Interplay of structural and magnetic properties in hematite/magnetite anodic nanotubes for photoelectrochemical water splitting
Source abstract
Abstract
Hematite (α-Fe₂O₃) is a promising photoanode material for solar water splitting due to its abundance, stability, suitable band gap and low cost. However, its photoelectrochemical (PEC) performance is often limited by poor electrical conductivity and high charge carrier recombination. In this work, self-organized anodic iron oxide nanotubes were synthesized by electrochemical anodization and systematically studied as a function of annealing temperature (400–700 °C) and nanotube length with different anodization times (leading up to 4 μm) to establish a clear structure–property–performance relationship. Structural and magnetic characterization revealed the coexistence of hematite (α-Fe₂O₃) and magnetite (Fe₃O₄) phases, confirmed by Morin and Verwey magnetic transitions. Annealing at 600 °C promotes predominantly hematite (∼80%) with controlled magnetite contribution and improved crystallinity. Electrochemical impedance spectroscopy and Mott–Schottky analysis demonstrate reduced semiconductor resistance, lower interfacial charge transfer resistance, faster charge transfer kinetics and suppressed recombination for shorter nanotubes (2 min anodization). The optimized photoelectrodes exhibit the highest photocurrent density, lowest onset potential and highest intrinsic solar-to-chemical (ISTC) efficiency. These results demonstrate that controlling phase balance of, defect density and nanotube length is more critical than maximizing optical absorption for improving hematite-based photoelectrodes for solar fuel production.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Iron oxide chemistry and applications · Magnetic Properties and Synthesis of Ferrites · Microbial Fuel Cells and Bioremediation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (76)
Show source-provided references
1. Electrochemical photolysis of water at a semiconductor electrode10.1038/238037a0 ↗
2. Photoelectrochemical cells10.1038/35104607 ↗
3. Visible light-induced water oxidation on mesoscopic α-Fe2O3 films made by ultrasonic spray pyrolysis10.1021/jp044127c ↗
4. Key strategies to advance the photoelectrochemical water splitting performance of α-Fe2O3 photoanode10.1002/cctc.201801187 ↗
5. Recent trends in development of hematite (α-Fe2O3) as an efficient photoanode for enhancement of photoelectrochemical hydrogen production by solar water splitting10.1016/j.ijhydene.2020.07.111 ↗
6. A review on photoelectrochemical hydrogen production systems: challenges and future directions10.1016/j.ijhydene.2018.12.037 ↗
7. Advancing photoelectrochemical systems for sustainable energy and chemical production: challenges and opportunities10.1038/s44296-025-00061-z ↗
8. Photoelectrochemical cells for solar hydrogen production: challenges and opportunities10.1063/1.5109785 ↗
9. Research update: strategies for efficient photoelectrochemical water splitting using metal oxide photoanodes10.1063/1.4861798 ↗
10. Solar hydrogen production with nanostructured metal oxides10.1039/b718969a ↗
11. Van de Krol · 2012
12. Semiconducting materials for photoelectrochemical energy conversion10.1038/natrevmats.2015.10 ↗
13. Controlled aqueous chemical growth of oriented three-dimensional crystalline nanorod arrays: application to iron (III) oxides10.1021/cm001202x ↗
14. One-dimensional quantum-confinement effect in α-Fe2O3 ultrafine nanorod arrays10.1002/adma.200500992 ↗
15. Water Photooxidation by smooth and ultrathin α-Fe2O3 nanotube arrays10.1021/cm8030208 ↗
16. Synthesis and photoelectrochemical properties of nanoporous iron (III) oxide bypotentiostatic anodization10.1088/0957-4484/17/17/001 ↗
