journal article·2026-05Open access

On the unique effect of hexamethyldisiloxane on thick a-C:H films deposited at elevated temperatures

Manuel C.J. Schachinger, Francisco A. Delfin, Christian Zürn, Bernhard Fickl, Frans Munnik, Bernd Rübig, Christian Dipolt, Thomas Müller, Christian Forsich, Bernhard C. Bayer, Daniel Heim

Abstract

Doping of hard amorphous carbon films with silicon typically leads to lower internal stresses and a moderate reduction in hardness and Young's modulus, allowing for the growth of thicker coatings without the risk of spalling. Even though the effect of silicon doping on harder DLC films is known, its role in softer films grown at higher deposition temperatures remains unclear. This work now aims to elucidate the effects of silicon incorporation into soft and thick (>27 μm) a-C:H coatings grown at elevated temperatures using a pulsed direct current plasma assisted chemical vapor deposition (DC PACVD) system. The a-C:H:Si:O films were deposited using C 2 H 2 at 450 °C and 550 °C with an additional hexamethyldisiloxane (HMDSO) flow of 0–25 sccm. Remarkably, the effect of silicon modification on the films was significantly different from other reports in literature. Instead of reducing the residual stresses, an increase in HMDSO flow led to a marked jump in stress, accompanied by an increase in density and load-bearing capacity. In addition, Young's modulus and hardness increased by more than three times compared to the undoped films. The relationship between hardness and silicon concentration followed a linear trend. A deviation from this linear relationship was observed at the highest HMDSO flow. Elastic recoil detection analysis (ERDA) revealed that this was likely related to a saturation of the positive effects of Si combined with the incorporation of hydrogen and oxygen into the coating's structure.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Copper Interconnects and Reliability · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Influence of tribology on global energy consumption, costs and emissions10.1007/s40544-017-0183-5 ↗
2. Diamond-like carbon coatings
3. Properties and classification of diamond-like carbon films10.3390/ma14020315 ↗
4. Achieving superlubricity with 2D transition metal carbides (MXenes) and MXene/graphene coatings
5. Superlubricity of materials: progress, potential, and challenges10.3390/ma16145145 ↗
6. An overview of superlubricity in diamond-like carbon films
7. Effects of element doping on the structure and properties of diamond-like carbon films: a review10.3390/lubricants11040186 ↗
8. 60years of DLC coatings: historical highlights and technical review of cathodic arc processes to synthesize various DLC types, and their evolution for industrial applications10.1016/j.surfcoat.2014.08.017 ↗
9. History of diamond-like carbon films - from first experiments to worldwide applications10.1016/j.surfcoat.2014.01.031 ↗
10. Production process for heat exchanger tubes with diamond-like carbon-type inner coating10.1080/01457632.2025.2502218 ↗
11. Diamond-like amorphous carbon10.1016/S0927-796X(02)00005-0 ↗
12. Stress reduction behavior in metal-incorporated amorphous carbon films: first-principles approach10.1088/1742-6596/29/1/029 ↗
13. Amorphous hydrogenated carbon films for tribological applications I. Development of moisture insensitive films having reduced compressive stress10.1016/0301-679X(96)00017-5 ↗
14. Internal stress reduction by incorporation of silicon in diamond-like carbon films10.1016/S0257-8972(02)00572-8 ↗
15. Deposition of Si-DLC films with high hardness, low stress and high deposition rates10.1016/S0257-8972(00)00932-4 ↗
16. Effects of Si content in DLC films on their friction and wear properties10.1016/j.surfcoat.2004.08.075 ↗
17. Diamond-like nanocomposites (DLN)10.1016/0040-6090(92)90532-G ↗
18. Structure, properties and applications of diamond like nanocomposite (SiOx containing DLC) films: a review
19. Potential of thick a-C: H: Si films as substitute for chromium plating10.1016/j.surfcoat.2013.11.011 ↗
20. Effect of deposition temperature and hydrogen as a process gas on mechanical properties and specific electrical resistivity of thick a-C:H obtained by means of PACVD10.1016/j.surfcoat.2023.130096 ↗
21. Non-destructive characterisation of carbon films
22. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
23. Determination of elastic modulus and Poisson’s ratio of diamond-like carbon films10.1016/S0040-6090(98)01512-0 ↗
24. Celebrating the 100th anniversary of the Stoney equation for film stress: developments from polycrystalline steel strips to single crystal silicon wafers10.1016/j.tsf.2008.07.014 ↗
25. Effect of nitriding on low-cycle fatigue properties10.1016/S0142-1123(96)00031-X ↗
26. Simulated annealing analysis of Rutherford backscattering data10.1063/1.119524 ↗
27. Systematic and collaborative approach to problem solving using X-ray photoelectron spectroscopy10.1016/j.apsadv.2021.100112 ↗
