journal article·2026-05Open access

Generation, characterization and modelling of bio-inspired asymmetric topographic structures via ps-pulsed Direct Laser Interference Patterning on metallic surfaces

Silas Schütz, Sebastian Suarez, Daniel Wyn Müller, Frank Mücklich

Abstract

This study presents a comprehensive approach for generating bioinspired asymmetric surface structures on copper alloys and tin-coated substrates using picosecond-pulsed Direct Laser Interference Patterning (ps-DLIP). By introducing controlled tilt angles during processing, sawtooth-like morphologies were fabricated and quantitatively characterized through confocal laser scanning microscopy and focused ion beam cross-sections. Three key surface parameters, i.e., profile depth, skewness, and kurtosis, were evaluated to assess structural asymmetry and functional potential. Results indicate that structured tin-coated substrates exhibit predominantly negative skewness, suggesting favorable tribological characteristics, whereas structured copper alloys enable pronounced asymmetry for friction anisotropy. To elucidate the structure-formation mechanisms, finite element modelling based on the two-temperature model was carried out for tin under 12 ps pulses. Simulations confirm melting as the dominant interaction mechanism, with evaporation and redeposition effects becoming relevant after multiple pulses. Heat accumulation between pulses was found negligible for the used frequencies, allowing independent treatment of successive shots. These findings provide a foundation for predictive structuring strategies and serve as a stepping stone for future research directions, including multi-pulse simulations and modelling of intermetallic phases. • Sawtooth structures were created on Cu alloy and Sn by tilting samples during DLIP. • The Cu alloy enables friction anisotropy, required for electrical connectors. • The first TTM application for Sn under visible laser light is provided. • Melting was identified as the primary interaction mechanism. • Structural asymmetry is driven by angle-dependent local absorption.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Laser Material Processing Techniques · Laser and Thermal Forming Techniques · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Periodical micro-nano-structuring of metallic surfaces by interfering laser beams10.1016/S0169-4332(02)01381-8 ↗
2. Direct laser interference patterning, 20 years of development: from the basics to industrial applications
3. Lotus effect in wetting and self-cleaning10.1016/j.biotri.2015.08.002 ↗
4. Recent progress in exploring drag reduction mechanism of real sharkskin surface: a review10.1142/S0219519415300021 ↗
5. Laser interference metallurgy – using interference as a tool for micro/nano structuring
6. Dry friction between laser-patterned surfaces: role of alignment, structural wavelength and surface chemistry10.1007/s11249-012-0057-y ↗
7. Wear debris and electrical resistance in textured Sn-coated cu contacts subjected to fretting10.1016/j.wear.2015.10.010 ↗
8. Topographical and microstructural effects of laser surface texturing on tin-coated copper electrical connectors under load cycling10.1109/TCPMT.2017.2659224 ↗
9. Möglichkeiten der Eigenschaftsoptimierung von Zinnoberflächen für Steckkontakte
10. Zentralverband Elektrotechnik- und Elektronikindustrie - ZVEI eV · 2021
11. Nanoscale design of snake skin for reptation locomotions via friction anisotropy10.1016/S0021-9290(99)00013-5 ↗
12. Inversion of friction anisotropy in a bioinspired asymmetrically structured surface10.1098/rsif.2017.0629 ↗
13. Bioinspired 3D printed locomotion devices based on anisotropic friction
14. Fabrication of inclined non-symmetrical periodic micro-structures using direct laser interference patterning10.1038/s41598-019-41902-x ↗
15. One-step fabrication of asymmetric saw-tooth-like surface structures on stainless steel using direct laser interference patterning10.1016/j.matlet.2019.03.007 ↗
16. Applying ultrashort pulsed direct laser interference patterning for functional surfaces10.1038/s41598-020-60592-4 ↗
17. Metal ablation by picosecond laser pulses: a hybrid simulation10.1103/PhysRevB.66.115404 ↗
18. Experimental and theoretical determination of the effective penetration depth of ultrafast laser radiation in stainless steel10.1007/s40516-020-00129-9 ↗
19. Modeling of multi-burst mode pico-second laser ablation for improved material removal rate10.1007/s00339-009-5405-x ↗
20. The picosecond laser ablation mechanism of monocrystalline silicon by coupling two-temperature model (TTM)-molecular dynamic (MD)10.1016/j.apsusc.2024.160022 ↗
21. Fabrication of sub-micron surface structures on copper, stainless steel and titanium using picosecond laser interference patterning10.1016/j.apsusc.2016.06.100 ↗
22. Aging studies of cu-Sn intermetallic compounds in annealed surface mount solder joints
23. Advanced design of periodical architectures in bulk metals by means of laser interference metallurgy10.1016/j.apsusc.2007.08.010 ↗
24. Large area direct fabrication of periodic arrays using interference patterning10.1016/j.phpro.2011.03.125 ↗
25. Development and validation of a calculation routine for the precise determination of pulse overlap and accumulated Fluence in pulsed laser surface treatment10.1002/adem.202201021 ↗
26. Generation of asymmetric topographic structures in Cu-Sn connectors using extended direct laser interference patterning for the tailoring of insertion and removal forces
27. Tribo-electric analysis of multi-cycle Wear in asymmetric laser-structured cu-Sn connectors10.1007/s11249-023-01799-0 ↗
28. Deformation behavior of asymmetric direct laser interference patterning structures on hot-dip tinned copper10.3390/ma18235278 ↗
29. Correlating and evaluating the functionality-related properties with surface texture parameters and specific characteristics of machined components10.1016/j.ijmecsci.2018.09.044 ↗
30. Leach
31. Electron emission from metal surfaces exposed to ultrashort laser pulses
32. A critical assessment regarding two-temperature models: an investigation of the different forms of two-temperature models, the various ultrashort pulsed laser models and computational methods10.1007/s11831-023-09974-1 ↗
33. Modelling ultrafast laser ablation10.1088/1361-6463/50/19/193001 ↗
34. Optical properties of beta-Sn films10.1063/1.3106528 ↗
35. Mory · 1977
36. Two-temperature mircrocale heat transfer model. Part II: determination of lattice parameters
37. The se sensitivity of metals under swift-heavy-ion irradiation: a transient thermal process T10.1088/0953-8984/6/34/006 ↗
38. Ashcroft · 1976
39. Demtröder · 2013
40. Tribological performance of laser-based surface textured nonconformal contacts
41. The physics of ultra-short laser interaction with solids at non-relativistic intensities10.1016/j.physrep.2011.07.002 ↗
42. Hering · 2012
43. Influence of polarization angle on LIPSS formation and ablation efficiency in direct laser interference patterning of metals10.1038/s41598-025-07657-4 ↗
44. Multi-pulse agglomeration effects on ultrashort pulsed direct laser interference patterning of copper10.1016/j.apsusc.2022.155538 ↗
45. Impact of molten Pool dynamics on resultant surface structures during direct laser interference patterning
46. Tailoring submicrometer periodic surface structures via ultrashort pulsed direct laser interference patterning10.1103/PhysRevB.103.054105 ↗
47. Ultrashort pulsed laser induced complex surface structures generated by tailoring the melt hydrodynamics10.29026/oea.2022.210052 ↗
48. Time-resolved electron-temperature measurement in a highly excited gold target using femtosecond thermionic emission10.1103/PhysRevB.50.8016 ↗
49. Heat transport in metals irradiated by ultrashort laser pulses10.1103/PhysRevB.57.14698 ↗
50. Electron/phonon coupling in group-IV transition-metal and rare-earth nitrides10.1063/1.4832778 ↗
51. Transition temperature of strong-coupled superconductors10.1103/PhysRev.167.331 ↗