Pitting corrosion and cavitation erosion behavior of hybrid 2205/904L stainless steel coating fabricated via friction surfacing
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Cavitation Phenomena in Pumps · Erosion and Abrasive Machining · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Materials selection in mechanical design
2. Friction processing technologies10.1007/BF03266402 ↗
3. Corrosion behavior of multi-layer friction surfaced structure from dissimilar aluminum alloys10.1038/s41598-024-60431-w ↗
4. Friction surfacing of austenitic stainless steel on low carbon steel: studies on the effects of traverse speed
5. Performance analysis of friction surfacing10.1016/j.jmatprotec.2012.03.013 ↗
6. Lateral friction surfacing: experimental and metallurgical analysis of different aluminum alloy depositions10.1016/j.jmrt.2021.11.049 ↗
7. Friction surfacing of aluminium alloy 5083 on DH36 steel plate10.3390/met9040479 ↗
8. Effects of microstructure modification by friction surfacing on wear behavior of Al alloys with different Si contents10.3390/ma15051641 ↗
9. Deposit by friction surfacing and its applications10.1080/09507110902844535 ↗
10. Friction surfacing: a tool for surface crack repair10.1016/j.surfcoat.2021.127482 ↗
11. Friction surfacing of Ti–6Al–4V: process characteristics and deposition behaviour at various rotational speeds10.1016/j.surfcoat.2015.07.039 ↗
12. Effect of friction surfacing on the microstructural and wear characteristics of Al-Cu-Mg alloy coating reinforced by nickel aluminide10.1016/j.intermet.2021.107440 ↗
13. Deposition of an Al/SiC composite coating on steel by friction surfacing: corrosion and wear properties
14. Fabrication of stainless steel 316L/TiB2 composite coating via friction surfacing10.1016/j.surfcoat.2018.03.065 ↗
15. Mohammad
16. A study on the effect of friction stir processing technique for the marine applications10.1016/j.matpr.2019.07.499 ↗
17. Friction surfacing—a review10.1016/j.jmatprotec.2013.12.008 ↗
18. Improvement of cavitation erosion resistance of lean grade austenitic stainless steels by friction surfacing10.1016/j.matchemphys.2025.131144 ↗
19. Microstructure and corrosion behavior of friction-surfaced 304L austenitic stainless steels10.1007/s00170-022-09982-8 ↗
20. Friction surfacing of AISI 316 over mild steel: a characteriation study10.1016/j.dt.2018.03.003 ↗
21. Spindle speed in friction surfacing of 316L stainless steel – how it affects the microstructure, hardness and pitting corrosion resistance10.1016/j.surfcoat.2019.01.055 ↗
22. Friction surfacing of AISI 904L super austenitic stainless steel coatings: microstructure and properties10.1016/j.surfcoat.2020.126811 ↗
23. A study on formation mechanism of friction-surfaced stainless steel coating via a stop-action method10.1016/j.surfcoat.2022.128511 ↗
24. Wear and corrosion performance of AISI 410 martensitic stainless steel coatings produced using friction surfacing and manual metal arc welding10.1016/j.surfcoat.2012.06.075 ↗
25. Microstructures and properties of friction surfaced coatings in AISI 440C martensitic stainless steel10.1016/j.surfcoat.2012.07.001 ↗
26. Friction surfacing of precipitation hardening stainless steel coatings for cavitation erosion resistance10.1016/j.surfcoat.2022.128206 ↗
27. Improvement of cavitation erosion resistance of a duplex stainless steel through friction stir processing (FSP)10.1016/j.wear.2012.10.005 ↗
28. Hoyos · 2012
29. Deformation behavior and microstructural evolution of as-cast 904L austenitic stainless steel during hot compression10.1016/j.msea.2012.12.043 ↗
30. Recrystallization and grain growth of AISI 904L super-austenitic stainless steel: a multivariate regression approach10.3390/met12020200 ↗
31. Effect of sigma (σ) phase precipitation on the recrystallization kinetics of AISI 904L superaustenitic stainless steel10.1016/j.vacuum.2023.112830 ↗
32. A high performance mechanically alloyed stainless steel composite coating via friction surfacing10.1016/j.surfcoat.2025.132685 ↗
33. Cavitation erosion resistance of 316L stainless steel fabricated using selective laser melting10.1007/s40544-020-0443-7 ↗