17. Temperature-dependent growth of self-assembled hematite (α-Fe2O3) nanotube arrays: rapid electrochemical synthesis and photoelectrochemical properties10.1021/jp904560n ↗
18. High aspect ratio, self-ordered iron oxide nanopores formed by anodization of Fe in ethylene glycol/NH4F electrolytes10.1002/pssr.200802285 ↗
19. Self-assembled hematite (α-Fe2O3) nanotube arrays for photoelectrocatalytic degradation of azo dye under simulated solar light irradiation10.1016/j.apcatb.2010.01.022 ↗
20. The role of mild and hard anodization regimes of iron oxide nanotubes in the photoelectrochemical performance10.1016/j.jelechem.2022.116903 ↗
21. Unravelling nanoporous anodic iron oxide formation10.1016/j.electacta.2019.135241 ↗
22. Anodic nanotubular/porous hematite photoanode for solar water splitting: substantial effect of iron substrate purity10.1002/cssc.201300603 ↗
23. Study of the annealing conditions and photoelectrochemical characterization of a new iron oxide bi-layered nanostructure for water splitting10.1016/j.solmat.2016.04.005 ↗
24. Applied surface science controlled hydrodynamic conditions on the formation of iron oxide nanostructures synthesized by electrochemical anodization: effect of the electrode rotation speed10.1016/j.apsusc.2016.09.073 ↗
25. Influence of electrolyte temperature on the synthesis of iron oxide nanostructures by electrochemical anodization for water splitting10.1016/j.ijhydene.2018.03.046 ↗
26. Iron oxide nanostructures for photoelectrochemical applications: effect of applied potential during Fe anodization10.1016/j.jiec.2018.10.020 ↗
27. How does anodization time affect morphological and photocatalytic properties of iron oxide nanostructures?10.1016/j.jmst.2019.07.046 ↗
28. Photoelectrochemical properties of anodic iron oxide layers10.1016/j.jelechem.2022.116143 ↗
29. In-situ construction of photoanode with Fe2O3/Fe3O4 heterojunction nanotube array to facilitate charge separation for efficient water splitting10.1016/j.jallcom.2022.165787 ↗
30. Effects of anodizing conditions and annealing temperature on the morphology and crystalline structure of anodic oxide layers grown on iron10.1016/j.apsusc.2017.07.156 ↗
31. In situ synthesis of α-Fe2O3/Fe3O4 heterojunction Photoanode via fast flame annealing for enhanced charge separation and water oxidation10.1021/acsami.0c19927 ↗
32. Electronically-coupled phase boundaries in α-Fe2O3/Fe3O4 nanocomposite Photoanodes for enhanced water oxidation10.1021/acsanm.8b01936 ↗
33. Highly [210] oriented porous α-Fe2O3/Fe3O4/ Fe mesocrystalline photoanode for efficient water splitting10.1021/acs.jpcc.4c05629 ↗
34. Cornell · 2003
35. Magnetic properties of hematite nanotubes elaborated by electrospinning process10.1021/jp203426j ↗
36. Low-temperature magnetic properties of hematite nanorods10.1021/cm062375a ↗
37. Díaz-Guerra Viejo · 2009
38. Magnetic anisotropy of vertically aligned α-Fe2O3 nanowire array10.1063/1.2393165 ↗
39. The magnetism of micro-sized hematite explained10.1016/j.pepi.2010.08.008 ↗
40. Microstructure and magnetism of nanoparticles with γ-Fe core surrounded by α-Fe and iron oxide shells10.1103/PhysRevB.81.094418 ↗
41. Nanoscale topography: a tool to enhance pore order and pore size distribution in anodic aluminum oxide10.1021/jp202336j ↗
42. The role of the Ti surface roughness in the self-ordering of TiO2 nanotubes: a detailed study of the growth mechanism10.1039/C4TA00871E ↗
43. Modeling the growth kinetics of anodic TiO2 nanotubes10.1021/jz502380b ↗
44. The role of mild and hard anodization regimes of iron oxide nanotubes in the photoelectrochemical performance10.1016/j.jelechem.2022.116903 ↗
