Tribological wear behavior of thermal-sprayed AlCoCr2FeMo0.5Ni-Zrx high-entropy alloy coatings
Source abstract
Abstract
The exceptional mechanical and thermal characteristics of high-entropy alloys (HEAs) have attracted substantial attention; however, their potential as protective coatings continues to be a major focus of ongoing research. This study examines the influence of zirconium (Zr) addition on the microstructural evolution, and the mechanical and tribological performance of flame-sprayed AlCoCr 2 FeMo 0.5 Ni-Zrₓ (x = 5, 10, and 15 wt%) coatings synthesized on SS 316 L substrates. Mechanical properties were evaluated via microhardness testing, while tribological behavior was assessed through multi-pass scratch wear experiments. Phase analysis revealed a dominant body-centred cubic (BCC) solid-solution phase, along with secondary phases such as ZrO₂, Cr₂O₃, and spinel oxide. The incorporating Zr significantly improved the coating hardness, with AlCoCr 2 FeMo 0.5 Ni-Zr 5 (585 HV 0.3 ), AlCoCr 2 FeMo 0.5 Ni-Zr 10 (720 HV 0.3 ), and AlCoCr 2 FeMo 0.5 Ni-Zr 15 (907 HV 0.3 ) exhibiting microhardness values ~3.7, 4.6, and 5.7 times higher than that of SS 316 L (158 HV 0.3 ), respectively, owing to the combined contributions of solid-solution strengthening and ZrO 2 -induced oxide dispersion hardening. Among the coatings, AlCoCr 2 FeMo 0.5 Ni-Zr 10 exhibited the lowest coefficient of friction (COF) of 0.11 the minimum specific wear rate of 4.48 × 10 −3 mm 3 /N·m, with reductions of 68.3% in COF and 72.5% in specific wear rate compared to uncoated SS 316 L. The superior performance was attributed to a well-balanced combination of hardness and toughness, reflected by high H / E and H 3 / E 2 ratios. These findings demonstrate that Zr-modified AlCoCr 2 FeMo 0.5 Ni HEA coatings deposited via flame spraying exhibit enhanced multi-pass scratch wear resistance, providing new insights into the design of wear-resistant HEA coatings for industrial applications involving severe sliding and abrasive environments.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: High Entropy Alloys Studies · High-Temperature Coating Behaviors · Additive Manufacturing Materials and Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (70)
Show source-provided references
1. Computational analysis of wind-turbine blade rain erosion10.1016/j.compfluid.2016.08.013 ↗
2. Application of the ring-on-ring test for abrasive wear modeling of rolling undercarriage components in track-type machines10.1016/j.wear.2003.12.003 ↗
3. A comprehensive review of solid particle erosion modeling for oil and gas wells and pipelines applications10.1016/j.jngse.2014.10.001 ↗
4. Corrosion-fatigue failure of gas-turbine blades in an oil and gas production plant10.3390/ma13040900 ↗
5. Laser-deposited CoCrFeNiTiAlx high-entropy alloy coatings featuring balanced wear and corrosion resistance10.1016/j.intermet.2025.109004 ↗
6. Effects of hydrogen on the fretting wear behavior of laser cladded FeCoCrNiMo0.2 high entropy alloy coating10.1016/j.wear.2024.205587 ↗
7. Microstructure and properties of plasma-sprayed AlCoCrFeNi high-entropy alloy coatings via CeO2 doping10.1016/j.jmrt.2025.08.268 ↗
8. Microstructural, mechanical and wear behavior of HVOF and cold-sprayed high-entropy alloys (HEAs) coatings10.1007/s11666-021-01293-w ↗
9. Electrochemical behavior of flame-sprayed Sc-doped AlCoCrFeMo high-entropy alloy coatings in 3.5% sodium chloride solution10.1002/adem.70870 ↗
10. Structure and high temperature wear characteristics of CVD coating on HEA-bonded cermet10.1016/j.ceramint.2019.06.152 ↗
11. The effect of laser ablation on the corrosion behavior, morphology and wettability of TiAlCrSiZr coating deposited by PVD10.1016/j.jmrt.2025.04.284 ↗
12. Electroplating of wear- and corrosion-resistant CrCoNi medium-entropy alloys beyond hard chromium coatings10.1002/adfm.202418621 ↗
