journal article·2026-07

Investigation on anti-nodule performance and pre-oxidation process optimization of laser-cladded NiCrAlY coating

Ruxue Han, Ning Wang, Mohan Dong, Chenggang Wang, Lijian Xuan, Naijin Su, Ping Chen

Publisher page

Abstract

As the critical component for transporting silicon steel strips during annealing, the furnace rollers must maintain operational stability under extreme high-temperature conditions. However, the issue of furnace roller nodule has consistently represented a latent risk to the manufacturing quality of silicon steel strips. In this study, a high‑hardness NiCrAlY anti‑nodule coating with excellent wear resistance was deposited on furnace rollers made of Cr28Ni48W5 alloy via laser cladding, followed by pre‑oxidation treatment to further optimize coating performance, thereby effectively mitigating the nodulation problem. Nodule tests were conducted in a high‑temperature tube furnace under inert atmosphere conditions. The coating properties and anti‑nodule mechanism were investigated using scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD). Results showed that the coating exhibited a 41% higher hardness (354HV) and a 43% lower wear rate (2.87 × 10⁻⁵ mm³·N⁻¹·m⁻¹) than the substrate. Additionally, a protective oxide layer composed of Cr₂O₃ and trace Al₂O₃ formed on the coating surface during nodule tests, substantially enhancing anti‑nodule performance. Systematic pre‑oxidation tests revealed that the oxide layer produced at 1000 °C for 50 h possessed the densest structure and superior anti‑nodule performance. This study elucidates the anti‑nodule performance mechanism of NiCrAlY coatings and proposes an optimized pre‑oxidation process to further improve their anti‑nodule performance. The findings offer theoretical and practical insights for anti‑nodule coating development, provide guidance for improving furnace roller surface quality, and establish a foundation for enhancing silicon steel strip quality and supporting stable production efficiency.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Mass transfer model of oriented silicon steel coil during the first soaking in annular furnace10.1007/s12633-022-01996-x ↗
2. Failure analysis of a furnace roller in continuous annealing line after long-term service at high temperatures10.1016/j.engfailanal.2019.06.087 ↗
3. Modeling approach and numerical analysis of a roller-hearth reheating furnace with radiant tubes and heating process optimization10.1016/j.csite.2021.101618 ↗
4. Simulation of temperature distribution in the oriented silicon steel coil in the heating stage of annealing process10.1016/j.applthermaleng.2018.10.121 ↗
5. Failure of a continuous-annealing furnace roller at Mobarakeh Steel Company10.1016/j.engfailanal.2007.11.004 ↗
6. Failure-analysis based redesign of furnace conveyor system components: a case study10.3390/met9080816 ↗
7. Analysis of the causes of nodule formation on furnace rollers in the soaking section of normalizing furnaces during silicon steel production: an experimental and molecular dynamics simulation study10.1016/j.engfailanal.2025.109795 ↗
8. Effect of Mn on the formation of oxide buildups upon HVOF-sprayed MCrAlY-ceramic-type cermet coatings10.1007/s11666-010-9531-y ↗
9. Scale accretion on homogenization furnace rollers in compact strip production mills and its densification mechanism10.2355/isijinternational.48.598 ↗
10. Improving the high-speed finishing of forming tools for advanced high-strength steels (AHSS)10.1007/s00170-004-2482-z ↗
11. Proposal for new hearth roller consisting of ceramic sleeve and steel shafts used in the heat treat furnace10.2355/isijinternational.ISIJINT-2015-246 ↗
12. Failure of a continuous-annealing furnace roller at Mobarakeh steel company10.1016/j.engfailanal.2007.11.004 ↗
13. Microstructure and properties of graphene reinforced co-based composite coating by laser cladding10.1016/j.surfcoat.2022.129139 ↗
14. A study of pack aluminizing process for NiCrAlY coatings using response surface methodology10.1007/s11665-013-0665-1 ↗
15. Surface modification technologies for enhancing the tribological properties of cemented carbides: a review10.1016/j.triboint.2023.108257 ↗
16. Oxidation behavior at 1100°C of NiCrAlY coatings deposited by various PVD techniques10.1016/j.surfcoat.2023.130307 ↗
17. Comparison of oxidation behavior of NiCrAlY coatings before and after surface aluminizing modification
