journal article·2026-06

Nanoindentation-induced deformation behavior of TiSiN coatings under different substrate bias voltages

Lijun Wang, Mengchao Wang, Yan Liu, Qian Sun, Hui Chen

Publisher page

Abstract

In this study, the phase composition, microstructure, surface morphology, and mechanical properties of TiSiN coatings deposited by cathodic arc physical vapor deposition (CAPVD) under varying substrate bias voltages were systematically investigated. Increasing negative bias voltage enhanced compressive residual stress and significantly modified the microstructure. The TiSiN-10 coating exhibited dense, elongated grains (20–100 nm) separated by ~10 nm amorphous intergranular regions, whereas the TiSiN-30 coating consisted of interlaced shorter columnar grains with amorphous phases distributed at grain boundaries and within grains, suppressing elongated crystal growth. With increasing bias voltage, hardness increased from 30.08 GPa to 45.83 GPa and elastic modulus from 475.45 GPa to 595.70 GPa, while fracture toughness reached a maximum of 9.63 MPa·m1/2 for the TiSiN-30 coating. Nanoindentation-induced crack analysis revealed that cracks in TiSiN-10 propagated straight along columnar grain boundaries and amorphous–crystalline interfaces, whereas in TiSiN-30 they followed curved paths with intergranular and transgranular features, attributed to the interlaced short columnar grains and dispersed amorphous phases. These results demonstrate that an optimal balance between compressive stress and nanocomposite architecture is critical for achieving superior mechanical performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Mechanical properties and oxidation resistance of nanocomposite TiN-SiNx physical-vapor-deposited thin films10.1016/S0257-8972(99)00481-8 ↗
2. Correlating elemental distribution with mechanical properties of TiN/SiNx nanocomposite coatings10.1016/j.scriptamat.2019.05.020 ↗
3. Oxidation behavior of arc evaporated TiSiN coatings investigated by in-situ synchrotron X-ray diffraction and HR-STEM10.1016/j.surfcoat.2020.126632 ↗
4. High Si content TiSiN films with superior oxidation resistance10.1016/j.surfcoat.2020.126087 ↗
5. Recent advances on coated milling tool technology-a comprehensive review10.3390/coatings10030235 ↗
6. Influence of oxygen addition on the structure, mechanical and thermal properties of TiSiN coating10.1016/j.vacuum.2025.114131 ↗
7. A concept for the design of novel superhard coatings10.1016/0040-6090(95)06695-0 ↗
8. Novel thermodynamically stable and oxidation resistant superhard coating materials10.1016/S0257-8972(96)02988-X ↗
9. The search for novel, superhard materials10.1116/1.581977 ↗
10. Structural analysis of Ti1-xSixNy nanocomposite films prepared by reactive magnetron sputtering10.1016/S0257-8972(99)00450-8 ↗
11. Characterisation of Ti1−xSixNy nanocomposite films10.1016/S0257-8972(00)00947-6 ↗
12. Influence of Si on the microstructure of arc evaporated (Ti,Si)N thin films; evidence for cubic solid solutions and their thermal stability10.1016/j.surfcoat.2005.08.096 ↗
13. Improved oxidation resistance of TiAlN coatings by doping with Si or B10.1016/j.surfcoat.2009.03.036 ↗
14. The location and effects of Si in (Ti1-xSix)N, thin films10.1557/jmr.2009.0299 ↗
15. Composition, nanostructure and origin of the ultrahardness in nc-TiN/a-Si3N4/a- and nc-TiSi2 nanocomposites with HV=80 to ≥105 GPa10.1016/S0257-8972(00)00957-9 ↗
16. Superhard nanocomposites: origin of hardness enhancement, properties and applications10.1016/j.surfcoat.2009.09.033 ↗
17. Improving the properties of titanium nitride by incorporation of silicon10.1016/S0257-8972(98)00560-X ↗
18. Fracture toughness of Ti-Si-N thin films10.1016/j.ijrmhm.2017.12.015 ↗
19. The location and effects of Si in (Ti1-xSix)Ny thin films10.1557/jmr.2009.0299 ↗
20. Improvement of microstructure and tribological properties of titanium nitride films by optimization of substrate bias current10.1016/j.tsf.2022.139181 ↗
