Effects of TiC and M23C6 carbides on tribological and corrosion behavior of LaC2 reinforced Ni10Cr6WFe9Ti refractory high-entropy alloy coatings prepared by laser cladding
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High Entropy Alloys Studies · Additive Manufacturing Materials and Processes · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Design of process parameters for laser cladded high entropy alloy coatings on deep ground component surface based on machine learning collaborative performance improvement10.1016/j.matchar.2026.116265 ↗
2. Failure and prevention analysis of joints and pipe bodies during the process of lifting and lowering drill pipes in ultra deep wells10.1016/j.engfailanal.2025.110274 ↗
3. Cu-induced protection of P110S steel in extreme CO2/H2S oilfield environments based on thermodynamic and kinetic models10.1016/j.matchar.2026.116256 ↗
4. A comprehensive investigation into the influence of variation in the stacking sequence on the mechanical behaviour and drilling machinability of basalt fiber-reinforced composite tubes10.1016/j.compositesb.2025.112405 ↗
5. Drill wear and its effect on surface integrity in BTA deep hole drilling of heterogeneous materials10.1016/j.wear.2026.206643 ↗
6. Multi-objective optimization for laser cladding refractory MoNbTiZr high-entropy alloy coating on Ti6Al4V10.1016/j.optlastec.2023.109220 ↗
7. Microstructure and properties of laser-cladded xSiAlON-TiZrHfNbTa composite coatings on Ti6Al4V10.1016/j.ceramint.2025.12.029 ↗
8. A review on cracking mechanism and suppression strategy of nickel-based superalloys during laser cladding10.1016/j.jallcom.2024.175164 ↗
9. Cable-stranded wire-fed laser cladding of high-aluminum lightweight high-entropy alloys
10. Effect of appropriate vibration frequency on microstructure and properties of laser cladding Co-based self-lubricating composite coatings10.1007/s40194-024-01767-9 ↗
11. Effect of laser energy density on cracking susceptibility and wear resistance of laser-clad tribaloy T-800 coatings on DD5 single-crystal alloys
12. Microstructural characterization challenges for bulk refractory high entropy alloy materials: W-Ta-Cr-V case study10.1016/j.ijrmhm.2026.107745 ↗
13. Effect of Nb content on the oxidation of NbxTiAlCrSi light-weight refractory high-entropy alloys10.1016/j.jallcom.2026.187346 ↗
14. Machine learning-driven design of refractory high-entropy alloys with high performance of hardness and corrosion resistance10.1016/j.matdes.2026.115548 ↗
15. The grain boundary wetting phenomena in the Ti-containing high-entropy alloys: a review10.3390/met11111881 ↗
16. Strengthening mechanism of laser cladding FeCoNiCrAl high-entropy alloy with different contents of SiC ceramic particles10.1016/j.ceramint.2025.04.163 ↗
17. Microstructure and wear property of (TiN + NbC) double ceramic phase-reinforced in FeCrNiCoAl high-entropy alloy coating fabricated by laser cladding10.1016/j.ceramint.2024.09.248 ↗
18. Multi-ceramic phases synergistically reinforced titanium matrix composite coating deposited by laser cladding: Effect of B4C content on the microstructure and wear properties10.1016/j.surfcoat.2024.131648 ↗
19. Straumal · 2022 · 12 · 343
20. Enhancement mechanisms of self-lubricating Ti3SiC2 ceramic doping in CoCrFeNi high-entropy alloy via high-speed laser cladding: tribology and electrochemical corrosion10.1016/j.surfcoat.2024.130554 ↗
21. Preparation of FeCoNiCrMo high entropy alloy coatings by laser cladding on Ti6Al4V surface: Evolution of columnar - equiaxed crystal transition and longitudinal comparison of mechanical properties10.1016/j.jmrt.2025.08.234 ↗
22. Influence of WC ceramic particles on structures and properties of laser cladding Ni50-WC coatings10.1016/j.jmrt.2023.07.138 ↗
23. Optimization for furnace-assisted laser cladding process parameter of crack-free ceramic-based coating by response surface methodology10.1016/j.ceramint.2025.01.027 ↗
24. The influence of grain boundary wetting on the mechanical properties of polycrystals10.1016/j.matlet.2025.139950 ↗
25. A comprehensive review on the rare earth elements improving microstructure and properties of laser cladded coatings
26. Influence of Y content on the microstructure, wear, and corrosion resistance of laser-clad SiC-reinforced high Nb-TiAl alloys10.1016/j.intermet.2025.109095 ↗
27. Effect of LaB6 doping on the microstructure, microhardness and corrosion behavior of laser cladded FeCoNiCrMo coating on Ti6Al4V10.1016/j.surfcoat.2023.129592 ↗
28. Laser-clad Y/Hf-doped AlCoCrFeNi high-entropy alloy coatings: Enhanced wear and molten aluminum corrosion resistance10.1016/j.triboint.2025.111506 ↗