34. Revision of cavitation erosion database and analysis of stainless steel data10.1016/j.wear.2009.07.005 ↗
35. Cavitation erosion of stainless steels10.1016/0043-1648(82)90278-2 ↗
36. Cavitation erosion behavior of Cr-Ni-Mo duplex stainless steel
37. The role of process temperature and rotational speed in the microstructure evolution of Ti-6Al-4V friction surfacing coatings10.1016/j.matdes.2016.07.132 ↗
38. Cavitation erosion behavior of Hastelloy C-276 nickel-based alloy10.1016/j.jallcom.2014.08.248 ↗
39. Cavitation erosion behavior of GH 4738 nickel-based superalloy10.1016/j.triboint.2020.106833 ↗
40. Advanced experimental and numerical techniques for cavitation erosion prediction
41. Davis · 1994
42. Differentiation of specific wear rates of AISI 304 austenitic and AISI 2205 duplex stainless steels at room and high temperatures10.1016/j.heliyon.2022.e11807 ↗
43. Weldability, machinability and surfacing of commercial duplex stainless steel AISI2205 for marine applications - a recent review10.1016/j.jare.2017.01.002 ↗
44. Friction stir welding of dissimilar materials: an investigation of microstructure and nano-indentation study10.1016/j.jmapro.2020.03.050 ↗
45. Enhancing metallurgical and mechanical properties of friction stir lap welding of aluminum alloys by microstructure reconstruction10.1038/s41598-024-83493-2 ↗
46. Microstructural evolution and softening mechanism of 2205 duplex stainless steel during hot compression
47. Dynamic recrystallization behavior of as-rolled 904L super austenitic stainless steel
48. Hot deformation behavior of duplex stainless steel 2205
49. Modelling of hot flow stress of duplex steel in dependence of microstructure using the rule of mixture10.3390/met11081285 ↗
50. Screw dislocation slip and its interaction with ½[111¯] dislocation loop in bcc-Fe at different temperatures10.7498/aps.70.20201659 ↗
51. Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD10.1016/j.msea.2010.01.004 ↗
52. Enhanced work hardening in ferrite and austenite of duplex stainless steel at 200 K: in situ neutron diffraction study10.1016/j.msea.2025.148602 ↗
53. Evolution of microstructure and crystallographic texture during dissimilar friction stir welding of duplex stainless steel to low carbon-manganese structural steel10.1007/s11661-018-5023-3 ↗
54. Microstructural refining during friction stir processing of SAF 2205 duplex stainless steel
55. On dynamic recrystallisation under hot working of superaustenitic stainless steel10.1179/1743284713Y.0000000406 ↗
56. Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect10.1016/j.msea.2018.03.023 ↗
57. On the formation of grain structure during friction stir welding of duplex stainless steel10.1016/j.msea.2010.07.011 ↗
58. Dynamic restoration of the ferrite and austenite phases during hot compressive deformation of a lean duplex stainless steel10.1016/j.msea.2020.139400 ↗
59. Dynamic recovery and dynamic recrystallization competition on a Nb- and N-bearing austenitic stainless steel biomaterial: influence of strain rate and temperature10.1016/j.msea.2013.06.037 ↗
60. Pan · 2011 · 1
61. Development of a novel severe plastic deformation method: friction stir equal channel angular pressing10.1007/s00170-015-8305-6 ↗
62. Experimentally established correlation of friction surfacing process temperature and deposit geometry10.1016/j.surfcoat.2020.126040 ↗
63. Theory of torsion texture development10.1016/0001-6160(84)90050-6 ↗
64. Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing10.1016/j.matdes.2015.03.052 ↗
65. Texture formation during equal channel angular extrusion of fcc and bcc materials: comparison with simple shear10.1016/j.msea.2004.11.032 ↗
66. Electron backscatter diffraction investigation of heat deformation behavior of 2205 duplex stainless steel10.1002/srin.202000587 ↗
67. Deformation and annealing behavior of NITROGEN alloyed duplex stainless steels. Part II: annealing10.2355/isijinternational.43.1788 ↗
68. Effect of cold rolling reduction on texture, recrystallization and mechanical properties of UNS S32304 Lean Duplex stainless steel10.1016/j.msea.2020.140577 ↗
