Tailoring mechanical properties of sputter-deposited Ti-Al-Zr metallic glass coatings via molybdenum addition
Source abstract
Abstract
Multi-Principal Element Alloy (MPEA) coatings are promising materials due to their remarkable properties, particularly when they are single-phase solid solutions. When MPEAs exhibit an amorphous phase, the difference in mechanical response from their crystalline counterpart is pronounced, considering that the metallic glasses' response under stress activates the nucleation of shear bands. However, the fundamental mechanisms that initiate and operate shear bands remain unclear, especially in more complex materials such as MPEA metallic glasses (MPEAMGs). Here, we report pop-in and serration events in sputter-deposited amorphous Ti–Al–Zr–Mo coatings. Through the changes in the mechanical behaviour, we found that Mo additions alter local atomic interactions and ordering. Such a compositional tuning drives a transition from pop-in to serration events during instrumented nanoindentation, consistent with volume contraction induced by major local ordering at higher Mo contents. This contraction suggests the nucleation of a few surface shear bands. The discussion of enhanced local atomic ordering is supported by a slight increase in hardness of about 300 MPa. We also demonstrated that Mo content affects the elastic response obtained from iterative Hertzian model fitting, with a maximum value of 155 GPa. These findings indicate that compositional variation via Mo additions provides a pathway to control atom-scale interactions and mechanical behaviour in MPEMGs, offering insights into the design of metallic glasses with tailored properties. This work serves as a valuable guide for designing and customizing MPEA coatings to achieve functional properties for potential protective-coating applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Metallurgical and Alloy Processes · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (90)
Show source-provided references
1. Nanostructured high-entropy alloys with multiple principal elements: novel alloy design concepts and outcomes10.1002/adem.200300567 ↗
2. Microstructural development in equiatomic multicomponent alloys10.1016/j.msea.2003.10.257 ↗
3. Realizing superior strength-ductility combination in dual-phase AlFeCoNiV high-entropy alloy through composition and microstructure design10.1080/21663831.2022.2093140 ↗
4. Phase formation and strengthening mechanisms in a dual-phase nanocrystalline CrMnFeVTi high-entropy alloy with ultrahigh hardness10.1016/j.jallcom.2018.02.029 ↗
5. Multi-principal element alloys from the CrCoNi family: outlook and perspectives10.1016/j.jmrt.2021.09.095 ↗
6. Review: Multi-principal element alloys by additive manufacturing10.1007/s10853-022-06961-y ↗
7. A database of mechanical properties for multi principal element alloys10.1016/j.cdc.2023.101068 ↗
8. Effect of ordered N vacancies driven by increasing Mo content in multi-principal-element Ti-Al-Zr-Mo-N coatings10.1016/j.surfcoat.2024.131312 ↗
9. Microstructure and mechanical properties of ultrafine grained CoCrFeNi and CoCrFeNiAl0.3 high entropy alloys reinforced with Cr2O3/Al2O3 nanoparticles10.1016/j.msea.2021.141313 ↗
10. Understanding chemical short-range ordering/demixing coupled with lattice distortion in solid solution high entropy alloys10.1016/j.actamat.2021.117140 ↗
11. Thermal and corrosion properties of V-Nb-Mo-Ta-W and V-Nb-Mo-Ta-W-Cr-B high entropy alloy coatings10.1016/j.surfcoat.2019.07.079 ↗
12. Discovery of a superconducting high-entropy alloy10.1103/PhysRevLett.113.107001 ↗
13. Understanding the mechanical behaviour and the large strength/ductility differences between FCC and BCC AlxCoCrFeNi high entropy alloys10.1016/j.jallcom.2017.08.067 ↗
14. Effects of mixing enthalpy and cooling rate on phase formation of AlxCoCrCuFeNi high-entropy alloys10.1016/j.mtla.2019.100292 ↗
15. High entropy alloys with hexagonal close-packed structure derived from thin film combinatorial approach10.1016/j.jallcom.2021.162293 ↗
