journal article·2026-09

Suppression of CFRP thermal damage in metal–CFRP hybrid structures via a thermal barrier coating interlayer

Baoyun Sheng, Chao Xiong, Wu Zeng, Zheng Zhang, Yakun Wu, Xue Du

Publisher page

Abstract

Introducing a thermal barrier coating (TBC) as an interlayer between metal and carbon fiber-reinforced polymer (CFRP) offers a potential route for protecting heat-sensitive CFRP in hybrid structures exposed to high temperatures. In this work, a metal–TBC–CFRP hybrid structure was designed and fabricated to investigate the thermal protection role of the TBC interlayer. A metal–CFRP structure without a TBC interlayer was prepared as a reference. Thermal exposure experiments and numerical simulations were performed to evaluate the temperature response, thermal damage evolution and residual flexural performance of the CFRP layer, and to clarify the underlying protection mechanism. The results showed that the TBC interlayer significantly delayed heat transfer into the CFRP layer and reduced both the heated-surface temperature and overall temperature level of the CFRP layer during one-sided thermal exposure. As a result, matrix degradation, pyrolysis and fiber exposure on the heated CFRP surface were effectively suppressed. After thermal exposure, the CFRP layer in the TBC-interlayer structure retained higher flexural strength than that in the conventional structure. Numerical simulations captured the main temperature evolution characteristics of both structures and showed that the TBC interlayer acts primarily by increasing through-thickness thermal resistance and reducing heat flux transmitted from the metal layer to the CFRP layer. These results reveal the thermal protection mechanism of a TBC interlayer in metal–CFRP hybrid structures and highlight its potential as a functional thermal barrier design for protecting composite constituents under high-temperature conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Advanced ceramic materials synthesis · Flame retardant materials and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Research progress on carbon-based materials for aerospace applications10.1016/j.compositesb.2025.113105 ↗
2. Effect of carbon nanotube on processing, microstructural, mechanical and ablation behavior of ZrB2-20SiC based ultra-high temperature ceramic composites10.1016/j.carbon.2016.10.002 ↗
3. Disclosing residual thermal stresses in UHT fibre-reinforced ceramic composites and their effect on mechanical behaviour and damage evolution10.1016/j.compositesb.2022.110369 ↗
4. A study of the thermomechanical behaviour of CFRP laminate using small-scale apparatus10.1016/j.compstruct.2022.116206 ↗
5. Development of fibre metal laminates for advanced aerospace structures10.1016/S0924-0136(00)00411-8 ↗
6. Joining of carbon fibre reinforced polymer (CFRP) composites and aluminium alloys – a review10.1016/j.compositesa.2017.06.007 ↗
7. Strengthening of steel structures with fiber-reinforced polymer composites10.1016/j.jcsr.2012.06.011 ↗
8. Past, present and future prospective of global carbon fibre composite developments and applications10.1016/j.compositesb.2022.110463 ↗
9. A review: Fibre metal laminates, background, bonding types and applied test methods10.1016/j.matdes.2011.03.011 ↗
10. A study of adhesive bonding in metal–metal, metal–CFRP, and CFRP–CFRP material combinations under shear deformation: Fracture morphologies and damage mechanisms10.1016/j.ijadhadh.2023.103511 ↗
11. Exit delamination at the material interface in drilling of CFRP/metal stack10.1016/j.jmapro.2022.11.058 ↗
12. Numerical simulation of bolt-bearing behavior of hybrid CFRP–steel laminates at low temperature10.1016/j.compstruct.2026.120152 ↗
13. Constitutive model and interlaminar properties of ultra-thin TA1/CFRP laminates: Numerical and experimental investigations10.1016/j.tws.2025.114303 ↗
14. Mechanical performance of mortise–tenon jointed metal–CFRP hybrid cylindrical shells under axial compression10.1016/j.tws.2025.114371 ↗
15. The crashworthiness design of metal/CFRP hybrid tubes based on origami-ending approach: Experimental research10.1016/j.compstruct.2021.114843 ↗
16. Low-velocity impact response and energy absorption of T800 CFRP/stainless-steel ultra-thin strip composite tubes10.1016/j.tws.2026.114509 ↗
17. Low-velocity impact behavior of hybrid CFRP-elastomer-metal laminates in comparison with conventional fiber-metal laminates10.1016/j.compstruct.2022.115340 ↗
18. Advanced sandwich structures for thermal protection systems in hypersonic vehicles: A review10.1016/j.compositesb.2021.109301 ↗
