journal article·2026-06Open access

Influence of ECO coating thickness and microstructural defects on corrosion, corrosion fatigue, and stress corrosion cracking in biomedical Mg alloys

Berzah Yavuzyegit, Katerina Karali, Sarah Davis, Kemal Balandiz, Lauren Jones, Nigel Smith, Sergey Usov, Pavel Shashkov, Roxane Bonithon, Gordon Blunn

Abstract

Resorbable magnesium (Mg) alloys are attractive for orthopaedic and cardiovascular implants but can degrade rapidly in physiological electrolytes, and combined corrosion–mechanical loading may trigger premature failure. Electrochemical oxidation (ECO) coatings can reduce corrosion by forming a ceramic-like surface enriched with fluoride and phosphate species, yet their brittleness raises concerns regarding integrity under concurrent corrosion and loading. Here, we investigate how ECO coating thickness influences corrosion behaviour and mechanical response under physiologically relevant conditions. AZ31 and X0 alloys were coated with 5 μm and 15 μm ECO layers and tested under static and cyclic three-point bending (3 PB) in Hank's balanced salt solution (HBSS). 3 PB fatigue tests revealed that cracks in the alloy initiate at the tensile surface and are associated with coating defects such as pits and cracks in the coating, or localised Ca P deposits. Under non-corroded conditions and after 1-week of corrosion, uncoated alloy rods demonstrated slightly higher fatigue resistance and delayed crack initiation compared to coated counterparts. After 3 weeks of immersion, only the coated rods retained load-bearing capacity, with the 15 μm coating showing the longest fatigue life. Under static sustained loading, all coatings reduced crack initiation under elastic stress, whereas the 15 μm coating suppressed through-thickness crack propagation under plastic loading and thereby prevented catastrophic SCC-style failure over the test duration. Overall, ECO coatings do not universally eliminate corrosion–mechanical interactions; rather, their protective efficacy is strongly condition-dependent and increases for the thicker coating under the environment–load combination examined.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Plates made from magnesium alloy with a long period stacking ordered structure promote bone formation in a rabbit fracture model10.1038/s41598-025-96853-3 ↗
2. Development of degradable magnesium-based metal implants and their function in promoting bone metabolism (a review)
3. Mechanical properties, biodegradation, and biocompatibility of porous Mg alloy scaffolds for load bearing bone applications10.1007/s11665-024-10316-w ↗
4. Bioresorbable vascular metallic scaffolds: current status and research trends
5. Advances in biodegradable orthopaedic implants: optimizing magnesium alloy corrosion resistance for enhanced bone repair10.1007/s44174-024-00208-x ↗
6. Machine learning-based design of biodegradable Mg alloys for load-bearing implants10.1016/j.matdes.2022.111442 ↗
7. Reverse design of Mg-Zn-Mn-Sr-Ca alloys for biodegradable implants by interpretable machine learning and genetic algorithm
8. Magnesium alloys as body implants: fracture mechanism under dynamic and static loadings in a physiological environment10.1016/j.actbio.2011.10.031 ↗
9. Cracking of magnesium-based biodegradable implant alloys under the combined action of stress and corrosive body fluid: a review10.1680/emr.13.00033 ↗
10. Biodegradable magnesium alloys as temporary orthopaedic implants: a review10.1007/s10534-019-00170-y ↗
11. Corrosion, stress corrosion cracking and corrosion fatigue behavior of magnesium alloy bioimplants10.1515/corrrev-2021-0088 ↗
12. A review of stress-corrosion cracking and corrosion fatigue of magnesium alloys for biodegradable implant applications10.1007/s11837-015-1366-z ↗
13. Stress corrosion cracking and bio-corrosion behavior of Mg–TiO2 composites
14. A magnesium screw with optimized geometry exhibits improved corrosion resistance and favors bone fracture healing10.1016/j.actbio.2024.03.002 ↗
15. In vivo assessment of high-strength and corrosion-controlled magnesium-based bone implants10.3390/bioengineering10070877 ↗
16. Magnesium-based alloys with adapted interfaces for bone implants and tissue engineering10.1093/rb/rbad095 ↗
17. A review of magnesium corrosion in bio-applications: mechanism, classification, modeling, in-vitro, and in-vivo experimental testing, and tailoring Mg corrosion rate10.1007/s10853-023-08782-z ↗
18. Influence of a MAO+ PLGA coating on biocorrosion and stress corrosion cracking behavior of a magnesium alloy in a physiological environment10.1016/j.corsci.2018.12.005 ↗
19. Corrosion modeling of magnesium and its alloys for biomedical applications10.3390/cmd1020011 ↗
20. Recent research advances on corrosion mechanism and protection, and novel coating materials of magnesium alloys: a review10.1039/D2RA07829E ↗