16. Effects of minor Si addition on structural heterogeneity and glass formation of GdDyErCoAl high-entropy bulk metallic glass10.1016/j.jmrt.2021.01.035 ↗
17. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
18. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
19. Science and technology in high-entropy alloys10.1007/s40843-017-9195-8 ↗
20. Stabilization of metallic supercooled liquid and bulk amorphous alloys10.1016/S1359-6454(99)00300-6 ↗
21. Confusion by design10.1038/366303a0 ↗
22. High-entropy induced a glass-to-glass transition in a metallic glass10.1038/s41467-022-29789-1 ↗
23. Recent progress in high-entropy metallic glasses10.1016/j.jmst.2023.03.031 ↗
24. More than entropy in high-entropy alloys: forming solid solutions or amorphous phase10.1016/j.intermet.2013.05.002 ↗
25. Tailoring shear banding behaviors in high entropy bulk metallic glass by minor Sn addition: a nanoindentation study10.1016/j.jallcom.2018.05.194 ↗
26. Phase engineering of high-entropy alloys10.1002/adma.201907226 ↗
27. How amorphous nanomaterials enhanced electrocatalytic, SERS, and mechanical properties10.1021/jacsau.3c00418 ↗
28. Glass-forming ability and mechanical properties of a Zr52.8Cu29.1Ni7.3Al9.8Y1 bulk metallic glass prepared by hereditary process10.1515/gps-2015-0039 ↗
29. Coating cutting blades with thin-film metallic glass to enhance sharpness10.1038/s41598-019-52054-3 ↗
30. The wettability of metallic glasses: a review10.1007/s44251-024-00035-8 ↗
31. Shear band formation in amorphous materials under oscillatory shear deformation10.3390/met10030300 ↗
32. Mechanical characteristics of Mg-Cu-Zr thin film metallic glasses10.1016/j.surfcoat.2012.03.055 ↗
33. Understanding of the shear bands in amorphous metals10.9729/AM.2015.45.2.63 ↗
34. Focus: nucleation kinetics of shear bands in metallic glass10.1063/1.4966662 ↗
35. Nucleation of shear bands in amorphous alloys10.1073/pnas.1321518111 ↗
36. On rate-dependent serrated flow behavior in amorphous metals during nanoindentation10.1016/j.scriptamat.2005.01.045 ↗
37. Effects of pre-compression deformation on nanoindentation response of Zr65Cu15Al10Ni10 bulk metallic glass10.1016/j.jallcom.2016.03.057 ↗
38. New evidences for understanding the serrated fl ow and shear band behavior in nanoindentation of metallic glasses10.1016/j.jallcom.2020.157587 ↗
39. Softening of Zr-based metallic glass induced by nanosecond pulsed laser irradiation10.1016/j.jallcom.2018.04.278 ↗
40. Amorphous–nanocrystalline alloys: fabrication, properties, and applications
41. The effect of Mo on the glass forming ability, mechanical and magnetic properties of FePC ternary bulk metallic glasses10.1016/j.jallcom.2012.11.170 ↗
42. Effects of Mo on the glass forming ability and properties of Fe-B-C-P-Si-Mo bulk metallic glasses10.1016/j.jnoncrysol.2024.122868 ↗
43. Effects of Mo addition on thermal stability and magnetic properties of a ferromagnetic Fe75P10C10B5 metallic glass
44. High stability and high corrosion resistance of a class of Co – Cr – Mo – Nb – B high-entropy metallic glasses10.1016/j.jmrt.2024.03.035 ↗
45. On the amorphous and nanocrystalline Zr-Cu and Zr-Ti co-sputtered thin films10.1016/j.jallcom.2008.07.188 ↗
46. Calphad Thermodynamic description and phase selection for the Mo – Ti – Zr biomedical alloys10.1016/j.calphad.2020.101799 ↗
47. Under what conditions can a glass be formed?10.1080/00107516908204405 ↗
48. 2005 · ii
49. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set10.1103/PhysRevB.54.11169 ↗
50. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set10.1016/0927-0256(96)00008-0 ↗
51. Projector augmented-wave method10.1103/PhysRevB.50.17953 ↗
52. Atoms, molecules, solids, and surfaces: Applications of the generalized gradient approximation for exchange and correlation (Physical Review B (1993) 48, 7, (4978))10.1103/PhysRevB.48.4978.2 ↗
53. Special quasirandom structures10.1103/PhysRevLett.65.353 ↗
54. First-principles study of binary bcc alloys using special quasirandom structures10.1103/PhysRevB.69.214202 ↗
55. First-principles study of ternary bcc alloys using special quasi-random structures10.1016/j.actamat.2009.06.026 ↗
