Synergistic effects of Ta and Si alloying on the long-term oxidation resistance of Ti1-xAlxN coatings
Source abstract
Abstract
Ti-Al-N coatings are emerging as robust stand-alone protective solutions in turbine applications. To maximize their potential in high-temperature environments, improving their long-term oxidation stability is key. In this work, we investigate the combined effect of Ta and Si alloying on the oxidation of thick (8 to 15 μm) cathodic arc evaporated Ti 1-x-y-z Al x Ta y Si z N coatings at 850 °C up to 500 h. Combined Ta and Si alloying yields extremely low oxidation kinetics following a logarithmic rate law, demonstrating exceptional long-term stability. After 500 h, the oxide scale thickness decreases from ~1.1 μm for the low-Al Ti 0.49 Al 0.36 Ta 0.13 Si 0.02 N coating to <600 nm for the high-Al Ti 0.40 Al 0.45 Ta 0.13 Si 0.02 N variant. Correspondingly, the logarithmic rate constants lie between 0.379 ± 0.019 μm × h −1 (Ti 0.49 Al 0.36 Ta 0.13 Si 0.02 N) and 0.243 ± 0.020 μm × h −1 (Ti 0.40 Al 0.45 Ta 0.13 Si 0.02 N), indicating a combined impact of Ta and Si in relation to the Al content on the oxidation kinetics. Detailed cross-sectional TEM analyses reveal a multilayered oxide scale consisting of two inner Ti-Ta-Si-containing sublayers and an outer Al 2 O 3 layer. The findings demonstrate that Ti 1-x-y-z Al x Ta y Si z N coatings significantly outperform conventional Ti-Al-N in the long-term oxidation regime, where the combined effects of Ta and Si emerge as the decisive factor for retarded oxygen inward diffusion. • Cathodic arc evaporation of mixed Ta and Si alloyed Ti 1-x Al x N-based thin films. • Ti 1-x-y-z Al x Ta y Si z N exhibits exceptional oxidation resistance up to 500 h at 850 °C. • Ti 0.40 Al 0.45 Ta 0.13 Si 0.02 N low (highest Al) exhibits the slowest oxidation kinetics.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. Commission welcomes ICAO agreement on new aircraft standards for fuel efficiency and noise levels driving sustainability in aviation, Mobility and Transport (n.d.). https://transport.ec.europa.eu/news-events/news/commission-welcomes-icao-agreement-new-aircraft-standards-fuel-efficiency-and-noise-levels-driving-2025-03-03_en (accessed October 3, 2025).
2. Hard coatings for cutting applications: physical vs. chemical vapor deposition and future challenges for the coatings community10.1016/j.surfcoat.2021.127949 ↗
3. Materials science-based guidelines to develop robust hard thin film materials10.1016/j.pmatsci.2024.101323 ↗
4. Industrial deposition of binary, ternary, and quaternary nitrides of titanium, zirconium, and aluminum10.1116/1.574948 ↗
5. Oxidation of metastable single-phase polycrystalline Ti0.5Al0.5N films: kinetics and mechanisms10.1063/1.345664 ↗
6. On structure and properties of sputtered Ti and Al based hard compound films10.1116/1.573708 ↗
7. Titanium aluminum nitride films: a new alternative to TiN coatings10.1116/1.573713 ↗
8. Effects of second metal contents on microstructure and micro-hardness of ternary nitride films synthesized by cathodic arc method10.1016/j.surfcoat.2004.08.033 ↗
9. Mechanical properties and machining performance of Ti1−Al N-coated cutting tools10.1016/j.surfcoat.2004.04.056 ↗
10. Prediction of phase change in pseudobinary transition metal aluminum nitrides by band parameters method10.1016/j.surfcoat.2004.07.035 ↗
11. Protective transition metal nitride coatings
12. Metastable coatings — prediction of composition and structure10.1016/0257-8972(88)90145-4 ↗
13. Influence of the Al distribution on the structure, elastic properties, and phase stability of supersaturated Ti1−xAlxN10.1063/1.2360778 ↗
14. Structure, mechanical and tribological properties of sputtered Ti1–xAlxN coatings with 0.5≤x≤0.7510.1016/j.surfcoat.2004.12.008 ↗
15. Phase transition and properties of Ti–Al–N thin films prepared by r.f.-plasma assisted magnetron sputtering10.1016/S0040-6090(98)01364-9 ↗
16. Three-dimensional atom probe investigations of Ti–Al–N thin films10.1016/j.scriptamat.2009.06.015 ↗
17. On the structure of (Ti, Al)N-PVD coatings10.1016/0022-4596(87)90071-5 ↗