21. Effect of bias voltage on the growth of super-hard (AlCrTiVZr)N high-entropy alloy nitride films synthesized by high power impulse magnetron sputtering
22. Effect of substrate bias on the microstructure and properties of (AlCrSiNbZr)Nx high entropy nitride thin film10.1016/j.surfcoat.2020.125796 ↗
23. Influence of bias voltages on the structure and wear properties of TiSiN coating synthesized by cathodic arc plasma evaporation10.1016/j.tsf.2007.07.087 ↗
24. Influence of the negative bias in ion plating on the microstructural and tribological performances of Ti–Si–N coatings in seawater10.1016/j.surfcoat.2015.09.005 ↗
25. Nanoindentation-induced deformation behaviors of tetrahedral amorphous carbon film deposited by cathodic vacuum arc with different substrate bias voltages10.1016/j.apsusc.2021.151741 ↗
26. Effect of laser intensity on the microstructural and mechanical properties of pulsed laser deposited diamond-like-carbon thin films10.1063/1.369757 ↗
27. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
28. Nanoindentation and nanoscratching responses of PEEK based hybrid composites reinforced with short carbon fibers and nano-silica10.1016/j.polymertesting.2013.02.001 ↗
29. Nanocomposite versus solid solution formation in the TiSiN system10.1016/j.actamat.2024.120063 ↗
30. Interface-dominated deformation mechanisms in Cr/CrN/Cr-DLC multilayer triggered by nanoindentation10.1016/j.msea.2023.145745 ↗
31. Competition between surface and strain energy during grain growth in free-standing and attached Ag and Cu films on Si substrates10.1016/S0169-4332(01)00782-6 ↗
32. The location and effects of Si in (Ti1-xSi)Ny thin films10.1557/jmr.2009.0299 ↗
33. Effect of thermal annealing upon residual stress and mechanical properties of nanostructured TiSiN coatings on steel substrates10.1111/j.1551-2916.2010.04280.x ↗
34. Improving thermal stability of TiSiN nanocomposite coatings by multilayered epitaxial growth10.1016/j.surfcoat.2017.04.057 ↗
35. A structure zone diagram including plasma-based deposition and ion etching10.1016/j.tsf.2009.10.145 ↗
36. Structure, mechanical properties and thermal stability of Ti1-xSixN coatings10.1016/j.ceramint.2018.05.210 ↗
37. Microstructure and mechanical properties of arc evaporated Ti(Al,Si)N coatings10.1016/j.surfcoat.2021.127461 ↗
38. Structural and tribological properties of TiSiN films with different Si content10.1016/j.tsf.2023.140059 ↗
39. Effect of bias voltage on the structure and hardness of TiSiN composite coatings synthesized by cathodic arc assisted middle-frequency magnetron sputtering10.1016/j.jallcom.2008.06.003 ↗
40. Influence of substrate bias on the scratch, wear and indentation response of TiSiN nanocomposite coatings10.1016/j.surfcoat.2021.127687 ↗
41. Corrosion mechanism investigation of TiAlN/CrN superlattice coating by multi-arc ion plating in 3.5 wt% NaCl solution10.1016/j.surfcoat.2020.125660 ↗
42. Friction behavior of diamond-like carbon coatings with different sp3 contents by atomistic-scale friction dynamics10.1016/j.surfcoat.2023.129580 ↗
43. Effect of bias voltage on TiAlSiN nanocomposite coatings deposited by HiPIMS10.1016/j.apsusc.2016.09.028 ↗
44. Tailoring the nanostructure of Ti-Si-N thin films by HiPIMS in deep oscillation magnetron sputtering (DOMS) mode10.1016/j.surfcoat.2014.12.065 ↗
45. Evolution of enhanced crystallinity and mechanical property of nanocomposite Ti–Si–N thin films using magnetron reactive co-sputtering10.1016/j.jallcom.2012.05.018 ↗
46. Mechanical and corrosion properties of (Ti,Si)N coating synthesized by cathodic arc plasma evaporation10.1016/j.surfcoat.2008.06.029 ↗
47. Mechanical and tribological properties of nanocomposite TiSiN coatings10.1016/j.surfcoat.2009.11.034 ↗
48. Effect of residual stresses on mechanical properties and interface adhesion strength of SiN thin films10.1016/j.tsf.2009.03.043 ↗