29. Wear, corrosion and cavitation-erosion resistance of in-situ TiC reinforced Ti6Al4V coating on Ti6Al4V substrate via laser cladding10.1016/j.surfcoat.2026.133475 ↗
30. Effects of La content on microstructure and tribological properties of laser clad Ni60/WC/La2O3 composite coatings on Cr12MoV10.1016/j.jmrt.2024.02.034 ↗
31. Methods and techniques for enhancing wear resistance of laser cladding coatings: a comprehensive review10.1016/j.jmapro.2025.08.060 ↗
32. An enhanced deep learning framework with Large Separable Kernel Attention and Reparameterized Dual Convolution for real-time cold-crack detection in laser cladding10.1016/j.engappai.2026.114462 ↗
33. Comparative study of the microstructure and wear resistance of TiC and SiC reinforced 16MnCr5 steel laser cladding composites coating10.1016/j.jallcom.2025.184568 ↗
34. Ultrasonic-field-assisted laser cladding of TiC–TiB–Cr₂B₃-reinforced NiCrFeCoAl0.5 high-entropy alloy coatings: In-situ formation and wear behavior10.1016/j.jallcom.2025.185788 ↗
35. Core–shell NbTiC@M23C6 carbides embedded in an in-situ M2B network: A quasi-continuous protective architecture for laser-clad Fe-based composite coatings10.1016/j.surfcoat.2026.133197 ↗
36. Revealing the wear mechanism of NiTi alloy coatings with biomimetic sandwich structures by laser cladding10.1016/j.triboint.2024.109468 ↗
37. Laser-clad FeCoCrNiCu-TiC/SiC composite coatings on austenitic stainless steel: microstructure, hardness and wear resistance10.1016/j.apsusc.2025.164302 ↗
38. Effects of La content on microstructure and tribological properties of laser clad Ni60/WC/La2O3 composite coatings on Cr12MoV10.1016/j.jmrt.2024.02.034 ↗
39. Frictional wear properties of different nano La2O3 composite FeCoNiCrMo high-entropy alloy coatings under soil conditions10.1016/j.jmrt.2025.03.037 ↗
40. Controlling microstructural gradients in laser-clad AlCoCrFeNi2.1 EHEAs: the role of faceted B2 and non-faceted FCC phase growth under rapid solidification10.1016/j.surfcoat.2025.132885 ↗
41. Development of the molten pool and solidification characterization in single bead multilayer direct energy deposition
42. Multi objective optimization of forming quality and wear resistance in cross-scale Nano / Micro -WC reinforced AlCoCrFeNi2.1 high entropy alloy composite coatings in laser cladding10.1016/j.intermet.2026.109281 ↗
43. Microstructure evolution and characteristics of laser cladding with pre-placed powder lightweight refractory NbxMo0.5Ti1.5Ta0.2Cr high-entropy alloy10.1016/j.intermet.2024.108229 ↗
44. Crack defects and formation mechanism of FeCoCrNi high entropy alloy coating on TC4 titanium alloy prepared by laser cladding10.1016/j.jallcom.2022.163905 ↗
45. Wear and wear-corrosion performance of CoCrNi-based high-entropy alloys modified by Mo and C under ultrasonic-assisted laser cladding10.1016/j.surfcoat.2025.132446 ↗
46. The influence of laser energy density on the microstructure and corrosion behaviour of AlCoCrFeNi2.1 EHEA coatings by laser cladding10.1016/j.jallcom.2025.182666 ↗
47. Pitting corrosion mechanism of BCC+FCC dual-phase structured laser cladding FeCoCrNiAl0.5Ti0.5 HEAs coating10.1016/j.jallcom.2024.173643 ↗
48. Microstructure and corrosion behavior of CeO2/FeCoNiCrMo high-entropy alloy coating prepared by laser cladding10.1016/j.jallcom.2021.161826 ↗
49. Microstructure evolution and electrochemical corrosion behavior of FeCrCoNiMoB1.1Si1.2 high-entropy alloy coating via laser cladding10.1016/j.electacta.2024.145153 ↗
50. WC-TiC particle reinforced laser cladded AlCoCrFeNi2.1 eutectic high-entropy alloy coatings: microstructural refinement, in-situ phase formation and tuning of mechanical and corrosion properties10.1016/j.jallcom.2025.185109 ↗
51. Microstructure and corrosion performance of laser-clad FeCoCrNiMoCu0.8Six eutectic high-entropy alloy coatings: role of Si modification10.1016/j.apsusc.2025.165063 ↗
52. Investigation on microstructure evolution and corrosion behavior of FeCoCrNiMoCuxSi0.2 high entropy alloy coating produced by laser cladding10.1016/j.surfcoat.2025.132313 ↗
53. Metastable pitting corrosion behavior and characteristics of passive film of laser powder bed fusion produced Ti–6Al–4V in NaCl solutions with different concentrations10.1016/j.corsci.2023.111017 ↗
54. Metastable pitting corrosion behavior of laser powder bed fusion produced Ti-6Al-4V in Hank’s solution10.1016/j.corsci.2022.110333 ↗
55. Distinctive transpassivation behavior and characteristics of passive films of laser powder bed fusion produced and annealed Ti–6Al–4V in Hank’s solution10.1016/j.jmrt.2025.06.201 ↗