journal article·2026-06Open access

Influence of surface finishing and heat treatment on the dry sliding behaviour of the powder bed fusion-laser beam (PBF-LB) processed A357 Al-Si-Mg alloy, anodised by electrochemical oxidation (ECO)

L. Tonelli, L. Lorenzetti, G. Di Egidio, G. Pirro, I. Boromei, P. Shashkov, C. Martini

Abstract

This work focuses on the reciprocating dry sliding behaviour of PBF-LB processed A357 (AlSi7Mg0.6) anodised by Electrochemical Oxidation (ECO). This surface treatment derives from Plasma Electrolytic Oxidation (PEO) but minimises its disruptive plasma discharge effects. The tribological behaviour of the system was investigated both at room temperature and at 200 °C by ball-on-disk tests against Al 2 O 3 balls, considering the influence of: (i) substrate surface finishing before ECO (unpolished vs. pre-polished by grinding) and (ii) an optimised rapid solution and aging heat treatment (T6R) carried out on A357 to improve its tensile properties in terms of ductility-strength trade-off. Polishing the A357 substrate after printing and before ECO improves the wear behaviour of ECO layers at room temperature by improving thickness and compactness of the coating, even though it slightly increases friction due to destabilisation of low shear transfer layers. At 200 °C, the anodised alloy performance is dominated by thermal damage of the ECO coating and substrate softening effects, hence pre-polishing did not improve the tribological behaviour. Therefore, pre-polishing can be excluded from the processing cycle for PBF-LB components intended for operation at high temperature. T6R does not significantly affect the microstructure and micromechanical properties of the anodic layer and hence its tribological behaviour, both at room T and at 200 °C. Therefore, T6R can be excluded from the processing cycle if tribological performance issues dominate over tensile requirements for the reference application.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Surface Treatment and Residual Stress · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. A comprehensive overview of additive manufacturing aluminum alloys: classifications, structures, properties and defects elimination10.1016/j.msea.2024.147464 ↗
2. Totten · 2003
3. On the role of microstructure and defects in the room and high-temperature tensile behavior of the PBF-LB A357 (AlSi7Mg) alloy in as-built and peak-aged conditions10.3390/ma16072721 ↗
4. Friction and wear of aluminum alloys and composites
5. On morphological surface features of the parts printed by selective laser melting (SLM)
6. Plasma electrolytic oxidation coatings on additively manufactured aluminum–silicon alloys with superior tribological performance10.1016/j.surfcoat.2022.128246 ↗
7. Pulsed current effect on the hard anodizing of an AlSi10Mg aluminum alloy obtained via additive manufacturing10.3390/surfaces6010008 ↗
8. Effect of microstructure and porosity of AlSi10Mg alloy produced by selective laser melting on the corrosion properties of plasma electrolytic oxidation coatings10.1016/j.surfcoat.2020.126477 ↗
9. Influence of silicon morphology on direct current plasma electrolytic oxidation process in AlSi10Mg alloy produced with laser powder bed fusion10.1038/s41598-022-18176-x ↗
10. A transmission electron microscopy study of hard anodic oxide layers on AlSi(Cu) alloys10.1016/j.electacta.2004.02.030 ↗
11. Comparison of anodised aluminium surfaces from four fabrication methods10.1016/j.jmatprotec.2012.06.007 ↗
12. AC plasma electrolytic oxidation of additively manufactured and cast AlSi12 alloys10.1016/j.surfcoat.2020.126116 ↗
13. Plasma-electrolytic oxidation: a rapid single step post processing approach for additively manufactured biomedical implants10.1016/j.bioadv.2025.214186 ↗
14. Anodizing by electrochemical oxidation (ECO) of the laser powder bed fusion-processed A357 aluminium alloy: microstructural characterization and dry sliding behaviour10.1007/s40964-022-00353-z ↗
