Cu–EDTA-assisted electrodeposition of Cu/polyaniline composite electrodes for non-enzymatic electrochemical glucose sensing
Source abstract
Abstract
Non-enzymatic electrochemical glucose sensors based on non-noble-metal catalysts are attracting increasing attention as a stable and low-cost alternative to enzyme-based systems. In this study, a Cu/polyaniline composite electrode was prepared by modifying copper nanoparticles (Cu NPs) on polyaniline (PANI) in order to achieve controllable metal nucleation and improved catalytic activity. To obtain uniformly dispersed Cu species, ethylenediaminetetraacetic acid (EDTA) was used to form a Cu–EDTA complex as the metal precursor for electrodeposition on the conductive PANI film. The coordination behavior of the Cu–EDTA complex and its pH-dependent reduction characteristics were systematically investigated to clarify its applicability for controlled Cu deposition. Structural and elemental analyses showed that adjusting the Cu2+/EDTA4− molar ratio enables uniform loading of Cu NPs on the PANI matrix, and that under weakly acidic conditions a ratio of 1:1 yields the most homogeneous Cu distribution. Electrochemical evaluation demonstrated that the resulting Cu/PANI electrode exhibits an enhanced catalytic response toward glucose oxidation, consistent with the increased electrocatalytic activity of the Cu species. These results confirm the effectiveness of Cu–EDTA complexes in controlling the deposition of non-precious Cu on conductive polymers and provide a practical strategy for low-cost, high-performance electrodes designed for non-enzymatic glucose sensing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrochemical sensors and biosensors · Conducting polymers and applications · Supercapacitor Materials and Fabrication
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Electrochemical sensors: a powerful tool in analytical chemistry10.1590/S0103-50532003000200003 ↗
2. Electrochemical sensors for clinical analysis10.3390/s8042043 ↗
3. Electrochemical sensors10.1021/ac8007219 ↗
4. Electrochemical sensors10.1021/ac0202278 ↗
5. Challenges and strategies in developing an enzymatic wearable sweat glucose biosensor as a practical point-of-care monitoring tool for type II diabetes10.3390/nano12020221 ↗
6. Electrochemical non-enzymatic glucose sensors: recent progress and perspectives10.1039/D0CC05650B ↗
7. Nonenzymatic electrochemical glucose sensor based on nanoporous PtPb networks10.1021/ac701790z ↗
8. Chitosan cryogel with embedded gold nanoparticles decorated multiwalled carbon nanotubes modified electrode for highly sensitive flow-based non-enzymatic glucose sensor10.1016/j.snb.2017.02.105 ↗
9. A robust enzymeless glucose sensor based on CuO nanoseed modified electrodes10.1039/C5DT01664A ↗
10. Facile synthesis of NiCo₂O₄@polyaniline core–shell nanocomposite for sensitive determination of glucose
11. Pd nanocube as non-enzymatic glucose sensor10.1016/j.snb.2014.11.091 ↗
12. Study of the nonenzymatic glucose sensor based on highly dispersed Pt nanoparticles supported on carbon nanotubes10.1016/j.talanta.2006.12.037 ↗
13. Noble metal construction for electrochemical nonenzymatic glucose detection10.1002/admt.202200272 ↗
14. Advanced strategies for improving the analytical performance of Pt-based nonenzymatic electrochemical glucose sensors: a minireview10.1039/C5AY03181H ↗
15. Efficient strategies for the preparation of non-noble metal catalysts for electrocatalytic glycerol oxidation towards high-value-added chemicals10.1039/D5RA02222C ↗
16. Cobalt oxide acicular nanorods with high sensitivity for the non-enzymatic detection of glucose10.1016/j.bios.2011.06.033 ↗
17. A highly sensitive non-enzymatic glucose sensor based on nickel and multi-walled carbon nanotubes nanohybrid films fabricated by one-step co-electrodeposition in ionic liquids10.1016/j.electacta.2012.01.007 ↗