13. Effect of Si and Al content on wear resistance and soft magnetic properties of laser cladding FeCoNiSixAlx HEA coatings10.1016/j.matlet.2026.140384 ↗
14. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
15. Fundamental deformation behavior in high-entropy alloys: an overview10.1016/j.cossms.2017.08.003 ↗
16. Research progress on BCC solid solution type high entropy hydrogen storage alloys10.1016/j.ijhydene.2026.153792 ↗
17. Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0218-9 ↗
18. Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0. 5Fe alloy with boron addition10.1007/s11661-004-0254-x ↗
19. On the elemental effect of AlCoCrCuFeNi high-entropy alloy system10.1016/j.matlet.2006.03.140 ↗
20. Microstructure characterization of AlxCoCrCuFeNi high-entropy alloy system with multiprincipal elements10.1007/s11661-005-0283-0 ↗
21. Influence of Y (yttrium) doping on thermal stability of nanocrystalline AlCoCrCuFeNi high entropy alloy10.1016/j.intermet.2025.108638 ↗
22. On the superior hot hardness and softening resistance of AlCoCrxFeMo0.5Ni high-entropy alloys10.1016/j.msea.2011.01.072 ↗
23. Effect of microstructure on wear and corrosion performance of thermally sprayed AlCoCrFeMo high-entropy alloy coatings10.1002/adem.202101713 ↗
24. Corrosion behavior of passivation layer Cr2O3 of uncoated stainless steel under the anodic and cathodic conditions: a first-principles study10.1016/j.cej.2024.152658 ↗
25. Effects of Ti, Mo, Nb, and ta doping on the microstructure, wear behavior, and high-temperature oxidation resistance of laser cladded Al0.3CoCrFeNi high-entropy alloy coatings10.1016/j.surfcoat.2026.133339 ↗
26. Effect of Nb and Ti additions on microstructure, hardness and wear properties of AlCoCrFeNi high-entropy alloy10.1016/j.jallcom.2024.177117 ↗
27. Contribution of Sc doping to the growth and adhesion of alumina scale on AlCoCrFeNi high-entropy alloy10.1016/j.scriptamat.2024.116272 ↗
28. Role of yttrium addition and annealing temperature on thermal stability and hardness of nanocrystalline CoCrFeNi high entropy alloy10.1016/j.intermet.2022.107589 ↗
29. Y-Hf co-doped AlCoCrFeNi high-entropy alloy coating with superior oxidation and spallation resistance at 1100°C10.1016/j.corsci.2021.109267 ↗
30. Effect of Si addition on microstructure and wear behavior of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding10.1016/j.surfcoat.2020.126522 ↗
31. The influence of Zr in the AlCrMoNbZr high-entropy alloy on the mechanical strength and corrosion resistance as a nuclear fuel cladding material10.1016/j.net.2026.104287 ↗
32. The effect of Zr addition on melting temperature, microstructure, recrystallization and mechanical properties of a cantor high entropy alloy10.3390/ma14205994 ↗
33. The effect of zirconium on the microstructure and properties of cast AlCoCrFeNi2.1 eutectic high-entropy alloy10.3390/ma17235938 ↗
34. Effect of synergistic variation in Ti and Zr elements on the microstructure and properties of laser cladding AlCoCrFeNi high-entropy alloy coatings10.1016/j.matchar.2023.113300 ↗
35. Performance evaluation of thermally sprayed Zr-added high entropy alloy coatings10.1016/j.surfcoat.2025.132882 ↗
36. Quantitative evaluation of critical cooling rate for metallic glasses10.1016/S0921-5093(00)01446-5 ↗
37. Phase stability in high entropy alloys: formation of solid-solution phase or amorphous phase10.1016/S1002-0071(12)60080-X ↗
38. Effect of tungsten and vanadium additions on the dry abrasive wear and solid particle erosion of flame-sprayed AlCoCrFeMo high entropy alloy coatings10.1016/j.ijrmhm.2023.106245 ↗
39. Substitutional effect of copper on the cation distribution in cobalt chromium ferrites and their structural and magnetic properties10.1515/msp-2018-0011 ↗
40. Synthesis and characterisation of copper II hydroxide nanoparticles10.5101/nbe.v5i3.p116-120 ↗
41. ASTM E1920–03 · 2021
42. ASTM E384-17 · 2017
43. ASTM C1327 · 2019
