Discharge-mode effects on TiBx coatings: Benchmarking dcMS/mfMS/HiPIMS against arc mixed-mode HiPIMS
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. TiB2 and ZrB2 diffusion barriers in GaAs ohmic contact technology10.1116/1.572902 ↗
2. Titanium diboride
3. Influence of discharge characteristics on composition, stress, and properties of TiBx coatings by industrial HiPIMS at constant average power
4. Comparative investigation and characterization of the nano-mechanical and tribological behavior of RF magnetron sputtered TiN, CrN, and TiB2 coating on Ti6Al4V alloy10.1016/j.triboint.2024.109348 ↗
5. Pulsed-dc bias magnetron sputtered TiB2 ceramic coating10.1016/j.ijrmhm.2024.106624 ↗
6. DC arc plasma generation and thin film deposition from an industrial scale TiB2 cathode10.1016/j.surfcoat.2025.132804 ↗
7. Microstructure-driven strengthening of TiB2 coatings deposited by pulsed magnetron sputtering10.1016/j.surfcoat.2019.04.042 ↗
8. Tuning microstructure and mechanical properties in superstoichiometric to substoichiometric TiB2 thin films: a DCMS and HiPIMS study10.1016/j.surfcoat.2025.132811 ↗
9. Revisiting the origins of super-hardness in TiB2+z thin films–impact of growth conditions and anisotropy10.1016/j.surfcoat.2022.128806 ↗
10. X-ray photoelectron spectroscopy analysis of TiBx (1.3≤ x≤ 3.0) thin films10.1116/6.0000789 ↗
11. Effect of deposition mode and pulse parameters on the mechanical and tribological properties of magnetron sputtered TiBx films10.1016/j.tsf.2025.140640 ↗
12. Microstructure and materials properties of understoichiometric TiBx thin films grown by HiPIMS10.1016/j.surfcoat.2020.126537 ↗
13. Controlling the B/Ti ratio of TiBx thin films grown by high-power impulse magnetron sputtering10.1116/1.5026445 ↗
14. High-power impulse magnetron sputter deposition of TiBx thin films: effects of pulse length and peak current density10.1016/j.vacuum.2024.113070 ↗
15. Non-reactive HiPIMS deposition of NbCx thin films: effect of the target power density on structure-mechanical properties10.1016/j.surfcoat.2022.128674 ↗
16. A review comparing cathodic arcs and high power impulse magnetron sputtering (HiPIMS)10.1016/j.surfcoat.2014.08.043 ↗
17. HiPIMS co-sputtering for the increase of the mechanical properties of arc deposited TiN coatings10.1016/j.jmrt.2023.08.070 ↗
18. Enhancing Copper–Polyimide Adhesion via Tuned HiPIMS Power and Post-Thermal Treatment for Flexible Electronics10.1149/2162-8777/ade827 ↗
19. Tutorial: reactive high power impulse magnetron sputtering (R-HiPIMS)10.1063/1.4978350 ↗
20. External magnetic field increases both plasma generation and deposition rate in HiPIMS10.1016/j.surfcoat.2018.02.076 ↗
21. Deposition rates of high power impulse magnetron sputtering: physics and economics10.1116/1.3299267 ↗
22. Duty cycle control in reactive high-power impulse magnetron sputtering of hafnium and niobium10.1088/0022-3727/49/24/245201 ↗
23. The role of pulse length in target poisoning during reactive HiPIMS: application to amorphous HfO210.1088/0963-0252/24/3/035015 ↗
24. Optimizing HiPIMS pressure for deposition of high-k (k= 18.3) amorphous HfO210.1016/j.apsusc.2016.01.017 ↗
25. Controlled glow to arc transition in sputtering for high rate deposition of carbon films10.1016/j.diamond.2010.11.007 ↗
26. Synthesis of highly tetrahedral amorphous carbon by mixed-mode HiPIMS sputtering10.1088/0022-3727/48/44/442001 ↗
27. Mixed-mode high-power impulse magnetron sputter deposition of tetrahedral amorphous carbon with pulse-length control of ionization10.1063/1.4946841 ↗
