High-temperature sliding wear behaviour of HVOF-sprayed TiC-based hardmetals with HEA matrices
Source abstract
Abstract
The present research aims to develop coating materials for sliding wear protection over a wide temperature range. Indeed, while hardmetal coatings deposited by thermal spraying are widely used to mitigate sliding wear, the conventional formulations face limitations. WC-based materials are not applicable above 400 °C, while Cr 3 C 2 -NiCr, despite its oxidation resistance, has good but not optimal wear resistance. Thus, in this work we explored TiC-based hardmetals with Cu- and/or Mo-containing high-entropy alloy (HEA) matrices as an alternative. We coated AISI 304 stainless steel plates with High Velocity Oxy-Fuel (HVOF)-sprayed hardmetals containing 60 vol% TiC in four different AlCuCrFeNi or Al( Cu )CrFeMoNi HEA matrices. All the coatings were 250–300 μm thick and very dense (porosity <1 vol%), with ~800–860 HV hardness and a largely FCC matrix. In dry sliding ball-on-disc tests against Al 2 O 3 , TiC-HEA coatings showed lower wear than a Cr 3 C 2 -NiCr benchmark at all temperatures (room temperature, 400 °C, 600 °C, and 800 °C). In particular, the specific wear rates of Mo-containing HEAs exhibited rather stable values ≤3 × 10 −6 mm 3 /(N·m), whilst those of Cr 3 C 2 -NiCr increased gradually from ~2 × 10 −5 at room temperature to ~4 × 10 −5 mm 3 /(N·m) at 800 °C. The wear resistance of the Mo-based HEAs relied on the formation of continuous titanate- and molybdate-rich films by tribo-oxidation at 400 and 600 °C. At 800 °C, the TiC-HEA coatings formed a thick oxide scale and wear proceeded by abrasion and spallation of the scale itself, without affecting the underlying hardmetal. Overall, TiC-HEA hardmetal coatings emerge as interesting options for high-temperature sliding wear resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced materials and composites · Metal and Thin Film Mechanics · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Application of hardmetals as thermal spray coatings10.1016/j.ijrmhm.2014.09.029 ↗
2. Comparative study of the dry sliding wear behaviour of HVOF-sprayed WC–(W,Cr)2C–Ni and WC–CoCr hardmetal coatings10.1016/j.wear.2013.11.001 ↗
3. Tribology of HVOF- and HVAF-sprayed WC–10Co4Cr hardmetal coatings: a comparative assessment10.1016/j.surfcoat.2015.01.048 ↗
4. High temperature erosion-oxidation of Cr3C2-NiCr thermal spray coatings under simulated turbine conditions10.1016/j.corsci.2013.01.030 ↗
5. High temperature erosion of Cr3C2-NiCr thermal spray coatings - the role of phase microstructure10.1016/j.surfcoat.2008.10.008 ↗
6. The role of microstructure in the mechanism of high velocity erosion of Cr3C2-NiCr thermal spray coatings: part 2 - heat treated coatings10.1016/j.surfcoat.2008.10.005 ↗
7. Thermally induced metallurgical processes in Cr3C2-NiCr thermal spray coatings as a function of carbide dissolution10.1016/j.jallcom.2017.08.246 ↗
8. Long-term compositional/microstructural development of Cr3C2-NiCr coatings at 500°C, 700°C and 900°C10.1016/j.ijrmhm.2016.05.010 ↗
9. HVOF coating case study for power plant process control ball valve application10.1007/s11666-013-9978-8 ↗
10. Sliding wear behaviour of HVOF and HVAF sprayed Cr3C2-based coatings10.1016/j.wear.2017.04.001 ↗
11. Influence of feedstock powder characteristics and spray processes on microstructure and properties of WC-(W,Cr)2C-Ni hardmetal coatings10.1016/j.surfcoat.2010.07.032 ↗
12. Improving the high temperature abrasion resistance of thermally sprayed Cr3C2-NiCr coatings by WC addition10.1016/j.surfcoat.2018.01.035 ↗
13. Grohol · 2023
14. Properties of HVOF-sprayed TiC-FeCrAl coatings10.1016/j.wear.2018.11.002 ↗
15. Corrosion and wear performances of alternative TiC-based thermal spray coatings10.1016/j.surfcoat.2022.128400 ↗
16. TiC–NiCr thermal spray coatings as an alternative to WC-CoCr and Cr3C2–NiCr
17. Friction and wear properties of (Ti,Mo)(C,N) hardmetal coatings prepared by gas and liquid fuel HVOF processes
18. Investigation of novel vacuum plasma-sprayed (Ti,Mo)C-NiCo coatings10.1007/BF00264113 ↗
19. Dry sliding up to 7.5m/s and 800 °C of thermally sprayed coatings of the TiO2–Cr2O3 system and (Ti,Mo)(C,N)–Ni(Co)10.1016/j.wear.2008.12.105 ↗
20. HVOF deposition of TiC-based hardmetal coatings with High-Entropy Alloy (HEA) matrix10.1016/j.surfcoat.2025.132386 ↗
21. Tribological properties of high-entropy alloys under dry conditions for a wide temperature range—a review10.3390/ma14195814 ↗
22. Tribological properties of high-entropy alloys: a review10.1007/s12613-021-2373-4 ↗
23. High-entropy alloys as an alternative binder to improve mechanical, tribological, and oxidation properties of cermets10.1016/j.matdes.2024.113431 ↗
24. High-temperature wear and oxidation resistance of laser clad AlCoCrFeNiMo0.8-TiC composite coatings10.1007/s10853-025-11549-3 ↗
25. Effect of Cu-doping on tribological properties of laser-cladded FeCoCrNiCux high-entropy alloy coatings10.1016/j.triboint.2023.108868 ↗