44. Improving high-temperature tribological characteristics on nanocomposite CrAlSiN coating by Mo doping10.1016/j.surfcoat.2018.03.086 ↗
45. Influence of WC particle on the metallurgical, mechanical, and corrosion behavior of AlFeCuCrCoNi-WC x high-entropy alloy coatings10.1007/s11665-021-05523-8 ↗
46. Toward understanding the microstructure and electrical resistivity of thermal-sprayed high-entropy alloy coatings10.1007/s10853-022-07921-2 ↗
47. From powders to thermally sprayed coatings10.1007/s11666-009-9435-x ↗
48. Enhanced wear resistance of AlCoCrFeMo high entropy coatings (HECs) through various thermal spray techniques10.1016/j.surfcoat.2023.130311 ↗
49. Wear and erosion performance of flame sprayed rare earth element-doped AlCoCrFeMo high entropy alloy coatings10.1016/j.wear.2025.205773 ↗
50. High-entropy alloy coatings deposited by thermal spraying: a review of strengthening mechanisms, performance assessments and perspectives on future applications
51. Role of scandium in mechanical alloying of AlCoCrFeMo high-entropy alloy powders for flame spray coating deposition10.1016/j.powtec.2025.121837 ↗
52. Microstructure and properties analysis of AlCoCrFeNi high-entropy alloy/iron-based amorphous composite coatings prepared by laser cladding10.1016/j.jnoncrysol.2023.122732 ↗
53. Microstructures and properties of high-entropy alloys10.1016/j.pmatsci.2013.10.001 ↗
54. Effect of ZrO2 particles on the nanomechanical properties and wear behavior of AlCoCrFeNi–ZrO2 high entropy alloy composites10.1016/j.wear.2021.204032 ↗
55. Development of wear-resistant dual-phase high-entropy alloys enhanced by C15 laves phase10.1016/j.matchar.2023.112879 ↗
56. Correlation between nanoindentation and tensile properties: influence of the indentation size effect10.1016/S0921-5093(03)00563-X ↗
57. Additive manufacturing of defect-free TiZrNbTa refractory high-entropy alloy with enhanced elastic isotropy via in-situ alloying of elemental powders10.1038/s43246-024-00452-0 ↗
58. Microstructures and properties of an equimolar AlCoCrFeNi high entropy alloy printed by selective laser melting10.1016/j.intermet.2018.10.018 ↗
59. Effect of the high temperature phase transition on the tribological behavior of atmospheric plasma sprayed AlCoCrFeNi-Bi2O3 coating10.1016/j.surfcoat.2023.130286 ↗
60. Effects of hBN content and particle size on microstructure, mechanical and tribological properties of NiCr-Cr3C2-hBN coatings10.1016/j.surfcoat.2023.130330 ↗
61. Commentary on using H/E and H3/E2 as proxies for fracture toughness of hard coatings10.1016/j.tsf.2019.04.040 ↗
62. Influence of scanning speed on the microstructure, nanoindentation characteristics and tribological behavior of novel maraging steel coatings by laser cladding10.1016/j.matchar.2023.113335 ↗
63. Erosive wear resistance evaluation with the hardness after strain-hardening and its application for a high-entropy alloy10.1016/j.wear.2017.12.006 ↗
64. Laser surface alloying of FeCoCrAlNiTi high entropy alloy composite coatings reinforced with TiC on 304 stainless steel to enhance wear behavior10.1016/j.ceramint.2022.04.049 ↗
65. Research on microstructure, mechanical property and wear mechanism of AlCoCrFeNi/WC composite coating fabricated by HVOF10.1016/j.triboint.2024.110149 ↗
66. Comparative study of tribomechanical properties of HiPIMS with positive pulses DLC coatings on different tools steels10.3390/coatings11010028 ↗
67. Low-frequency conductivity of low wear high-entropy alloys10.1038/s41467-024-49035-0 ↗
68. The influence of the H/E ratio on wear resistance of coating systems – insights from small-scale testing10.1016/j.surfcoat.2022.128272 ↗
69. Effect of mechanical and thermochemical tool steel substrate pre-treatment on diamond-like carbon (DLC) coating durability10.1016/j.surfcoat.2021.127483 ↗
70. Dry sliding friction and wear behavior of HVOF sprayed FeCrMnCoNi high entropy coatings (HECs) at room and elevated temperatures10.1016/j.surfcoat.2025.132138 ↗