18. X-ray photoelectron spectroscopy studies of Ti1-Al N (0 ≤ x ≤ 0.83) high-temperature oxidation: the crucial role of Al concentration10.1016/j.surfcoat.2019.06.081 ↗
19. A mechanistic approach of oxidation resistance, structural and mechanical behaviour of TiAlN coatings10.1016/j.apsusc.2022.152851 ↗
20. Thermal oxidation of Ti1 − xAlxN coatings in air10.1016/S0955-2219(97)00050-2 ↗
21. Thermal stability of arc evaporated high aluminum-content Ti1−xAlxN thin films10.1116/1.1503784 ↗
22. Thermal stability and oxidation resistance of Ti-Al-N coatings10.1016/j.surfcoat.2011.12.028 ↗
23. Impact of nitrogen vacancies on the high temperature behavior of (Ti1−xAlx)Ny alloys10.1016/j.actamat.2016.08.024 ↗
24. Unprecedented thermal stability of inherently metastable titanium aluminum nitride by point defect engineering10.1080/21663831.2016.1233914 ↗
25. Effects of nitrogen vacancies on phase stability and mechanical properties of arc deposited (Ti 0.52 Al 0.48 )N y (y < 1) coatings10.1016/j.surfcoat.2017.09.043 ↗
26. Increased thermal stability of Ti–Al–N thin films by ta alloying10.1016/j.surfcoat.2011.07.009 ↗
27. Advanced TiAlTaN hardcoatings for cutting tools
28. Experimental and computational studies on toughness enhancement in Ti-Al-ta-N quaternaries10.1116/1.4997431 ↗
29. Thermal stability and oxidation resistance of arc evaporated TiAlN, TaAlN, TiAlTaN, and TiAlN/TaAlN coatings10.1016/j.surfcoat.2014.10.024 ↗
30. High-temperature tribology and oxidation of Ti1−x−yAlxTayN hard coatings10.1016/j.surfcoat.2018.02.062 ↗
31. Improved mechanical properties, thermal stabilities, and oxidation resistance of arc evaporated Ti-Al-N coatings through alloying with ta10.1016/j.surfcoat.2018.03.014 ↗
32. Origin of high temperature oxidation resistance of Ti–Al–ta–N coatings10.1016/j.surfcoat.2014.02.067 ↗
33. Guidelines for increasing the oxidation resistance of Ti-Al-N based coatings10.1016/j.tsf.2019.05.009 ↗
34. Influence of temperature on oxidation mechanisms of fiber-textured AlTiTaN coatings10.1021/am405727p ↗
35. Deposition and characterization of TiAlSiN coatings prepared by hybrid PVD coating system: study on the properties of TiAlSiN films10.1002/sia.5680 ↗
36. Correlation between microstructure evolution and high temperature properties of TiAlSiN hard coatings with different Si and Al content10.1016/j.apsusc.2014.06.057 ↗
37. Relationship of microstructure, mechanical properties and titanium cutting performance of TiAlN/TiAlSiN composite coated tool10.1016/j.ceramint.2016.01.159 ↗
38. Thermal stability, mechanical properties, and tribological performance of TiAlXN coatings: understanding the effects of alloying additions10.1016/j.jmrt.2022.01.005 ↗
39. Effect of Si-addition on structure and thermal stability of Ti-Al-N coatings10.1016/j.jallcom.2022.165483 ↗
40. Improved oxidation resistance of TiAlN coatings by doping with Si or B10.1016/j.surfcoat.2009.03.036 ↗
41. Improved thermal stability and oxidation resistance of Al–Ti–N coating by Si addition10.1016/j.tsf.2014.01.072 ↗
42. Influence of Si and ta mixed doping on the structure, mechanical and thermal properties of Ti Al N coatings10.1016/j.surfcoat.2023.129428 ↗
43. Influence of Si content on tribological properties of Ti-Al-ta-Si-N coatings10.1016/j.matlet.2025.138782 ↗
44. The effect of Si content on microstructure and mechanical properties of Ti–Al–ta–Si–N coatings10.1016/j.vacuum.2023.112422 ↗
45. Improvement of mechanical properties and adhesion of Ti-Al-Si-N coatings by alloying with ta10.3390/lubricants10080178 ↗
46. The effect of cathodic arc guiding magnetic field on the growth of (Ti0.36Al0.64)N coatings10.3390/coatings9100660 ↗
47. Ion beam tools for nondestructive in-situ and in-operando composition analysis and modification of materials at the tandem Laboratory in Uppsala10.1088/1748-0221/17/04/P04011 ↗
48. High-temperature oxidation resistance of ternary and quaternary Cr-(Mo)-Si-B2-z coatings — influence of Mo addition10.1016/j.surfcoat.2023.129733 ↗
49. Potku – new analysis software for heavy ion elastic recoil detection analysis10.1016/j.nimb.2014.02.016 ↗
50. Mayer
51. X-ray Photoelectron Spectroscopy (XPS) Reference Pages, (n.d.). http://www.xpsfitting.com/ (accessed February 9, 2026).
