journal article·2026-09

Effectiveness of AlTiN, TiN, and AlTiN/TiN coatings for enhanced tribo-mechanical and machining performance of cutting tool fabricated by additive manufacturing

Pritam Patra, Sagar Sarkar

Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced machining processes and optimization · Surface Treatment and Residual Stress

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Potentials of additive manufacturing for cutting tools: a review of scientific and industrial applications10.3390/met14090982 ↗
2. Review on 3D printing techniques for cutting tools with cooling channels
3. Additively manufactured milling tools for enhanced efficiency in cutting applications
4. Dimensional accuracy of internal cooling channel made by selective laser melting (SLM) And direct metal laser sintering (DMLS) processes in fabrication of internally cooled cutting tools
5. The effectiveness of additive SLM-technologies in the manufacture of cutting tools10.1016/j.matpr.2019.07.055 ↗
6. Additive manufacturing of WC-Co hardmetals: a review10.1007/s00170-020-05389-5 ↗
7. Additive manufacturing of WC-Co cemented carbides: process, microstructure, and mechanical properties
8. Laser-based additive manufacturing of WC–Co with high-temperature powder bed preheating10.1002/srin.201900511 ↗
9. Additive manufacturing of WC-Co specimens with internal channels10.3390/ma16113907 ↗
10. Optimization of parameters for SLS of WC-Co10.1108/RPJ-10-2016-0168 ↗
11. The assessment of the transversal rupture strength (TRS) and hardness of WC-Co specimens made via additive manufacturing and sinter-HIP10.3390/met13061051 ↗
12. Additive manufacturing of metal-bonded grinding tools10.1007/s00170-020-05199-9 ↗
13. Development and performance of additively manufactured tungsten carbide tool insert: an application of additive manufacturing towards flexible and customized machining10.1016/j.triboint.2024.109780 ↗
14. Microstructure and properties of FeCrMoVC tool steel produced by selective laser melting10.1016/j.matdes.2015.09.148 ↗
15. Additive manufacturing of indexable inserts: new possibilities for more effective cooling10.2507/32nd.daaam.proceedings.057 ↗
16. First demonstration of additive manufacturing of cutting tools using directed energy deposition system: Stellite™-based cutting tools
17. Influence of post heat treatment on microstructure, texture, and mechanical properties of 18Ni-300 maraging steel fabricated by using LPBF technique10.1007/s40964-023-00530-8 ↗
18. High power laser powder bed fusion of 18Ni300 maraging steel: processing optimization, microstructure and mechanical properties10.1016/j.msea.2022.143983 ↗
19. High-temperature exposure of the high-strength 18Ni-300 maraging steel manufactured by laser powder bed fusion: oxidation, structure and mechanical changes10.1007/s10853-024-10102-y ↗
20. Geometry, structure and surface quality of a maraging steel milling cutter printed by direct metal laser melting10.3390/ma15030773 ↗
21. Additively manufactured milling tool with focused cutting fluid supply10.1016/j.procir.2019.03.118 ↗
22. CFD simulation to optimize the internal coolant channels of an additively manufactured milling tool10.1016/j.procir.2021.09.040 ↗
23. Characterization of 3D metal printed cutting tool with transpiration cooling channels
24. Towards additively manufacturing excavating tools for future robotic space exploration
25. Study of wear performance and tribological characterization of AlTiN PVD coatings with different Al/Ti ratios during ultra-high speed turning of stainless steel 30410.1016/j.ijrmhm.2021.105488 ↗
26. Tribological properties and cutting performance of AlTiN coatings with various geometric structures10.3390/coatings13020402 ↗
27. Scratch behavior of AlTiN/TiN nanolayer and TiAlSiN/TiSiN/TiAlN multilayer nanocomposite coatings deposited on different substrates
28. Characterization and experimental evaluation of PVD AlTiN and TiN/TiAlN coatings for dry turning of DSS220510.1007/s40430-022-03775-6 ↗
29. Characterization and corrosion behaviors of TiN/TiAlN multilayer coatings by ion source enhanced hybrid arc ion plating10.1016/j.surfcoat.2019.03.027 ↗
30. Characterization and performance of AlTiN, AlTiCrN, TiN/TiAlN PVD coated carbide tools while turning SS 30410.1080/10426914.2014.984217 ↗
