journal article·2026-09

Magnesium alloy composite coatings based on micro-arc oxidation with corrosion inhibitor loading and layer-by-layer assembly: Enhanced corrosion resistance and active protection

Qinyang Ma, Guanzhen Mu, Jing Chen, Wenjia Wang, Xinyi Li, Longxu Liu, Yan Dong, Xin Liu

Publisher page

Abstract

A composite coating integrating micro-arc oxidation (MAO), corrosion inhibitor loading, and layer-by-layer (LBL) assembly was fabricated on AZ91D magnesium alloy. Three inhibitors—sodium fumarate, sodium 2,6-pyridinedicarboxylate, and sodium benzoate—were individually loaded into the porous MAO layer via a vacuum-assisted method. Subsequently, a chitosan/sodium alginate LBL coating was deposited by spin-coating to seal surface defects and retard premature inhibitor release. Structural and morphological characterizations confirmed successful inhibitor loading and uniform LBL coverage. Electrochemical measurements revealed that the composite coating exhibited a low-frequency impedance modulus of 107 Ω·cm2 and a corrosion current density of 10-10 A·cm-2, which were significantly superior to those of the pristine MAO layer. Long-term immersion tests demonstrated that the composite coatings remained intact after 10 days. Moreover, the scratched composite coatings exhibited superior corrosion resistance to the inhibitor-free control, and the localized corrosion products contained inhibitor-derived elements, confirming active corrosion inhibition. Collectively, the developed composite coating provides both effective physical barrier protection and active corrosion inhibition, significantly enhancing the corrosion resistance of magnesium alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition · Nanoporous metals and alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. The recrystallization mechanism and its effects on texture in pre-twinned AZ31 magnesium alloy during medium-high temperature impact loading10.1016/j.jma.2025.04.023 ↗
2. Surface characterization and corrosion behavior of calcium phosphate (Ca-P) base composite layer on Mg and its alloys using plasma electrolytic oxidation (PEO): a review10.1016/j.jma.2020.07.004 ↗
3. Impressive strides in amelioration of corrosion and wear behaviors of Mg alloys using applied polymer coatings on PEO porous coatings: a review10.1016/j.jma.2022.01.015 ↗
4. Alloying design and microstructural control strategies towards developing Mg alloys with enhanced ductility10.1016/j.jma.2022.04.002 ↗
5. Study on mechanical properties of AZ91 magnesium alloy10.1016/j.matpr.2021.09.171 ↗
6. Durable lubricant-infused coating on a magnesium alloy substrate with anti-biofouling and anti-corrosion properties and excellent thermally assisted healing ability10.1039/C9NR10699E ↗
7. Formation of protective conversion coating on Mg surface by inorganic inhibitor10.1016/j.corsci.2023.111044 ↗
8. Aqueous molybdate provides effective corrosion inhibition of WE43 magnesium alloy in sodium chloride solutions10.1016/j.corsci.2021.109664 ↗
9. Recent progress in surface modification of metals coated by plasma electrolytic oxidation: principle, structure, and performance10.1016/j.pmatsci.2020.100735 ↗
10. Effect of particles addition to solution of plasma electrolytic oxidation (PEO) on the properties of PEO coatings formed on magnesium and its alloys: a review10.1016/j.jma.2020.05.001 ↗
11. Maximizing the potential applications of plasma electrolytic oxidation coatings produced on Mg-based alloys in anti-corrosion, antibacterial, and photocatalytic targeting through harnessing the LDH/PEO dual structure10.1016/j.jma.2024.07.002 ↗
12. A simple strategy to modify the porous structure of plasma electrolytic oxidation coatings on magnesium10.1039/C5RA20647B ↗
13. Effects of TiC particles on tribological and corrosion resistance of PEO coating on TC4 alloy10.1016/j.corcom.2023.10.002 ↗
14. The effect of electrolytic solution composition on the structure, corrosion, and wear resistance of PEO coatings on AZ31 magnesium alloy10.3390/coatings10100937 ↗
15. Enhancing corrosion resistance of MAO coatings on Al alloy LY12 through in situ co-doping with zinc phosphate and cerium phosphate10.1016/j.corcom.2024.10.001 ↗
16. Enhancing corrosion and wear performance of PEO coatings on Mg alloys using graphene and graphene oxide additions: a review10.1016/j.flatc.2021.100241 ↗
17. Protective properties of inhibitor-containing composite coatings on a Mg alloy10.1016/j.corsci.2015.10.026 ↗
18. Flash-PEO as an alternative to chromate conversion coatings for corrosion protection of Mg alloy10.1016/j.corsci.2020.109189 ↗
19. In vitro degradation, photo-activated antibacterial activity of sodium copper chlorophyllin crosslinked-polysilane composite coating on magnesium alloys10.1016/j.corcom.2024.07.003 ↗
20. Fabrication of superhydrophobic coating on magnesium alloy with improved corrosion resistance by combining micro-arc oxidation and cyclic assembly10.1016/j.surfcoat.2018.02.001 ↗