56. Bulk and surface ordering phenomena in binary metal alloys
57. Local lattice distortion in high-entropy alloys
58. Relation between excess volume, excess free energy and isothermal compressibility in liquid alloys10.1016/j.molliq.2020.114395 ↗
59. Partial Gibbs energies from Redlich-Kister polynomials10.1016/0040-6031(88)87198-3 ↗
60. Development of metalloid-free (FeCoNiCr)-Zr high-entropy amorphous alloy with high hardness-to-elastic modulus ratio10.1016/j.matlet.2025.137978 ↗
61. Amorphous behavior of ZrxFeNiSi0.4B0.6 high entropy alloys synthesized by mechanical alloying10.1016/j.jnoncrysol.2019.119854 ↗
62. Microstructure and mechanical properties of (AlCrTiZrV)Nx high-entropy alloy nitride films by reactive magnetron sputtering
63. Effect of nitrogen flow ratios on the structure and mechanical properties of (TiVCrZrY)N coatings prepared by reactive magnetron sputtering10.1016/j.apsusc.2010.08.078 ↗
64. Structural and mechanical properties of multi-element (AlCrMoTaTiZr)Nx coatings by reactive magnetron sputtering10.1016/j.tsf.2010.11.034 ↗
65. Continuous polyamorphic transition in high-entropy metallic glass10.1038/s41467-024-51080-8 ↗
66. Structure, properties, and crystallization of Mg-Cu-Y-Zn bulk metallic glasses10.1007/s11665-014-0972-1 ↗
67. Studies on stress corrosion cracking of Vit 105 bulk metallic glass10.3389/fmats.2020.00128 ↗
68. Unlocking metallic glasses ultra-low friction via high-entropy effect and oxidation10.1016/j.ijmecsci.2025.110507 ↗
69. Preparation and properties of a bulk metallic glass and high-entropy alloy composite10.1016/j.msea.2021.142342 ↗
70. Altering the metastable wear performance of metallic glasses via mixing entropy regulation10.1002/adfm.202507634 ↗
71. Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite10.1016/j.compositesb.2024.111222 ↗
72. Calcualtion of mixing enthalpy and mismatch entropy
73. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
74. Mechanical behavior of amorphous alloys10.1016/j.actamat.2007.01.052 ↗
75. Nanoindentation mechanical properties of glassy Cu29Zr32Ti15Al5Ni1910.1016/j.jallcom.2015.10.132 ↗
76. Thermal annealing affected microstructure evolution and creep behavior in amorphous TaTiZr medium-entropy alloy10.1016/j.jmst.2024.11.034 ↗
77. A statistical analysis of the second ‘pop-in’ behaviour of the spherical-tip nanoindentation of Zr-based bulk metallic glasses10.1016/j.mtla.2023.101862 ↗
78. Dual-phase nanostructuring as a route to high-strength magnesium alloys10.1038/nature21691 ↗
79. Plastic deformation in metallic glasses10.1016/0001-6160(79)90055-5 ↗
80. The elastic properties, elastic models and elastic perspectives of metallic glasses10.1016/j.pmatsci.2011.07.001 ↗
81. Extraordinary plasticity of an amorphous alloy based on atomistic-scale phase separation10.1016/j.msea.2007.08.068 ↗
82. Nanomechanical properties of Al-Tb marginal metallic glass10.1016/j.msea.2023.145809 ↗
83. How to catch a shear band and explain plasticity of metallic glasses with continuum mechanics10.1038/s41467-024-49829-2 ↗
84. High-entropy alloys: a critical assessment of their founding principles and future prospects10.1080/09506608.2016.1180020 ↗
85. Quantifying short-range order using atom probe tomography10.1038/s41563-024-01912-1 ↗
86. Effect of Mo content on the microstructure and mechanical properties of CoCrFeNiMox HEA coatings deposited by high power impulse magnetron sputtering10.1016/j.surfcoat.2023.130244 ↗
87. Microstructure, mechanical properties and corrosion behavior of AlxCrMoNbZr multiprincipal element alloy coatings for accident-tolerant fuel claddings: effect of Al content10.1016/j.surfcoat.2022.128656 ↗
88. Mechanical Properties of Nanostructured CoCrFeNiMn High-Entropy Alloy (HEA) Coating10.3389/fmats.2018.00041 ↗
89. Mapping the microstructure and the mechanical performance of a combinatorial Co–Cr–Cu–Fe–Ni–Zn high-entropy alloy thin film processed by magnetron sputtering technique10.1016/j.jmrt.2024.06.059 ↗
90. Bridging the gap between high-entropy alloys and metallic glasses: control over disorder and mechanical properties of coatings