFe plasma coatings on austenitic stainless steel at elevated temperatures at various loads10.1016/j.matdes.2011.10.051 ↗
85. Effect of induction remelting on microstructure and wear resistance of plasma sprayed NiCrBSiNb coatings10.1016/j.surfcoat.2019.02.083 ↗
86. High temperature phase stability and wear behavior of laser clad Ta reinforced NiCrBSi coating10.1016/j.apsusc.2021.149171 ↗