21. New method for the corrosion resistance of AZ31 Mg alloy with a porous micro-arc oxidation membrane as an ionic corrosion inhibitor container10.1021/acs.langmuir.8b01637 ↗
22. Development of self-healing coatings based on PDA@BTA@MOF active fillers for low-temperature corrosion protection
23. A layer-by-layer approach to natural polymer-derived bioactive coatings on magnesium alloys☆10.1016/j.actbio.2013.05.013 ↗
24. In vitro and in vivo degradation and mechanical properties of ZEK100 magnesium alloy coated with alginate, chitosan and mechano-growth factor10.1016/j.msec.2016.02.073 ↗
25. Microstructure and corrosion behavior of Ca/P coatings prepared on magnesium by plasma electrolytic oxidation10.1016/j.surfcoat.2017.04.001 ↗
26. Comprehensive screening of Mg corrosion inhibitors10.1016/j.corsci.2017.07.011 ↗
27. Self-sealing micro-arc oxidation coating on AZ91D Mg alloy and its formation mechanism10.1016/j.surfcoat.2014.09.071 ↗
28. Polyethylenimine/kappa carrageenan: micro-arc oxidation coating for passivation of magnesium alloy10.1016/j.carbpol.2017.03.025 ↗
29. Smart composite antibacterial coatings with active corrosion protection of magnesium alloys10.1016/j.jma.2022.05.002 ↗
30. The synthesis and characterization of iron(II) fumarate and its inclusion complexes with cyclodextrins
31. New silver(I) pyridinecarboxylate complexes: synthesis, characterization, and antimicrobial therapeutic potential10.1080/00958972.2014.906588 ↗
32. Microphase separation upon crystallization of small amphiphilic molecules: ‘low’ temperature form II of sodium benzoate (E 211)10.1039/C6CE01281G ↗
33. In situ surface film evolution during Mg aqueous corrosion in presence of selected carboxylates10.1016/j.corsci.2020.108484 ↗
34. Power of infrared and raman spectroscopies to characterize metal-organic frameworks and investigate their interaction with guest molecules10.1021/acs.chemrev.0c00487 ↗
35. Green corrosion inhibitors intercalated Mg:Al layered double hydroxide coatings to protect Mg alloy10.1007/s12598-020-01538-7 ↗
36. Characterization and properties of sodium alginate from brown algae used as an ecofriendly superabsorbent10.1088/1757-899X/188/1/012019 ↗
37. Physicochemical characterization of chitin and chitosan producted from Parapenaeus longirostris shrimp shell wastes
38. Synthesis of chitosan /alginate/ silver nanoparticles hydrogel scaffold
39. FTIR and rheology study of alginate samples: effect of radiation10.1016/j.radphyschem.2022.110500 ↗
40. Novel morphology-controlled magnetic hollow mesoporous Fe3O4 nanocarriers for inhibitor release10.5006/4510 ↗
41. Investigation of process and properties of Cu-Mn-Al alloy cladding deposited on 27SiMn steel via cold metal transfer10.3390/cryst15100858 ↗
42. Electroplated Ni/Cu/Ni coatings on sintered Nd-Fe-B magnets: influence of layer structure on the anti-corrosion, magnetic and mechanical properties10.1016/j.apsusc.2026.166871 ↗
43. The corrosion response of the heterogeneous nitriding structure originated from the laser additive manufactured steel10.1016/j.corsci.2023.111188 ↗
44. Structure and properties of super-hard (MoSiTiVZr)N high-entropy nitride coatings regulated by substrate bias10.1016/j.surfcoat.2025.131788 ↗
45. Insight into synergistic corrosion inhibition of 3-amino-1,2,4-triazole-5-thiol (ATT) and NaF on magnesium alloy: experimental and theoretical approaches10.1016/j.corsci.2022.110618 ↗
46. Active protection of Mg alloy by composite PEO coating loaded with corrosion inhibitors10.1016/j.apsusc.2019.144462 ↗
47. pH-responsive chitosan/alginate polyelectrolyte complexes on electrospun PLGA nanofibers for controlled drug release
48. Polyelectrolyte complex formation using alginate and chitosan10.1016/j.carbpol.2008.04.048 ↗
49. Efficient and smart hybrid coatings for active corrosion protection of magnesium alloys10.1016/j.jma.2025.07.017 ↗
50. Corrosion resistance and mechanisms of smart micro-arc oxidation/epoxy resin coatings on AZ31 Mg alloy: strategic positioning of nanocontainers10.1016/j.jma.2022.12.013 ↗
51. Synergistic effect of graphene oxide/ ternary Mg-Al-La layered double hydroxide for dual self-healing corrosion protection of micro-arc oxide coating of magnesium alloy10.1016/j.colsurfa.2022.130339 ↗
52. Enhanced corrosion protection for MAO coating on magnesium alloy by the synergism of LDH doping with deposition of 8HQ inhibitor film10.1016/j.ceramint.2023.06.261 ↗
53. Synergistic effect of hydrophobic film and porous MAO membrane containing alkynol inhibitor for enhanced corrosion resistance of magnesium alloy10.1016/j.surfcoat.2018.10.054 ↗
54. Fabrication and corrosion performance evaluation of LDHs@ZIF-67 composite coatings based on magnesium alloys AZ3110.1016/j.surfcoat.2024.131551 ↗
55. Functionalization of plasma electrolytic oxidation/sol–gel coatings on AZ31 with organic corrosion inhibitors10.3390/coatings14010084 ↗
56. Effective PEO/Silane pretreatment of epoxy coating applied on AZ31B Mg alloy for corrosion protection10.1016/j.corsci.2020.108608 ↗