journal article·2026-07

The control mechanism of heat treatment on grain boundary structure and interdiffusion kinetics in laser-clad Cu/Mo immiscible alloy coatings

Chao Wang, Yuxin Li, Jianjun Li, Yuhang Li, Yongcong Cao, Ying Gao, Yang Li, Jianwen Liu, Jie Wu, Wei Liu, Conglin Zhang

Publisher page

Abstract

The poor interfacial bonding in Cu/Mo immiscible alloys due to thermodynamic incompatibility severely compromises their mechanical properties and applications. This study investigates the microstructure evolution and interdiffusion behavior of Cu/Mo coatings prepared by laser cladding and subsequent heat treatment, integrating multiscale characterization and molecular dynamics simulations. The results demonstrate that heat treatment induces dynamic phase transformations, evolving from MoO2 and Cu2O (10 min) to CuO (20 min), and finally to solely MoO2 alongside the matrix (30 min). Simultaneously, it promotes a transition from columnar to equiaxed grains in the Mo layer, along with pore shrinkage and the creation of effective Cu diffusion pathways. Elemental analysis shows the interfacial interdiffusion distance increases from 0.67 μm to 1.63 μm, with the growth rate decelerating over time. These microstructural optimizations yield superior mechanical properties after 20 min, where the coating exhibits a 96.2% hardness enhancement and a reduced wear rate of 6.4×10−5 mm3·N−1·m−1. Molecular dynamics simulations elucidate the atomic-scale diffusion mechanism. The process is dominated by non-equilibrium diffusion, exhibiting an initial coefficient of 1.6×10−5 m2/s that decays to 7.74×10−6 m2/s. The simulations confirm vacancies and dislocations as primary atomic migration pathways. This work clarifies the non-equilibrium interdiffusion kinetics in the Cu/Mo system, providing a theoretical foundation for interface design and performance optimization in immiscible alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Densification and microstructure studies of Mo-30–40 wt% Cu nanocomposites prepared through chemical route10.1016/j.jallcom.2023.168740 ↗
2. Microstructure, hardness, and tribological properties of Mo-MoSi2 double layer prepared by red-blue laser cladding and embedding composite technology10.1016/j.surfcoat.2024.131183 ↗
3. Comparative study of the properties of Cu-Cr-Mo system electrical contact material by sintering and infiltration methods10.3390/met11050700 ↗
4. Mechanical properties and expansion coefficient of Mo-Cu composites with different Ni contents10.1007/s12598-012-0522-7 ↗
5. Synthesis and characterization of CuWO4 nanoparticle and CuWO4/NiO nanocomposite using co-precipitation method; application in photodegradation of organic dye in water10.1007/s10854-018-9504-3 ↗
6. Preparation and performance of Mo/Cu/Fe multi-layer composite coating with staggered spatial structure by electro-explosive spraying technology10.3390/ma15103552 ↗
7. Mechanism study of composite co-deposited Cu/Co-Mo corrosion-resistant coating on 6061 Al alloy10.1016/j.surfcoat.2023.130202 ↗
8. Influence of Ti addition on the microstructure and comprehensive properties of Mo–Cu alloy10.1016/j.jmrt.2024.04.050 ↗
9. Dry sliding wear behaviour of cold-sprayed Cu-MoS2 and Cu-MoS2-WC composite coatings: the influence of WC10.1016/j.triboint.2017.12.015 ↗
10. Laser cladding Mo-based coatings on copper alloys to improve the current-carrying tribological properties of Cu/Al friction pairs10.1016/j.surfcoat.2024.130989 ↗
11. Preparation process and mechanical properties of laser cladding gradient molybdenum coating on copper alloy10.1016/j.surfcoat.2023.129888 ↗
12. Current-carrying tribological properties and wear mechanisms of Mo-containing Cu alloy coatings produced by laser cladding10.1016/j.triboint.2024.110107 ↗
13. A novel superhard, wear-resistant, and highly conductive Cu-MoSi2 coating fabricated by high-speed laser cladding technique
14. Defect formation mechanism and performance study of laser cladding Ni/Mo composite coating10.3390/coatings11121460 ↗