28. Tribology of DLC films under slip-rolling conditions
29. Structural evolution and tribological behavior of nitrogen-doped DLC coatings deposited by pulsed DC PACVD method10.1016/j.diamond.2018.11.004 ↗
30. Carbon based DLC films: influence of the processing parameters on the structure and properties10.1590/s1517-707620180002.0395 ↗
31. In-situ thermal stability analysis of amorphous Si-doped carbon films10.1016/j.carbon.2021.08.075 ↗
32. Mechanical and tribological properties of Si and W doped diamond like carbon (DLC) under dry reciprocating sliding conditions
33. Improving the mechanical property of amorphous carbon films by silicon doping10.1016/j.diamond.2018.01.013 ↗
34. The effects of Si incorporation on the microstructure and nanomechanical properties of DLC thin films10.1088/0953-8984/12/44/302 ↗
35. Structural and mechanism study on enhanced thermal stability of hydrogenated diamond-like carbon films doped with Si/O10.1016/j.diamond.2020.107923 ↗
36. Effects of silicon doping on low-friction and high-hardness diamond-like carbon coating via filtered cathodic vacuum arc deposition10.1038/s41598-021-83158-4 ↗
37. Thermal stability of Si/SiC/ta-C composite coatings and improvement of tribological properties through high-temperature annealing10.1038/s41598-022-07514-8 ↗
38. Structural dependence of mechanical properties of Si incorporated diamond-like carbon films deposited by RF plasma-assisted chemical vapour deposition10.1016/S0040-6090(97)00411-2 ↗
39. Structural analysis of Si-containing diamond-like carbon10.1016/j.diamond.2005.12.020 ↗
40. Effect of silicon and oxygen co-doping on structure and properties of non-hydrogenated amorphous carbon10.1016/j.surfcoat.2024.131616 ↗
41. Tailoring the structure and property of silicon-doped diamond-like carbon films by controlling the silicon content10.1016/j.surfcoat.2013.07.061 ↗
42. Elements-added diamond-like carbon film for biomedical applications10.1155/2019/6812092 ↗
43. Mechanical properties of silicon-doped diamond-like carbon films prepared by pulse-plasma chemical vapor deposition10.1016/j.surfcoat.2011.03.106 ↗
44. Properties of amorphous carbon–silicon alloys deposited by a high plasma density source10.1063/1.1406966 ↗
45. Residual stresses in DLC films and adhesion to various substrates
46. Impact of relative humidity and deposition parameters on the tribological behavior of soft DLC coatings10.1016/j.surfcoat.2023.130100 ↗
47. The effect of silicon doping and thermal annealing on the electrical and structural properties of hydrogenated amorphous carbon thin films10.1016/j.diamond.2003.11.032 ↗
48. A concise review of the Raman spectra of carbon allotropes10.1016/j.diamond.2022.109180 ↗
49. Raman spectroscopy analysis of disordered and amorphous carbon materials: a review of empirical correlations10.1016/j.carbon.2025.120214 ↗
50. Interpretation of Raman spectra of disordered and amorphous carbon10.1103/PhysRevB.61.14095 ↗
51. Raman spectroscopy of hydrogenated amorphous carbons10.1103/PhysRevB.72.085401 ↗
52. Raman spectroscopy of amorphous, nanostructured, diamond–like carbon, and nanodiamond10.1098/rsta.2004.1452 ↗
53. Diamond like carbon films containing Si: structure and nonlinear optical properties10.3390/ma13041003 ↗
54. Influence of the process parameters on the characteristics of silicon-incorporated a-C:H:SiOx coatings10.1016/j.surfcoat.2014.12.073 ↗
55. Structure, mechanical and Tribological properties of me-doped diamond-like carbon (DLC) (me = Al, Ti, or Nb) hydrogenated amorphous carbon coatings10.3390/coatings8100370 ↗
56. Practical guides for X-ray photoelectron spectroscopy (XPS): interpreting the carbon 1s spectrum10.1116/6.0000682 ↗
57. A study of HMDSO/O2 plasma deposits using a high-sensitivity and -energy resolution XPS instrument: curve fitting of the Si 2p core level10.1016/S0169-4332(98)00479-6 ↗
58. Polymerization mechanisms of hexamethyldisiloxane in low-pressure plasmas involving complex geometries10.1016/j.apsusc.2023.158824 ↗
59. XPS analysis of SiC films prepared by radio frequency plasma sputtering10.1016/j.phpro.2012.03.524 ↗
60. Characterisation of a-C:H and oxygen-containing Si:C:H films by Raman spectroscopy and XPS10.1016/j.diamond.2005.01.020 ↗
61. Highly conductive and thick a-C:H:N films deposited at elevated temperatures via direct current PACVD10.1016/j.surfcoat.2025.132669 ↗
62. Gobbi · 2013 · 699
63. Structure and property of diamond-like carbon coating with Si and O co-doping deposited by reactive magnetron sputtering10.3390/jcs7050180 ↗
64. Oxygen doping effect on wettability of diamond-like carbon films10.1088/2053-1591/abeac9 ↗
65. Electrical conduction properties of hydrogenated amorphous carbon films with different structures10.3390/ma14092355 ↗
66. Thermal stability of hexamethyldisiloxane (MM) for high-temperature organic Rankine cycle (ORC)10.3390/en9030183 ↗