journal article·2026-07Open access

Development and characterisation of an Zr-based electrolyte for the formation of an Al2O3/ZrO2 composite coating through plasma electrolytic oxidation

Claudia Albero Rojas, Mohammad Dodangi, Frank Simchen, Lisa Winter, Thomas Lampke

Abstract

Due to their favourable mechanical properties, aluminium alloys are widely used in engineering applications but require surface treatments to enhance corrosion and wear resistance. Plasma electrolytic oxidation (PEO) enables the formation of ceramic coatings with improved functional performance. However, PEO coatings can significantly reduce the damage tolerance of components due to their brittle and porous nature. In this work, an alkaline silicate-based electrolyte containing zirconium was developed to form an Al 2 O 3 /ZrO 2 composite coating, aiming to increase the fracture toughness and, consequently, the damage tolerance of the PEO coating. Tartrate ions were used as complexing agents to stabilise the solution. Polarisation tests revealed that reducing both the zirconium salt and the complexing agent improved passivation behaviour, allowing the identification of two optimised electrolytes with passivation performance comparable to the reference process. PEO experiments showed distinct differences in process stability between the two electrolytes: the lower-concentration electrolyte enabled reproducible coating formation, whereas the higher-concentration electrolyte exhibited turbidity and reduced discharge activity after initial processing, likely due to the precipitation of sparingly soluble zirconium hydroxides. SEM, EDX, and XRD analyses confirmed the successful formation of Al 2 O 3 /ZrO 2 composite coatings in both electrolyte systems. Zirconium was preferentially incorporated into the outer coating region, while only minor amounts were detected in the inner layer.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Advancements in Solid Oxide Fuel Cells · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. European Aluminium Association · 2026
2. Anodizing – A key surface treatment for aluminium10.4028/www.scientific.net/KEM.384.263 ↗
3. Plasma electrolysis for surface engineering10.1016/S0257-8972(99)00441-7 ↗
4. Wear-resistant coatings aluminium produced by plasma anodising—A correlation of wear properties, microstructure, phase composition and distribution10.1016/j.surfcoat.2013.12.021 ↗
5. Plasma electrolytic oxidation of high-strength aluminium alloys—Substrate effect on wear and corrosion performance10.3390/met8050356 ↗
6. High cycle fatigue behavior of the severely plastically deformed 6082 aluminum alloy with an anodic and plasma electrolytic oxide coating10.1016/j.surfcoat.2018.06.044 ↗
7. The effect of plasma electrolytic oxidation on the mean stress sensitivity of the fatigue life of the 6082 aluminum alloy10.1088/1757-899X/118/1/012033 ↗
8. Effects of micro arc oxidation on fatigue limits and fracture morphologies of 7475 high strength aluminum alloy10.1016/j.jallcom.2015.07.262 ↗
9. High-cycle fatigue behavior of microarc oxidation coatings deposited on a 6061-T6 al alloy10.1007/s11661-009-0057-1 ↗
10. Influence of plasma electrolytic oxidation coatings on fatigue performance of AZ31 Mg alloy10.1002/maco.201609088 ↗
11. Crack growth resistance of alumina, zirconia andzirconia toughened alumina ceramics for joint prostheses10.1016/S0142-9612(01)00206-X ↗
12. Bozena · 2019
13. Relationship between sintering conditions, microstructure and properties of alumina 10 vol% zirconia nanocomposites
14. Incorporation of zirconia particles into coatings formed on magnesium by plasma electrolytic oxidation10.1007/s10853-007-2360-9 ↗
15. Incorporation of zirconia nanoparticles into coatings formed on aluminium by AC plasma electrolytic oxidation10.1007/s10800-008-9575-6 ↗
16. Study on the microstructure and corrosion resistance of ZrO2-containing ceramic coatings formed on magnesium alloy by plasma electrolytic oxidation10.1016/j.jallcom.2008.06.151 ↗
17. Influence of Zr4+ ions on solar absorbance and emissivity of coatings formed on AZ31 Mg alloy by plasma electrolytic oxidation10.1016/j.surfcoat.2015.01.070 ↗
18. Alumina- zirconia coatings produced by Plasma Electrolytic Oxidation on Al alloy for corrosion resistance improvement10.1016/j.jallcom.2017.07.058 ↗
19. Preparation of thermal control coatings on Ti alloy by plasma electrolytic oxidation in K2ZrF6 solution10.1016/j.surfcoat.2015.01.032 ↗
20. Zirconia based ceramic coating on a metal with plasma electrolytic oxidation10.1088/1757-899X/18/20/202005 ↗
21. Evaluation of fracture toughness of plasma electrolytic oxidized Al2O3/ZrO2 coatings utilizing nano-scratch technique10.3390/coatings13040799 ↗
22. In-situ fabrication of durable corrosion-resistant ZrO2/Al2O3 coating on 3D-printed AlSi10Mg via two-step micro-arc oxidation10.1016/j.surfcoat.2025.133133 ↗
23. Kurze · 1982
24. About anodic oxidation of aluminum under spark discharge ANOF in aqueous electrolytes
25. A model for galvanostatic anodising of al in alkaline solutions10.1016/j.electacta.2005.03.052 ↗
26. Voltastatic studies of magnesium anodising in alkaline solutions10.1016/j.surfcoat.2010.10.013 ↗
27. Characterisation method of the passivation mechanisms during the pre-discharge stage of plasma electrolytic oxidation indicating the mode of action of fluorides in PEO of magnesium10.3390/coatings10100965 ↗
28. Formation of corundum-rich alumina coatings on low-carbon steel by plasma electrolytic oxidation10.1088/1757-899X/1147/1/012007 ↗
29. Gens · 1967
30. The incorporation of Nano-MoSi2 particles into a black PEO coating on ti alloy and its corrosion performance10.3390/coatings15020145 ↗