45. Influence of protected annealing on the magnetic properties of γ-Fe2O3 nanoparticles10.1021/jp305069a ↗
46. Photoelectrochemical cells for hydrogen production from solar energy
47. On the solar to hydrogen conversion efficiency of photoelectrodes for water splitting10.1021/jz501716g ↗
48. Kubelka · 1931
49. Optical properties and electronic structure of amorphous Ge and Si10.1016/0025-5408(68)90023-8 ↗
50. Photoelectrochemical water splitting with mesoporous hematite prepared by a solution-based colloidal approach10.1021/ja101564f ↗
51. Anodic growth of highly ordered TiO2 nanotube arrays to 134 μm in length10.1021/jp064020k ↗
52. Macro, micro and nanostructure of TiO2 anodised films prepared in a fluorine-containing electrolyte10.1007/s10853-006-1474-9 ↗
53. Nucleation and early growth of anodized TiO2 film10.1557/JMR.2008.0276 ↗
54. Iron oxide tube-in-tube nanostructures10.1021/jp073837q ↗
55. Control of crystalline phases in magnetic Fe nanoparticles inserted inside a matrix of porous carbon10.1016/j.jmmm.2009.04.058 ↗
56. Photoelectrochemical water splitting: thermal annealing challenges on hematite nanowires10.1021/acs.jpcc.0c01259 ↗
57. Photoanodes with fully controllable texture: the enhanced water splitting efficiency of thin hematite films exhibiting solely (110) crystal orientation10.1021/acsnano.5b01740 ↗
58. Onset potential behavior in α-Fe2O3 photoanodes: the influence of surface and diffusion Sn doping on the surface states10.1039/C5CP06669G ↗
59. Preferential orientation in hematite films for solar hydrogen production via water splitting10.1002/cvde.201004292 ↗
60. Electrical conductivity of α-Fe2O310.1143/JPSJ.15.727 ↗
61. Charge transport in metal oxides: a theoretical study of hematite α-Fe2O310.1063/1.1869492 ↗
62. Synthesis and characterization of an α-Fe2O3/ZnTe heterostructure for photocatalytic degradation of Congo red, methyl orange and methylene blue10.1039/D0RA06866G ↗
63. Optical properties of hydrothermally synthesized hematite particulate pigments10.1111/j.1551-2916.2005.00643.x ↗
64. Extremely stable bare hematite photoanode for solar water splitting10.1016/j.nanoen.2016.03.008 ↗
65. Optical absorption spectrum of hematite, αFe2O3 near IR to UV10.1016/0022-3697(80)90105-5 ↗
66. Radiation enhanced uptake of Hg0(g) on iron (oxyhydr)oxide nanoparticles10.1039/C7RA07401H ↗
67. Enhanced photoelectrochemical performance of electrodeposited hematite films decorated with nanostructured NiMnOx10.1039/C6RA03984G ↗
68. Structural evolution and characteristics of the phase transformations between α-Fe2O3, Fe3O4 and γ-Fe2O3 nanoparticles under reducing and oxidizing atmospheres10.1039/c3ce41269e ↗
69. Photoelectrochemical and impedance characteristics of specular hematite. 1. Photoelectrochemical parallel conductance, and trap rate studies10.1021/j100334a033 ↗
70. Structural, opto-electronic and photoelectrochemical properties of tin doped hematite nanoparticles for water splitting10.1016/j.mssp.2019.104873 ↗
71. Micro-Raman investigation of iron oxide films and powders produced by sol–gel syntheses10.1002/(SICI)1097-4555(199905)30:5<355::AID-JRS398>3.0.CO;2-C ↗
72. Enhanced water splitting efficiency through selective surface state removal10.1021/jz500535a ↗
73. Facile synthesis of highly photoactive α-Fe2O3-based films for water oxidation10.1021/nl202316j ↗
74. Water oxidation at hematite Photoelectrodes: the role of surface states10.1021/ja210755h ↗
75. Hematite photoelectrodes for water splitting: evaluation of the role of film thickness by impedance spectroscopy10.1039/C3CP55473B ↗
76. Hematite-based photoelectrode for solar water splitting with very high photovoltage10.1016/j.nanoen.2017.05.051 ↗