18. Cyclic oxidation and hot-corrosion behavior of HVOF-sprayed NiCrAl coating on industrial boiler tube steels10.1007/s11837-024-06526-1 ↗
19. The oxidation properties of a NiCrAlY coating fabricated by arc ion plating10.3390/coatings13010022 ↗
20. The tribological behaviors of the NiCrAlY and NiCoCrAlYHfSi coating prepared by HVOF spraying under wide temperature range10.1016/j.surfcoat.2025.132566 ↗
21. Isothermal oxidation behaviors of NiCrAlY coatings at 1100°C
22. Microstructural characterization of laser-cladded NiCrAlY coatings on Inconel 625 Ni-based superalloy and 316L stainless steel
23. High temperature behaviour of NiCrAlY coatings made by laser cladding10.1016/j.surfcoat.2007.09.010 ↗
24. Excellent thermal shock resistance of NiCrAlY coatings on copper substrate via laser cladding10.1016/j.jmst.2022.05.011 ↗
25. Enhancing the high-temperature corrosion resistance of HVOF-sprayed NiCoCrAlY coating in marine environment by Pt modification and pre-oxidation10.1016/j.jmst.2024.02.079 ↗
26. A study of the diffusion and pre-oxidation treatment on the formation of Al₂O₃ ceramic scale on NiCrAlY bond-coat during initial oxidation process10.1016/j.ceramint.2016.01.185 ↗
27. Microstructural characteristics and oxidation behavior of low-pressure cold-sprayed CoNiCrAlY coatings10.1007/s11666-017-0631-9 ↗
28. Effect of pre-oxidation on the moderate-temperature hot corrosion behavior of CoNiCrAlY-YSZ thermal barrier coatings10.1016/j.surfcoat.2023.129947 ↗
29. Effect of pre-oxidation and sea salt on the hot corrosion behavior of MCrAlY coatings and Al–Si coatings10.1016/j.surfcoat.2023.130354 ↗
30. Investigation of the failure mechanism of thermal barrier coatings prepared by electron beam physical vapor deposition10.1016/S0257-8972(00)00693-9 ↗
31. Combined pre-annealing and pre-oxidation treatment for the processing of thermal barrier coatings on NiCoCrAlY bond coatings10.1016/j.surfcoat.2006.07.253 ↗
32. Highly oxidation resistant MCrAlY bond coats prepared by heat treatment under low oxygen content10.1016/j.surfcoat.2019.04.046 ↗
33. Heats of formation and stress–strain relationship of Fe–Cr solid solutions from a constructed Fe–Cr potential
34. Study on microstructural evolution of Fe–Cr binary alloy by mass density field coupled kinetic Monte-Carlo simulation10.7498/aps.72.20230291 ↗
35. A study of the diffusion and pre-oxidation treatment on the formation of Al₂O₃ ceramic scale on NiCrAlY bond-coat during initial oxidation process10.1016/j.ceramint.2016.01.185 ↗
36. Effects of bond coat pre-oxidation on the properties of ZrO₂-8wt.% Y₂O₃/Ni-22Cr-10Al-1Y thermal-barrier coatings10.1007/BF00662963 ↗
37. High temperature oxidation behavior of Ni–Cr alloy
38. Thermophysical properties and high temperature oxidation behavior of FeCrNiAl0.5 multi-component alloys10.1016/j.intermet.2020.106899 ↗
39. Influence of Cr-content on the local atomic structure of Fe–Cr alloy, a study using EXAFS
40. Research on the structure-activity relationship of Fe–Cr alloy in marine environment based on synchrotron radiation: effect of Cr content
41. Microstructure, wear properties and corrosion resistance of thermal sprayed FeCoCrNiBSi high-entropy amorphous coatings10.1016/j.surfcoat.2025.132341 ↗
42. Preparation and characterization of laser cladded FeCrMoBSi amorphous composite coatings10.1016/j.surfcoat.2021.127520 ↗
43. Discontinuous oxidation in wet air of T91 with a novel Al₂O₃-forming NiCrAl nanocomposite coating in as-deposited and pre-oxidized states10.1016/j.surfcoat.2022.128937 ↗
44. Controlled growth of α-Al₂O₃ nanofilm on FeCrAl alloy as an effective Cr barrier for solid oxide fuel cell (SOFC) cathode air pre-heaters10.3390/en18123055 ↗
45. Highly oxidation resistant and cost effective MCrAlY bond coats prepared by controlled atmosphere heat treatment10.1016/j.surfcoat.2018.04.068 ↗
46. Combined pre-annealing and pre-oxidation treatment for the processing of thermal barrier coatings on NiCoCrAlY bond coatings10.1016/j.surfcoat.2006.07.253 ↗
47. Effect of pre-oxidation on the steam oxidation of heat-resistant steel T9210.1515/htmp-2017-0037 ↗
48. Effects of process parameters of vacuum pre-oxidation on the microstructural evolution of CoCrAlY coating deposited by HVOF10.1016/j.jallcom.2017.11.165 ↗
49. Study on oxidation resistance and Al diffusion of Cr1-xAlx coatings with different low Al content10.1016/j.surfcoat.2023.129227 ↗