52. Defining the nature of adventitious carbon and improving its merit as a charge correction reference for XPS10.1016/j.apsusc.2024.159319 ↗
53. Nist X-ray photoelectron spectroscopy database, version 4.1
54. The HighScore suite10.1017/S0885715614000840 ↗
55. Measurement of thin film mechanical properties using nanoindentation10.1557/S0883769400041634 ↗
56. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
57. Critical review of analysis and interpretation of nanoindentation test data10.1016/j.surfcoat.2005.03.018 ↗
58. PDF-5+: a comprehensive powder diffraction file™ for materials characterization10.1017/S0885715624000150 ↗
59. Structural effects of energy input during growth of Ti1−xAlxN (0.55≤x≤0.66) coatings by cathodic arc evaporation10.1016/j.surfcoat.2013.12.018 ↗
60. Self-organized nanostructures in the Ti–Al–N system10.1063/1.1608464 ↗
61. Effect of microstructure and phase constitution on mechanical properties of Ti1−xAlxN coatings10.1016/j.apsusc.2014.06.112 ↗
62. Structural properties and nanoindentation of AlN films by a filtered cathodic vacuum arc at low temperature10.1088/0022-3727/37/10/009 ↗
63. High-temperature hot corrosion kinetics of PVD Ti1-xAlxN coatings on Nimonic c-26310.1016/j.corsci.2024.112248 ↗
64. Surface recrystallization and its effect on oxidation of superalloy C26310.1016/j.corsci.2017.09.020 ↗
65. S. Bose, High Temperature Coatings, Butterworth-Heinemann, Oxford, England, 2007. http://www.sciencedirect.com:5070/book/9780750682527/high-temperature-coatings (accessed June 27, 2025).
66. Spinodal decomposition of cubic Ti1−x Al x N: comparison between experiments and modeling10.3139/146.101570 ↗
67. Decomposition pathways in age hardening of Ti-Al-N films10.1063/1.3610451 ↗
68. Microstructure, mechanical and thermal properties of TiAlTaN/TiAlSiN multilayer10.1016/j.vacuum.2021.110138 ↗
69. On the effect of ta on improved oxidation resistance of Ti–Al–ta–N coatings10.1116/1.3119671 ↗
70. Arc evaporation of ti–Al–ta–N coatings: the effect of bias voltage and ta on high-temperature tribological properties10.1007/s11249-008-9313-6 ↗
71. Oxidation of a ternary Ti3Al-ta alloy10.1515/HTMP.2002.21.4.195 ↗
72. High temperature oxidation behavior of Ti0.5Al0.5N coating and Ti0.5Al0.4Si0.1N coating10.1016/j.vacuum.2012.04.013 ↗
73. Investigation of the role of silicon in TiAlSiN coating deposited on TiAl alloys during long-term oxidation10.1016/j.corsci.2022.110394 ↗
74. Improved Ti-Al-N coatings through ta alloying and multilayer architecture10.1016/j.surfcoat.2017.09.016 ↗