journal article·2026-06Open access

On the influence of vibration assisted low-frequency burnishing on near-surface properties of a quenched and tempered 42CrMo4 steel

Thomas Wegener, Oliver Maiss, Johanna Zeisberg, Oliver Georgi, Thomas Niendorf

Abstract

Mechanical surface treatments are widely used to improve fatigue and wear performance by introducing compressive residual stresses through near-surface plastic deformation. In addition to conventional processes such as shot peening, deep rolling or burnishing, ultrasonic vibration-assisted processes have demonstrated efficient subsurface modification, yet their industrial applicability is limited by complex hardware integration. The present study therefore investigates a vibration-assisted burnishing approach operating at low excitation frequencies in order to decouple dynamic loading effects from ultrasonic excitation mechanisms. A newly developed process of low-frequency burnishing was applied to quenched and tempered 42CrMo4 steel. Here, the vibration amplitude and the number of vibration periods per revolution were systematically varied. Surface topography, roughness, residual stress depth profiles and hardness distributions were analyzed to identify the governing deformation characteristics. The results show that the superimposed oscillatory loading does not primarily increase peak compressive residual stresses compared to conventional deep rolling. Instead, it increases the penetration depth of the compressive residual stress field and leads to a direct transfer of vibration kinematics to the surface morphology. While residual stresses exhibit a robust depth effect, hardness responds locally and non-monotonically due to spatially heterogeneous plastic deformation. These findings indicate that low-frequency burnishing modifies the temporal characteristics of plastic deformation during continuous rolling contact rather than introducing impact-dominated deformation. Low-frequency burnishing therefore represents a distinct process variant positioned between conventional deep rolling and high-frequency vibration-assisted treatments, enabling controllable subsurface modification governed by the temporal characteristics of loading rather than ultrasonic-specific mechanisms or impact-dominated deformation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Residual Stress · Ultrasound and Cavitation Phenomena · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Surface integrity – Definition and importance in functional performance
2. Cyclic slip Irreversibilities and the evolution of fatigue damage10.1007/s11663-009-9240-4 ↗
3. A review of surface integrity in machining and its impact on functional performance and life of machined products10.1504/IJSM.2008.019234 ↗
4. Schulze · 2005
5. Effect of Surface Mechanical Treatments on the Microstructure-Property-Performance of Engineering Alloys
6. State of the art of deep rolling10.1016/j.precisioneng.2016.05.001 ↗
7. Deep rolling techniques: a comprehensive review of process parameters and impacts on the material properties of commercial steels10.3390/met14060667 ↗
8. Ultrasonic surface rolling process: properties, characterization, and applications10.3390/app112210986 ↗
9. Recent Progress in ultrasonic surface rolling: a comprehensive overview10.1002/adem.202401100 ↗
10. Investigating the Dynamic Mechanical Properties and Strengthening Mechanisms of Ti-6Al-4V Alloy by Using the Ultrasonic Surface Rolling Process
11. On the influence of ultrasonic surface rolling process on surface integrity and fatigue performance of Ti-6Al-4V alloy10.1016/j.surfcoat.2019.04.080 ↗
12. Contribution of ultrasonic surface rolling process to the fatigue properties of TB8 alloy with body-centered cubic structure10.1016/j.jmst.2020.05.047 ↗
13. Microstructural evolution and surface integrity of ultrasonic surface rolling in Ti6Al4V alloy10.1016/j.jmrt.2021.05.065 ↗
14. Modified wear behavior of selective laser melted Ti6Al4V alloy by direct current assisted ultrasonic surface rolling process10.1016/j.surfcoat.2019.125122 ↗
15. Effects of ultrasonic surface rolling parameters on surface integrity of TC17 alloy10.1007/s11665-019-04418-z ↗
16. Fretting fatigue characteristics of Ti-6Al-4V alloy with a gradient nanostructured surface layer induced by ultrasonic surface rolling process10.1016/j.ijfatigue.2019.03.042 ↗
17. Study on surface characteristics of 7050-T7451 aluminum alloy by ultrasonic surface rolling process10.1007/s00170-016-8659-4 ↗
18. Effects of ultrasonic rolling on surface performance of 7B85-T6 alloy10.1080/10426914.2020.1718701 ↗
19. Mechanical and corrosion fatigue behaviors of gradient structured 7B50-T7751 aluminum alloy processed via ultrasonic surface rolling10.1016/j.jmst.2019.08.030 ↗
20. Study on Microstructure Evolution Mechanism of Gradient Structure Surface of AA7075 Aluminum Alloy by Ultrasonic Surface Rolling Treatment
21. Influence of ultrasonic rolling on surface integrity and corrosion fatigue behavior of 7B50-T7751 aluminum alloy10.1016/j.ijfatigue.2019.04.005 ↗
22. Overall evaluation of the surface integrity in two-dimensional ultrasonic surface rolling 7050 Al alloy10.1007/s40430-020-02423-1 ↗
23. Ultrasonic-assisted ball burnishing of aluminum 6061 and AISI 1045 steel10.1080/10426914.2017.1364862 ↗
24. Ultrasonic nanocrystal surface modification of high-speed tool steel (AISI M4) layered via direct energy deposition10.1016/j.jmatprotec.2019.116420 ↗
25. Surface nanocrystallization of 17-4 precipitation-hardening stainless steel subjected to ultrasonic surface rolling process10.1016/j.msea.2018.04.033 ↗
26. An investigation of fretting fatigue behavior and mechanism in 17-4PH stainless steel with gradient structure produced by an ultrasonic surface rolling process10.1016/j.ijfatigue.2019.105340 ↗
27. The effect of ultrasonic nanocrystal surface modification on low temperature nitriding of ultra-high strength steel10.1016/j.surfcoat.2019.07.006 ↗
28. Improving the fretting and corrosion fatigue performance of 300M ultra-high strength steel using the ultrasonic surface rolling process10.1016/j.ijfatigue.2018.11.017 ↗
29. Influence of the strain rate on the surface integrity on 42CrMo4 generated by machine hammer peening10.1016/j.procir.2024.05.087 ↗
30. Measurement of dislocation distributions by means of X-ray diffraction10.1016/S0921-5093(00)01665-8 ↗