18. A novel non-enzymatic glucose sensor based on Cu nanoparticle modified graphene sheets electrode10.1016/j.aca.2011.10.025 ↗
19. Seed-mediated growth method for epitaxial array of CuO nanowires on surface of Cu nanostructures and its application as a glucose sensor10.1021/jp800694x ↗
20. CoOOH nanosheets on cobalt substrate as a non-enzymatic glucose sensor10.1016/j.elecom.2012.04.012 ↗
21. Synthesis of unique three-dimensional CoMn₂O₄@Ni(OH)₂ nanocages via Kirkendall effect for non-enzymatic glucose sensing10.1016/j.jcis.2023.09.098 ↗
22. Synthesis of core–shell structured Cu₂O@Co(OH)₂ anchored on three-dimensional macroporous carbon for efficient non-enzymatic glucose detection10.1016/j.microc.2024.112319 ↗
23. Three-dimensional Cu foam-supported single crystalline mesoporous Cu₂O nanothorn arrays for ultra-highly sensitive and efficient nonenzymatic detection of glucose10.1021/acsami.5b05738 ↗
24. Electrochemical non-enzymatic glucose sensors: a perspective and an evaluation10.1016/S1452-3981(23)15359-4 ↗
25. Recent advances in non-enzymatic electrochemical glucose sensors based on non-precious transition metal materials: opportunities and challenges10.1039/C6RA12506A ↗
26. Measuring aging stability of perovskite solar cells10.1016/j.joule.2018.05.005 ↗
27. Relation between crystallite size and dispersion on supported metal catalysts10.1021/la962103u ↗
28. Recent developments in the synthesis of supported catalysts10.1021/cr500486u ↗
29. Palladium-silver polyaniline composite as an efficient catalyst for ethanol oxidation10.1016/j.apcata.2018.01.018 ↗
30. Roles of TiO2 in the highly robust Au nanoparticles-TiO2 modified polyaniline electrode towards non-enzymatic sensing of glucose10.1016/j.talanta.2020.120780 ↗
31. Catalytic activity of atomic gold-decorated polyaniline support in glucose oxidation10.3390/electrochem1040026 ↗
32. Electrochemically controlled atom-by-atom deposition of gold to polyaniline10.1149/1.3474932 ↗
33. One-step approach for synthesis of nanosized Cu-doped zeolite A crystals using the Cu–EDTA complex10.1016/j.micromeso.2014.07.033 ↗
34. Two-dimensional layer architecture assembled by Keggin polyoxotungstate, Cu–EDTA–complex and sodium linker: synthesis, crystal structures, and magnetic properties10.1016/j.jssc.2007.03.011 ↗
35. Synthesis and characterization of EDTA complexes useful for trace elements supplementation10.1590/S0103-50532002000500006 ↗
36. Spectrophotometric studies on protonated, ammino and hydroxo complexes of copper (II), nickel (II) and cobalt (II) versenates10.1016/0022-1902(63)80136-0 ↗
37. Indirect determination of pH in electroless copper plating bath by spectrophotometry
38. Influences of pH and EDTA additive on the structure of Ni films electrodeposited by using bubble templates as electrocatalysts for hydrogen evolution reaction10.3390/membranes11030165 ↗
39. Determination of conditional stability constants for some divalent transition metal ion–EDTA complexes by electrospray ionization mass spectrometry10.1002/jms.3372 ↗
40. Impact of acidity profile on nascent polyaniline in the modified rapid mixing process — material electrical conductivity and morphological study10.3390/ma13225108 ↗
41. Copper nanoparticles/polyaniline/graphene composite as a highly sensitive electrochemical glucose sensor10.1016/j.jelechem.2016.08.004 ↗
42. Cu nanoparticles supported mesoporous polyaniline and its applications toward non-enzymatic sensing of glucose and electrocatalytic oxidation of methanol10.1007/s10965-013-0083-y ↗
43. Copper nanoparticles/polyaniline/molybdenum disulfide composite for non-enzymatic electrochemical glucose sensing10.1016/j.heliyon.2023.e21272 ↗