31. Friction-wear behaviors of cathodic arc ion plating AlTiN coatings at high temperatures10.1016/j.triboint.2015.03.009 ↗
32. Comparative assessment between AlTiN and AlTiSiN coated carbide tools towards machinability improvement of AISI D6 steel in dry hard turning10.1177/09544062211037373 ↗
33. Investigation on anisotropic behavior of additively manufactured maraging steel during orthogonal cutting10.1016/j.procir.2022.09.162 ↗
34. Measurement of hardness and elastic modulus by instrumented indentation: advances in understanding and refinements to methodology10.1557/jmr.2004.19.1.3 ↗
35. Microstructural evolution and mechanical properties of maraging steel by additive manufacturing10.1016/j.msea.2024.147201 ↗
36. Study on the micro-abrasion wear behavior of PVD hard coating under different SiC abrasive particles/distilled water ratios10.3390/ma16082939 ↗
37. Investigation of the wear behavior of PVD coated carbide tools during Ti6Al4V machining with intensive built up edge formation10.3390/coatings11030266 ↗
38. Mechanical and tribological characterization of TiAlN/TiN and TiSiN/AlTiN coating systems for cutting tools10.1016/j.jmapro.2025.04.086 ↗
39. Microhardness and microstructure analysis of the LPBF additively manufactured 18Ni30010.3390/ma17030661 ↗
40. Effect of scan strategies on the tribological properties of maraging steel manufactured by PBF-LB
41. Surface roughness and its effect on adhesion and tribological performance of magnetron sputtered nitride coatings10.3390/coatings14081010 ↗
42. The search for novel, superhard materials10.1116/1.581977 ↗
43. Coating optimisation for high speed machining with advanced nanomechanical test methods10.1016/j.surfcoat.2009.01.025 ↗
44. Toughness evaluation of thin hard coatings and films
45. Toughness evaluation of hard coatings and thin films10.1016/j.tsf.2011.09.036 ↗
46. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
47. Study of cracking mechanisms in multi-layered composite nano-structured coatings10.1016/j.wear.2017.01.101 ↗
48. Hard and superhard nanocomposite coatings10.1016/S0257-8972(99)00586-1 ↗
49. The influence of the H/E ratio on wear resistance of coating systems–insights from small-scale testing10.1016/j.surfcoat.2022.128272 ↗
50. Contact and rubbing of flat surfaces10.1063/1.1721448 ↗
51. Holmberg · 2009 · 56
52. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour10.1016/S0043-1648(00)00488-9 ↗
53. Physical and mechanical properties to characterize tribological compatibility of Heavily Loaded Tribosystems (HLTS)
54. Microstructure and mechanical properties of cathodic arc ion-plated (Al, Ti) N coatings10.1016/S0257-8972(02)00610-2 ↗
55. Elastic and plastic work of indentation as a characteristic of wear behavior for cutting tools with nitride PVD coatings10.1016/j.tsf.2004.07.038 ↗
56. Comparative investigation and characterization of the scratch and wear resistance behavior of TiN, CrN, AlTiN and AlCrN cathodic arc PVD coatings10.1007/s13369-019-04038-8 ↗
57. Jennett · 2002
58. Friction behavior in nanoscratching of reaction bonded silicon carbide ceramic with Berkovich and sphere indenters10.1016/j.triboint.2016.01.013 ↗
59. Shaw · 2005
60. The effects of aging on machinability of 6061 aluminium alloy10.1016/j.matdes.2008.08.007 ↗
61. A SEM and EDS insight into the BUL and BUE differences in the turning processes of AA2024 Al–Cu alloy10.1016/S0890-6955(01)00112-2 ↗
62. Stephenson · 2018
63. Research on chip formation parameters of aluminum alloy 6061-T6 based on high-speed orthogonal cutting model10.1007/s00170-014-5700-3 ↗
64. The effects of chamfered and honed tool edge geometry in machining of three aluminum alloys10.1016/j.ijmachtools.2004.12.003 ↗
65. Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys10.1016/j.wear.2012.12.001 ↗
66. Wear performance investigation of PVD coated and uncoated carbide tools during high-speed machining of TiAl6V4 aerospace alloy
67. Fundamental investigation into tool wear and surface quality in high-speed machining of Ti6Al4V alloy10.3390/ma14237128 ↗
68. Investigating the influence of built-up edge on forces and surface roughness in micro scale orthogonal machining of titanium alloy Ti6Al4V10.1016/j.jmatprotec.2016.04.010 ↗