15. Anodizing of AA6082-T5 by conventional and innovative treatments: microstructural characterization and dry sliding behaviour
16. An investigation into the mechanical and tribological properties of plasma electrolytic oxidation and hard-anodized coatings on 6082 aluminum alloy10.1016/j.msea.2011.06.032 ↗
17. A357 aluminium alloy produced by LPBF: tribological behaviour in dry sliding conditions
18. Anderson · 2019 · 548
19. High temperature wear behavior of aluminum oxide layers produced by AC micro arc oxidation10.1016/j.surfcoat.2009.09.057 ↗
20. Effects of evaluated temperature on tribological behaviors of micro-arc oxidated 2219 aluminum alloy and their field application
21. Influence of temperature on tribological properties of microarc oxidation coating on 7075 aluminium alloy at 25 °C–300 °C10.1016/j.ceramint.2019.03.146 ↗
22. A study to enhance the mechanical durability of the MAO coating fabricated on the 7075 Al alloy for wear-related high temperature applications10.1016/j.surfcoat.2021.126843 ↗
23. Dry sliding wear of MAO-coated A356/20vol.% SiCp composites in the temperature range 25–180 °C10.1016/j.wear.2007.01.044 ↗
24. PEO-chameleon as a potential protective coating on cast aluminum alloys for high-temperature applications10.1016/j.surfcoat.2020.126016 ↗
25. ASTM B179-18 · 2019
26. BS EN ISO 4288:1998 · 1998
27. A novel T6 rapid heat treatment for AlSi10Mg alloy produced by laser-based powder bed fusion: comparison with T5 and conventional T6 heat treatments10.1007/s11663-021-02365-6 ↗
28. ASM International · 2017
29. ASM International · 2015
30. ASTM E92-17 · 2017
31. ISO 20502:2005 · 2005
32. Metallic materials
33. Bulk modulus and Young’s modulus of nanocrystalline γ-alumina10.1111/j.1151-2916.1994.tb04524.x ↗
34. ASM International · 2017
35. Dry sliding behavior of AlSi10Mg alloy produced by laser-based powder bed fusion: influence of heat treatment and microstructure
36. High-temperature behavior of the heat-treated and overaged AlSi10Mg alloy produced by laser-based powder bed fusion and comparison with conventional Al-Si-Mg-casting alloys10.1002/adem.202201238 ↗
37. Improved corrosion resistance of PEO coated 7085Al alloy via a novel organic and inorganic sealing-treatment combination10.1016/j.surfcoat.2022.128566 ↗
38. Porosity in plasma electrolytic oxide coatings10.1016/j.actamat.2005.12.029 ↗
39. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
40. Characterization and wear behaviour of PEO coatings on 6082-T6 aluminium alloy with incorporated α-Al2O3 particles10.1016/j.surfcoat.2014.10.048 ↗
41. Investigation of the mechanism of plasma electrolytic oxidation of aluminium using 18O tracer10.1016/j.corsci.2009.11.038 ↗
42. On the impact of Si content and porosity artifacts on the anodizing behavior of additive manufactured Al-Si alloys10.1149/2.1351914jes ↗
43. Significance of plasma electrolytic oxidation treatment on corrosion and sliding wear performances of selective laser melted AlSi10Mg alloy
44. Thermo-physical properties of plasma electrolytic oxide coatings on aluminium10.1016/j.surfcoat.2004.09.037 ↗
45. Stachowiak · 2005 · 484
46. Bhushan · 2013
47. Study on the tribological performance of ceramic coatings on titanium alloy surfaces obtained through microarc oxidation10.1016/j.porgcoat.2008.08.034 ↗
48. PEO layers obtained from mixed aluminate–phosphate baths on Ti–6Al–4V: dry sliding behaviour and influence of a PTFE topcoat10.1016/j.wear.2010.07.011 ↗
49. Comparison of dry sliding friction and wear of Ti6Al4V alloy treated by plasma electrolytic oxidation and PVD coating10.1016/j.wear.2007.01.045 ↗
50. Plasma electrolytic oxidation treatment of aluminium and titanium alloys
51. Plasma electrolytic oxidation coating on additively manufactured aluminum-silicon alloys with superior tribological performance
52. Effects of nanocrystallized layer on the tribological properties of micro-arc oxidation coatings on 2618 aluminum alloy under high temperatures10.1007/s00170-017-0831-y ↗
53. Freund · 2003
54. Bower · 2009