Bimodal Ag nanoparticle formation in TiN thin films via ion implantation and thermal annealing
Source abstract
Abstract
This study examines the structural evolution of TiN thin films subjected to silver ion implantation at fluences of 0.7 × 1017–1.3 × 1017 ions/cm2 followed by thermal annealing. The resulting ion-induced damage, atomic-scale restructuring, and silver nanoparticle formation were investigated using advanced electron microscopy and spectroscopic techniques. Ion implantation disrupted the initial columnar TiN microstructure within the projected ion range (~90 nm), consistent with theoretical simulations. Subsequent annealing promoted silver diffusion and agglomeration, resulting in a bimodal nanoparticle distribution, with larger Ag particles (30–50 nm) forming at the surface at higher fluences and smaller Ag-rich clusters remaining trapped in defect-rich subsurface regions. Surface chemical analysis further revealed the presence of metallic silver alongside partial oxidation of the TiN matrix. This dual distribution is governed by competing diffusion and defect-mediated trapping mechanisms, highlighting the role of implantation-induced defects and annealing conditions. Overall, these findings provide insight into the design of nanostructured metal–nitride systems for applications in electronic, catalytic, and surface engineering.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. Microstructural design of hard coatings10.1016/j.pmatsci.2006.02.002 ↗
2. High temperature wear behavior of titanium nitride coating deposited using high power impulse magnetron sputtering10.3390/coatings9090555 ↗
3. Pierson · 1996
4. On the thermal stability of atomic layer deposited TiN as gate electrode in MOS devices10.1109/LED.2003.816579 ↗
5. Controlling the plasmonic properties of titanium nitride thin films by radiofrequency substrate biasing in magnetron sputtering10.1016/j.apsusc.2021.149543 ↗
6. Oxides and nitrides as alternative plasmonic materials in the optical range10.1364/OME.1.001090 ↗
7. Nanoscale TiN metal gate technology for CMOS integration10.1016/j.mee.2006.01.161 ↗
8. Highly ordered TiN nanotube arrays as counter electrodes for dye-sensitized solar cells10.1039/b912776c ↗
9. DC reactively sputtered TiNx thin films for capacitor electrodes10.1007/s10854-018-9066-4 ↗
10. Regularities of the influence of the structural state of vacuum-arc-deposited TiN coatings on their resistance to abrasion10.3103/S1068366614060026 ↗
11. Optical properties of TiN films deposited by direct current reactive sputtering10.1063/1.372006 ↗
12. The properties of TiN thin films deposited by pulsed direct current magnetron sputtering10.1016/j.tsf.2008.01.001 ↗
13. Effect of deposition conditions and post deposition anneal on reactively sputtered titanium nitride thin films10.1016/j.tsf.2015.02.009 ↗
14. Surface chemistry of non-stoichiometric TiNx films grown on (100)Si substrate by DC reactive magnetron sputtering10.1016/S0022-0248(01)01742-0 ↗
15. Nonlinear optical properties of implanted metal nanoparticles in various transparent matrixes: a review
16. Optimization of sputtered titanium nitride as a tunable metal for plasmonic applications10.1364/OME.5.002786 ↗
17. Structural, morphological, and optical characterizations of Mo, CrN and Mo:CrN sputtered coatings for potential solar selective applications10.1016/j.apsusc.2018.01.267 ↗
18. Engineering embedded metal nanoparticles with ion beam technology10.1007/s00339-009-5205-3 ↗
19. Precipitation behavior of Xe at grain boundaries in Si3N4 ceramic during implantation at elevated temperature10.1016/j.jnucmat.2009.12.018 ↗
20. On high dose nitrogen implantation of PVD titanium nitride10.1016/j.surfcoat.2005.09.010 ↗
21. Synthesis of AuAg@Ag core/shell bimetallic nanoparticles in titanium nitride thin films by sequential ion implantation10.1016/j.apsusc.2019.03.243 ↗
22. Ag+ and Ca+ single implantation and co-implantation induced the cell growth and antibacterial activity of TiN/Ti-6Al-4V10.1016/j.vacuum.2022.111579 ↗
23. Formation of Au-Ag alloy nanoparticles in amorphous silicon using sequential ion implantation10.1016/j.nimb.2020.03.021 ↗
24. The effects of helium, strontium, and silver triple ions implanted into SiC10.1016/j.heliyon.2023.e20877 ↗
25. Formation of metallic nanoparticles in silicate glass through ion implantation10.1023/A:1015377530708 ↗
26. Ag+ implantation induces mechanical properties, cell adhesion and antibacterial effects of TiN/Ag multilayers in vitro10.2217/nnm-2017-0087 ↗
27. Adjusting the dose of ag-ion implantation on TiN-ag-modified SLA-Ti creates different micronanostructures: implications on bacteriostasis, biocompatibilty, and osteogenesis in dental implants10.1021/acsomega.3c04769 ↗
28. Investigation of silver nanoparticles on titanium surface created by ion implantation technology10.2147/IJN.S197782 ↗
29. Low-loss and tunable near-zero-epsilon titanium nitride10.1016/j.optmat.2017.07.035 ↗
30. Ag:TiN nanocomposite thin films for bioelectrodes: the effect of annealing treatments on the electrical and mechanical behavior
31. Silver negative-ion implantation into thermally grown thin SiO2 film on Si substrate and heat treatment for formation of silver nanoparticles10.1143/JJAP.46.6260 ↗
32. Formation of silver nanoparticles aligned near the bottom of SiO2 film on silicon substrate by negative-ion implantation and post-annealing10.1016/j.nimb.2005.08.018 ↗
33. Synthesis of ag ion-implanted TiO2 thin films for antibacterial application and photocatalytic performance10.1016/j.jhazmat.2015.05.014 ↗
34. Application of ion implantation for modification of TiO2: a review
35. Ziegler
36. Structural characterization of TiN coatings on Si substrates irradiated with Ar ions10.1016/j.matchar.2009.07.002 ↗
37. Porter · 2021
38. Quantitative chemical state XPS analysis of first row transition metals, oxides and hydroxides10.1088/1742-6596/100/1/012025 ↗
39. Resolving surface chemical states in XPS analysis of first row transition metals, oxides and hydroxides: Sc, Ti, V, Cu and Zn10.1016/j.apsusc.2010.07.086 ↗
40. Surface characterisation of plasma-nitrided titanium: an XPS study10.1016/0169-4332(94)00545-1 ↗
41. Electrochemical and thermal oxidation of TiN coatings studied by XPS10.1002/sia.740230713 ↗
42. Synthesis of high-performance titanium sub-oxides for electrochemical applications using combination of sol-gel and vacuum-carbothermic processes10.1021/acssuschemeng.7b03189 ↗
43. A complete and self-consistent evaluation of XPS spectra of TiN10.1016/j.elspec.2012.10.011 ↗
44. Study of nitrogen implantation in Ti surface using plasma immersion ion implantation & deposition technique as biocompatible substrate for artificial membranes
45. Corrosion resistance of single TiN layers, Ti/TiN bilayers and Ti/TiN/Ti/TiN multilayers on Iron under a salt fog spray (Phohesion) test: an evaluation by XPS10.1002/(SICI)1096-9918(199902)27:2<71::AID-SIA469>3.0.CO;2-G ↗
46. Self-consistent modelling of X-ray photoelectron spectra from air-exposed polycrystalline TiN thin films10.1016/j.apsusc.2016.06.012 ↗
47. Wagner · 2003