15. Atomic-scale investigation on diffusion mechanism of immiscible Mo/Cu system under different temperatures and electric field10.1007/s10853-024-10257-8 ↗
16. Studies on mutual diffusion between Mo and α-Ti during thermal evaporation10.1016/j.vacuum.2021.110115 ↗
17. Investigation of atomic diffusion behavior of Mo/Au interface10.1016/j.matchemphys.2020.123839 ↗
18. Fabrication of Mo–Cu composites by a diffusion-rolling procedure10.1016/j.ijrmhm.2013.11.003 ↗
19. Spontaneously formed dense Cu nanoislands and superior SERS properties of Cu nanoislands/Cu-Ta-Mo films
20. Diffusion barrier performance of electrodeposited Co–Mo layer in 3D interconnect Cu/Sn bonding10.1016/j.jmrt.2025.02.047 ↗
21. Fabrication of Mo-20Cu sheets via liquid sintering, cold rolling and heat treatment
22. Influence of strengthening elements and heat treatment on microstructure and fracture toughness of NiAl-Cr (Mo)-based eutectic alloy10.3390/ma16093362 ↗
23. Magnetic performance optimization of Fe-Ni-Mo soft magnetic composites based on regulating the annealing temperature for atomic layer deposition coated powder10.1016/j.ceramint.2025.08.103 ↗
24. Microstructure evolution, mechanical properties and tailoring of coefficient of thermal expansion for Cu/Mo/Cu clad sheets fabricated by hot rolling10.1016/S1003-6326(22)65948-X ↗
25. Enhanced corrosion and tribocorrosion behavior of plasma electrolytic oxidized coatings on 5052 aluminum alloy with addition of pullulan to silicate electrolyte10.1016/j.jallcom.2023.170782 ↗
26. Microstructure evolution and fracture mechanism of Mo/Cu alloyed interface during plastic deformation10.1016/j.jmrt.2025.08.028 ↗
27. Microscopic modeling of interfaces in Cu-Mo nanocomposites: the case study of nanometric metallic multilayers10.3390/met15030282 ↗
28. Molecular dynamics simulation study on the friction performance of WS2 coated copper during the scratching process10.1016/j.triboint.2023.108839 ↗
29. Microstructural evolution and tribological behavior of Mo–Cu–N coatings as a function of Cu content10.1016/j.matchemphys.2011.08.002 ↗
30. Microstructural evolution and sliding wear behavior of laser-cladded/remelted Cu—W coatings after heat treatment10.1016/j.surfcoat.2026.133422 ↗
31. Effect of Cr content on pore morphology and pore-forming mechanism of porous NiCrMoCu alloys
32. Strengthening and toughening mechanism of coarse-grained heat-affected zone for the Cr-/Mo-free Cu-bearing HSLA steel under high heat input welding conditions10.1007/s10853-022-07631-9 ↗
33. Refinement mechanism of nanoscale Cu-rich precipitates by Mo addition and its effect on strength-toughness of Cu-bearing low carbon high strength steel10.1016/j.msea.2022.143469 ↗
34. Effect of Mo addition on microstructure and mechanical properties of Cu-12.5Ni-5Sn alloy
35. Pressure effects on a novel W-Mo-Cu alloy by large current electric field sintering: sintering behavior, microstructure and properties10.1016/j.jallcom.2019.01.297 ↗
36. Mo-30 wt%cu composites with excellent electrical and mechanical properties strengthened by interfacial diffusion10.1016/j.matchar.2025.114947 ↗
37. Tribo-electrical properties of copper matrix composites in salt-fog environment10.1016/j.triboint.2024.109299 ↗
38. Tribo-corrosion performance of laser cladding CuNiTiCrNb(h-BN)x high-entropy alloy coatings10.1016/j.triboint.2025.111190 ↗
39. Study of tribological property of laser-cladded FeCoCrNiMnx high-entropy alloy coatings via experiment and molecular dynamics simulation10.1016/j.triboint.2023.109106 ↗
40. Calculation of grain boundary diffusion coefficients in γU-Mo using atomistic simulations10.1016/j.jnucmat.2024.155190 ↗
41. Molecular dynamics simulation of MoCu diffusion bonding mechanism based on NEP + ZBL potential function10.1016/j.commatsci.2025.114340 ↗
42. Hybrid molecular dynamic Monte Carlo simulation and experimental production of a multi-component Cu-Fe-Ni-Mo-W alloy10.1016/j.intermet.2023.107960 ↗