28. Carbon films deposited by mixed-mode high power impulse magnetron sputtering for high wear resistance: the role of argon incorporation10.1016/j.tsf.2019.06.003 ↗
29. Noble gas control of diamond-like content and compressive stress in carbon films by arc-mixed mode high power impulse magnetron sputtering10.1016/j.surfcoat.2021.127785 ↗
30. Hybrid HiPIMS+ controlled pulsed arc for deposition of hard coatings10.1016/j.surfcoat.2022.128765 ↗
31. Stable DC vacuum arc plasma generation from a 100 mm TiB2 cathode10.1016/j.surfcoat.2024.130824 ↗
32. Plasma diagnostic and mechanical properties of tetrahedral amorphous carbon (ta-C) thin films deposited by varying pulse power and mixed discharge parameters using high-power impulse magnetron sputtering10.1016/j.diamond.2025.113105 ↗
33. Ionization of sputtered metals in high power pulsed magnetron sputtering10.1116/1.1818135 ↗
34. Discharge physics of high power impulse magnetron sputtering10.1016/j.surfcoat.2011.03.081 ↗
35. Ionized physical vapor deposition (IPVD): a review of technology and applications10.1016/j.tsf.2006.03.033 ↗
36. Mechanical properties of amorphous and crystalline CrN/CrAlSiN multilayer coating fabricated using HPPMS
37. The high power impulse magnetron sputtering discharge as an ionized physical vapor deposition tool10.1016/j.vacuum.2009.12.022 ↗
38. Effect of peak power in reactive high power impulse magnetron sputtering of titanium dioxide10.1016/j.surfcoat.2011.04.071 ↗
39. Cross-field ion transport during high power impulse magnetron sputtering
40. Energetic ions for the growth of amorphous and crystalline tungsten-nitrogen layers by HiPIMS10.1016/j.surfcoat.2025.132544 ↗
41. Pulse management in high power pulsed magnetron sputtering of niobium10.1016/j.surfcoat.2012.04.019 ↗
42. On the film density using high power impulse magnetron sputtering10.1016/j.surfcoat.2010.07.041 ↗
43. Effect of bias voltages and interlayer design on microstructure, mechanical properties, and adhesion performance of AlCrSiN coatings deposited using HiPIMS10.1016/j.surfcoat.2024.130618 ↗
44. CrN thin films deposited by HiPIMS in DOMS mode10.1016/j.surfcoat.2016.02.064 ↗
45. Mechanical properties of superhard TiB2 coatings prepared by DC magnetron sputtering10.1016/j.vacuum.2007.07.036 ↗
46. On the effect of substrate oscillation on CrN coatings deposited by HiPIMS and dcMS10.1016/j.surfcoat.2018.02.028 ↗
47. Excess of boron in TiB2 superhard thin films: a combined experimental and ab initio study10.1088/0022-3727/44/38/385402 ↗
48. Influence of pulse frequency and bias on microstructure and mechanical properties of TiB2 coatings deposited by high power impulse magnetron sputtering10.1016/j.surfcoat.2016.06.086 ↗
49. Residual stress effect on hardness and yield strength of Ni thin film10.1016/j.surfcoat.2012.07.002 ↗
50. Deformation and failure mechanism of nano-composite coatings under nano-indentation10.1016/j.surfcoat.2005.10.010 ↗
51. Analysis of multiple fatigue cracks—part I: theory10.1115/1.2920905 ↗
52. Analysis of multiple fatigue cracks—part II: results10.1115/1.2920906 ↗
53. Adhesive properties of deposited cu films on colorless polyimide using high power impulse magnetron sputtering system10.1016/j.surfcoat.2024.130710 ↗
54. Thin film deposition using energetic ions10.3390/ma3084109 ↗
55. Interface microstructure engineering by high power impulse magnetron sputtering for the enhancement of adhesion10.1063/1.2697052 ↗
56. Fabrication and tribological properties of WC-TiB2 composite cutting tool materials under dry sliding condition10.1016/j.triboint.2016.12.029 ↗