21. Effect of an MAO/PMTMS composite coating on the electrochemical corrosion and stress corrosion cracking behavior of an AZ80 magnesium alloy10.1016/j.corsci.2025.113308 ↗
22. Review of the effect of surface coating modification on magnesium alloy biocompatibility10.3390/ma15093291 ↗
23. In vitro evaluation of stress corrosion cracking susceptibility of PEO-coated rare-earth magnesium alloy WE4310.1016/j.surfcoat.2024.130391 ↗
24. PEO/polymer hybrid coatings on magnesium alloy to improve biodegradation and biocompatibility properties
25. Smart functionalization of PEO coating on AZ31B magnesium alloy by a novel facile one-step sealing method10.1016/j.surfcoat.2023.129674 ↗
26. A review of corrosion-resistant PEO coating on Mg alloy10.3390/coatings14040451 ↗
27. Almajidi · 2023 · 1
28. Effect of high glucose environment on stress corrosion cracking behavior of plasma electrolytic oxidation coated Mg-0.45 Ca-0.45 Zn alloy10.1016/j.surfcoat.2025.132358 ↗
29. Evaluation of corrosion performance of AZ31 Mg alloy in physiological and highly corrosive solutions10.1021/acsabm.3c01169 ↗
30. Corrosion and mechanical performance of novel electrochemical oxidation coatings on AZ31 magnesium alloys for biomedical applications10.1016/j.surfcoat.2025.132151 ↗
31. High-resolution DIC analysis of in situ strain and crack propagation in coated AZ31 magnesium alloys under mechanical loading10.1007/s10853-025-11243-4 ↗
32. Stress corrosion cracking behavior of LSP/MAO treated magnesium alloy during SSRT in a simulated body fluid10.1016/j.jallcom.2020.153707 ↗
33. Effect of graphene addition during micro-arc oxidation process on wear and corrosion properties of composite oxide layers10.1134/S2070205123700326 ↗
34. Preparation and characterization of the low-energy plasma electrolysis oxide coatings on MgLi alloy10.1016/j.surfcoat.2022.128445 ↗
35. A. Rajabi, S.M. Mousavi Khoei, R. Riahifar, T. Shahalizade, In-Situ Mos2-Modified Peo-derived Tio2 as a Carbon and Binder-free Anode for Li-Ion Batteries, Available SSRN 5256449 (n.d.).
36. In-situ SEM analysis of brittle plasma electrolytic oxidation coating bonded to plastic aluminum substrate: microstructure and fracture behaviors10.1016/j.matchar.2019.109851 ↗
37. Effect of plasma electrolytic oxidation treatment on the corrosion and stress corrosion cracking behaviour of AM50 magnesium alloy10.1016/j.msea.2008.04.031 ↗
38. Analysis of the corrosion performance of binder jet additive manufactured magnesium alloys for biomedical applications10.1016/j.jma.2021.11.016 ↗
39. Bandiera · 2021
40. High-resolution X-ray computerized tomography to characterize localized corrosion rates of carbon steel in contaminated steam cycles10.1038/s41529-025-00551-4 ↗
41. Investigating the effect of thickener concentrations on the corrosion behavior of pure Mg10.1002/jbm.a.37878 ↗
42. Corrosion mechanisms of AZ31 magnesium alloy: importance of starting pH and its evolution10.1002/maco.202213116 ↗
43. Bioactivity and corrosion behavior of magnesium barrier membranes10.1002/maco.202112385 ↗
44. Exact calculation of corrosion rates by the weight-loss method10.1017/exp.2022.5 ↗
45. Regulating corrosion reactions to enhance the anti-corrosion and self-healing abilities of PEO coating on magnesium10.1016/j.corsci.2021.109840 ↗
46. Hybrid PEO/sol-gel coatings loaded with Ce for corrosion protection of AA2024-T3
47. Corrosion behavior amelioration of Ti-based alloys by the hybrid plasma electrolytic oxidation (PEO)/polymer coatings: a review10.1016/j.hybadv.2024.100151 ↗
48. Corrosion fatigue of a magnesium alloy under appropriate human physiological conditions for bio-implant applications10.1016/j.engfracmech.2017.09.031 ↗
49. Fatigue characteristics of sand-cast AZ91D magnesium alloy10.1016/j.jma.2017.03.001 ↗
50. Corrosion fatigue of the extruded Mg–Zn–Y–Nd alloy in simulated body fluid10.1016/j.jma.2019.09.009 ↗
51. Corrosion fatigue behavior of extruded magnesium alloy AZ31 in sodium chloride solution10.1016/j.ijfatigue.2007.09.005 ↗
52. Mechanical behaviour of cp-magnesium with duplex hydroxyapatite and PEO coatings10.1016/j.msec.2014.12.081 ↗
53. A comparative study of hydrogen storage properties of AZ31 and AZ91 magnesium alloys processed by different methods10.1016/j.jallcom.2022.167854 ↗
54. Effect of aging on corrosion resistance of AZ31 magnesium alloy10.1007/s11665-023-08170-3 ↗
55. On the role of pre-exposure time and corrosion products in stress-corrosion cracking of ZK60 and AZ31 magnesium alloys10.1016/j.msea.2021.140876 ↗
56. Biodegradable polymer for sealing porous PEO layer on pure magnesium: an in vitro degradation study10.1016/j.apsusc.2014.02.100 ↗
57. Developments in plasma electrolytic oxidation (PEO) coatings for biodegradable magnesium alloys10.1016/j.matpr.2021.02.650 ↗
58. In-vitro biodegradation and corrosion-assisted cracking of a coated magnesium alloy in modified-simulated body fluid10.1016/j.msec.2017.04.079 ↗