19. New thermal protection system using high-temperature carbon fibre-reinforced plastic sandwich panel10.1016/j.actaastro.2019.02.004 ↗
20. Development and evaluation of aerogel-filled BMI sandwich panels for thermal barrier applications10.3934/matersci.2016.3.938 ↗
21. Advances on strategies for searching for next generation thermal barrier coating materials10.1016/j.jmst.2018.11.016 ↗
22. Low thermal conductivity EB-PVD thermal barrier coatings10.4028/www.scientific.net/MSF.369-372.595 ↗
23. Porous APS YSZ TBC manufactured at high powder feed rate (100 g/min) and deposition efficiency (70%): microstructure, bond strength and thermal gradients10.1007/s11666-021-01302-y ↗
24. A review of the erosion of thermal barrier coatings10.1088/0022-3727/40/16/R01 ↗
25. Foreign object damage in a thermal barrier system: mechanisms and simulations10.1016/S0921-5093(02)00905-X ↗
26. Thermal durability and fracture behavior of layered Yb-Gd-Y-based thermal barrier coatings in thermal cyclic exposure10.1016/j.surfcoat.2016.09.032 ↗
27. Effect of thermal cycling frequency on the durability of Yb-Gd-Y-based thermal barrier coatings10.1016/j.surfcoat.2019.02.069 ↗
28. Construction of three-dimensional dynamic growth TGO (thermally grown oxide) model and stress simulation of 8YSZ thermal barrier coating10.1016/j.ceramint.2021.11.076 ↗
29. Thermal shock behaviors of YSZ thick thermal barrier coatings fabricated by suspension and atmospheric plasma spraying10.1016/j.surfcoat.2014.03.046 ↗
30. Thermal barrier coating for carbon fiber-reinforced composite materials10.1016/j.compositesb.2021.109308 ↗
31. Performance-tunable thermal barrier coating for carbon fiber-reinforced plastic composites via flame spraying10.1016/j.compositesb.2024.111842 ↗
32. 2017
33. Numerical analysis of the influence of pore microstructure on thermal conductivity and Young’s modulus of thermal barrier coating10.1016/j.ceramint.2020.06.214 ↗
34. Ochiai · 2015
35. Effects of pores and interfaces on effective properties of plasma sprayed zirconia coatings10.1016/S1359-6454(03)00390-2 ↗
36. Proposal of new expressions for effects of splat interfaces and defects on effective properties of thermal barrier coatings10.1016/j.surfcoat.2010.03.057 ↗
37. Finite element modeling of the elastic modulus of thermal barrier coatings10.1016/j.surfcoat.2012.05.031 ↗
38. Modelling behaviour of a carbon epoxy composite exposed to fire: Part I—characterisation of thermophysical properties
39. Effect of phenolic resin pyrolysis on thermal properties of SiFRP composites under high heating rates10.1088/1742-6596/2891/11/112023 ↗
40. Components of thermal protection mechanism of carbon/phenolic composites exposed to severe aerodynamic heat10.1002/pc.27032 ↗
41. Thermal response and pyrolysis behavior of carbon fiber/phthalonitrile composites under one-sided butane flame heating: Experimental and numerical analysis10.1016/j.compositesa.2023.107788 ↗
42. Bergman · 2011
43. Simulation study of heat flow coupling of thermal barrier coatings based on virtual coating technology10.1088/1742-6596/2650/1/012033 ↗
44. Steady-state heat conduction in multilayer bodies: An analytical solution and simplification of the eigenvalue problem10.1016/j.ijheatmasstransfer.2013.08.070 ↗
45. Analytical exact solutions of heat conduction problems for anisotropic multi-layered media10.1016/j.ijheatmasstransfer.2003.10.022 ↗
46. A Model for the Thermal Response of Polymer Composite Materials with Experimental Verification10.1177/002199838501900608 ↗
47. A numerical study of the thermally-induced response of decomposing, expanding polymer composites10.1007/BF01377253 ↗
48. A Mathematical Model to Predict the Thermal Response of Decomposing, Expanding Polymer Composites10.1177/002199838702100406 ↗
49. Ranjbar-Far M, Absi J, Shahidi S, Mariaux G. Impact of the non-homogenous temperature distribution and the coatings process modeling on the thermal barrier coatings system. Mater. Des. n.d.;32:728–735. doi:https://doi.org/10.1016/j.matdes.2010.07.034.10.1016/j.matdes.2010.07.034 ↗
50. Study on strength of composite lap structures under thermal mechanical coupling
51. Progressive damage study of composite countersunk head bolt lap structures under thermal mechanical coupling
52. Thermo–mechanical coupling effects on mechanical properties and damage evolution of continuous fiber-reinforced thermoplastic composites10.1016/j.compositesb.2025.112788 ↗
53. Mechanical properties and constitutive relationships of 30CrMnSiA steel heated at high rate10.1016/j.msea.2006.09.132 ↗