26. FeCrMnVSix high entropy alloy coatings with improved high temperature tribological properties via synergistic effect of in situ-formed SiO2 and bimetallic oxides10.1016/j.triboint.2023.108980 ↗
27. Influence of laser power on microstructure and high-temperature tribological properties of CoAlTiWTa RHEA coating on Inconel 718 superalloy10.1016/j.surfcoat.2024.130573 ↗
28. A review on wear, corrosion, and wear-corrosion synergy of high entropy alloys10.1016/j.heliyon.2024.e25867 ↗
29. Development and exploration of refractory high entropy alloys - a review10.1557/jmr.2018.153 ↗
30. Self-lubricating Ni-based composite coating with core-shell structured Mo@ag@Ni addition: tribological behaviors and interface evolution over multi-thermal cycles
31. Tribological properties of adaptive NiCrAlY–Ag–Mo coatings prepared by atmospheric plasma spraying10.1016/j.surfcoat.2013.08.012 ↗
32. HVOF-sprayed adaptive low friction NiMoAl–Ag coating for tribological application from 20 to 800°C10.1007/s11249-014-0382-4 ↗
33. Microstructure and tribological property of HVOF-sprayed adaptive NiMoAl–Cr3C2–Ag composite coating from 20°C to 800°C10.1016/j.surfcoat.2014.07.012 ↗
34. Preparation and characterizations of nickel-based composite coatings with self-lubricating property at elevated temperatures10.1016/j.surfcoat.2016.03.060 ↗
35. Influence of heat treatments on the microstructure as well as mechanical and tribological properties of NiCrAlY-Mo-Ag coatings10.1016/j.jallcom.2016.06.075 ↗
36. Microstructural and tribological characterization of NiAl matrix self-lubricating composite coatings by atmospheric plasma spraying10.1016/j.triboint.2017.01.031 ↗
37. Formation mechanism of the lubrication film on the plasma sprayed NiCoCrAlY-Cr2O3-AgMo coating at high temperatures10.1016/j.surfcoat.2017.03.065 ↗
38. Microstructure, mechanical and tribological properties of plasma-sprayed NiCrAlY-Mo-Ag coatings from conventional and nanostructured powders10.1016/j.surfcoat.2017.06.034 ↗
39. Tribological properties of copper molybdate powder solid lubricants under high temperature conditions10.2474/trol.10.127 ↗
40. Analyzing the tribology of high-entropy alloys prepared by spark plasma sintering10.3390/met14010027 ↗
41. Tailoring Cu, Mn, Al, and Mo to enhance high-temperature wear resistance of CoCrFeNi coatings: unraveling lubrication mechanisms via first-principles calculations10.1016/j.triboint.2025.111195 ↗
42. Wear-resistant coatings
43. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
44. Prediction of enthalpy of mixing of binary alloys based on machine learning and CALPHAD assessments10.3390/met15050480 ↗
45. High-entropy alloy: challenges and prospects10.1016/j.mattod.2015.11.026 ↗
46. Designing high entropy alloys employing thermodynamics and Gaussian process statistical analysis10.1016/j.matdes.2016.11.049 ↗
47. Multicomponent high-entropy Cantor alloys10.1016/j.pmatsci.2020.100754 ↗
48. Overview: recent studies of machine learning in phase prediction of high entropy alloys10.1007/s42864-022-00175-0 ↗
49. Novel frontiers in high-entropy alloys10.3390/met13071193 ↗
50. Corrigendum to ‘electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems’ [Acta Materialia 75 (2014) 297–306]10.1016/j.actamat.2014.08.004 ↗
51. Electronic and thermodynamic criteria for the occurrence of high entropy alloys in metallic systems10.1016/j.actamat.2014.04.033 ↗
52. Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys10.1063/1.3587228 ↗
53. Wear resistance of HVOF- and HVAF-sprayed (Ti,Mo)(C,N)–Ni coatings from an agglomerated and sintered powder
54. Larson · 2004
55. EXPGUI, a graphical user interface for GSAS10.1107/S0021889801002242 ↗
56. Crystallography Open Database (COD): an open-access collection of crystal structures and platform for world-wide collaboration10.1093/nar/gkr900 ↗
57. Deposition of High-Entropy Alloy (HEA) coatings by HVOF and cold gas spray10.1016/j.jallcom.2025.183050 ↗
58. Recent Progress in bulk glassy alloys10.2320/matertrans.43.1892 ↗
59. Dominant effect of carbide rebounding on the carbon loss during high velocity oxy-fuel spraying of Cr3C2-NiCr10.1016/S0040-6090(02)00708-3 ↗
60. Sliding and abrasive wear behaviour of HVOF- and HVAF-sprayed Cr3C2–NiCr hardmetal coatings10.1016/j.wear.2016.03.034 ↗
61. Wear mechanisms
62. On the vibrational spectra and structure of FeCrO3 and of the ilmenite-type compounds CoTiO3 and NiTiO310.1006/jssc.1994.1256 ↗
63. Lamellar copper molybdate as a novel photocatalyst for the degradation of Rhodamine B10.1016/j.matlet.2024.136821 ↗
64. Layered atomic structures of double oxides for low shear strength at high temperatures10.1016/j.scriptamat.2010.02.004 ↗
65. Lubricious oxide coatings for extreme temperature applications: a review10.1016/j.surfcoat.2014.05.064 ↗
66. Hard coatings with high temperature adaptive lubrication and contact thermal management: review10.1016/j.surfcoat.2014.04.046 ↗