69. New comprehension on the microstructure, texture and deformation behaviors of UNS S32101 duplex stainless steel fabricated by direct cold rolling process10.1016/j.msea.2022.143150 ↗
70. Texture, microstructure and mechanical properties of laser beam welded AISI 2507 super duplex stainless steel10.1016/j.matchemphys.2022.126490 ↗
71. Microstructural evolution during hot deformation of duplex stainless steel10.1179/174328407X239019 ↗
72. Effect of grain refinement on the electrochemical corrosion behavior of friction stir processing 7075 aluminum alloy
73. Effects of natural aging on mechanical properties and electrochemical corrosion behavior of 7A04 aluminum alloy
74. Corrosion resistant nanostructured eutectic high entropy alloy10.1016/j.corsci.2019.108315 ↗
75. Corrosion behavior of arc-sprayed pore-sealed Zn and Al coatings in seawater containing sulfate-reducing bacteria (SRB)10.1007/s11666-021-01234-7 ↗
76. Corrosion performance of AISI-309 exposed to molten salts V2O5-Na2SO4 at 700°C applying EIS and Rp electrochemical techniques
77. The influence of porosity and precipitates on the corrosion behavior of A356 aluminum alloy10.1016/j.jelechem.2023.117796 ↗
78. Texture dependence of corrosion of mild steel after cold rolling10.1179/bcj.1976.11.1.40 ↗
79. Insight into microstructure, microhardness and corrosion performance of 2205 duplex stainless steel: effect of plastic pre-strain10.1016/j.corsci.2022.110847 ↗
80. Enhancement of the corrosion resistance and mechanical properties of nanocrystalline titanium by low-temperature annealing10.1016/j.corsci.2018.11.016 ↗
81. Influence of grain refinement on the corrosion behavior of metallic materials: a review10.1007/s12613-021-2308-0 ↗
82. Anisotropy of microstructure and corrosion resistance of 316L stainless steel fabricated by wire and arc additive manufacturing10.1016/j.corsci.2022.110549 ↗
83. Enhanced corrosion resistance by engineering crystallography on metals10.1038/s41467-022-28368-8 ↗
84. Effect of reduction sequence during rolling on deformed texture and anisotropy of ferritic stainless steel10.3390/ma16103767 ↗
85. Tribological properties and sulfuric acid corrosion resistance of laser clad CoCrFeNi high entropy alloy coatings with different types of TiC reinforcement10.1016/j.triboint.2023.108870 ↗
86. Microstructure and micro-hardness analysis of friction stir welded bi-layered laminated aluminum sheets
87. Cavitation erosion behavior of high-nitrogen austenitic stainless steel: effect and design of grain-boundary characteristics10.1016/j.matdes.2021.109496 ↗
88. Improvement of the cavitation erosion resistance of an AISI 304L austenitic stainless steel by high temperature gas nitriding10.1016/j.msea.2004.05.003 ↗
89. Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3.5% NaCl solution10.1016/S0921-5093(00)00899-6 ↗
90. Damage mechanism of cavitation erosion in austenite→martensite phase transformable Fe–Cr–C–Mn/Ni alloys10.1016/j.wear.2013.12.015 ↗
91. Cavitation erosion of duplex and super duplex stainless steels10.1016/S1359-6462(98)00308-X ↗
92. Effect of copper addition on tensile behavior in Fe-Cr-Ni stable austenitic stainless steel10.1016/j.matchar.2022.112052 ↗
93. Stacking fault energies of seven commercial austenitic stainless steels10.1007/BF02641927 ↗
94. Cavitation erosion resistance of stellite alloy weld overlays10.1016/j.wear.2009.05.007 ↗
95. Fatigue crack growth behavior of friction stir processed super duplex stainless steels (SAF- 2507)
96. Influence of friction stir processing on mechanical behavior of 2507 SDSS10.3390/met10030369 ↗
97. Effective grain size dependence of crack propagation resistance in low carbon steel10.1016/j.tafmec.2023.103762 ↗
98. Effects of grain structures on fatigue crack propagation behavior of an Al-Cu-Li alloy10.1016/j.ijfatigue.2023.107927 ↗
99. Understanding the roles of deformation-induced martensite of 304 stainless steel in different stages of cavitation erosion10.1016/j.triboint.2020.106752 ↗
100. Microstructure and corrosion properties of the AISI 904L weld cladding obtained by the electro slag process10.1016/j.jmrt.2021.10.094 ↗