Immersion corrosion and adhesion behaviors of Hastelloy C276 and Inconel 625 thermal spray coatings with Ni-based bond coatings
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: High-Temperature Coating Behaviors · High Entropy Alloys Studies · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (84)
Show source-provided references
1. The Steel Construction Institute · 2017
2. Corrosion behaviour of 304 stainless steel in sulphuric acid solutions and its inhibition by some substituted pyrazolones10.1016/S0254-0584(03)00367-5 ↗
3. The effect of salt loading on chloride-induced stress corrosion cracking of 304L austenitic stainless steel under atmospheric conditions10.1016/j.mtla.2019.100509 ↗
4. Microstructural and electrochemical characterization of Ni-based bi-layer coatings produced by the HVAF process10.1016/j.surfcoat.2016.07.080 ↗
5. Comparative study on the corrosion performance of APS-, HVOF-, and HVAF-sprayed NiCr and NiCrBSi coatings in NaCl solutions10.1007/s11666-022-01389-x ↗
6. Immersion studies of Al2O3–13% TiO2 and Cr2O3 coatings on ship hull plate in simulated seawater environment in laboratory10.1016/j.matpr.2021.05.677 ↗
7. Thakur · 2021
8. Independent control of HVOF particle velocity and temperature10.1361/105996302770349005 ↗
9. Surface modification by HVOF coating of micron-sized WC-metal powder and laser-heating of the coating10.4028/www.scientific.net/MSF.686.654 ↗
10. HVOF coating of Inconel 625 onto stainless and carbon steel surfaces: corrosion and bond testing10.1016/j.jmatprotec.2004.04.146 ↗
11. Analysis of wire arc spraying process variables on coatings properties10.1016/j.jmatprotec.2005.04.019 ↗
12. Corrosion behavior of wire-arc-sprayed stainless steel coating on mild steel10.1361/105996306X124446 ↗
13. Influence of coating microstructure on the corrosion behavior of Inconel 625 coatings fabricated by different thermal spraying processes10.1016/j.surfcoat.2024.130674 ↗
14. Mechanisms of oxidation and its role in microstructural evolution of metallic thermal spray coatings—case study for Ni-Al10.1016/j.surfcoat.2005.07.072 ↗
15. A study on corrosion behaviors of Ni–Cr–Mo laser coating, 316 stainless steel and X70 steel in simulated solutions with H2S and CO210.1016/j.surfcoat.2016.02.017 ↗
16. Microstructural evolution of cold-sprayed Inconel 625 superalloy coatings on low alloy steel substrate10.1016/j.actamat.2017.02.070 ↗
17. Erosion corrosion behaviour and mechanical properties of wire arc sprayed Ni-Cr and Ni-Al coating on boiler steels in a real boiler environment10.1080/09603409.2020.1810922 ↗
18. The contribution of Cr and Mo to the passivation of Ni22Cr and Ni22Cr10Mo alloys in sulfuric acid10.1016/j.corsci.2020.109015 ↗
19. Corrosion behaviors of single-layer and double-layer nickel alloy coatings fabricated by arc spraying and high-velocity oxy-fuel10.1016/j.surfcoat.2024.130877 ↗
20. Corrosion behavior of heat-treated NiCrMoAl alloy coatings produced via arc spraying
21. Davis · 2000
22. Atomic emission spectroelectrochemistry applied to dealloying phenomena II. Selective dissolution of iron and chromium during active–passive cycles of an austenitic stainless steel10.1016/j.electacta.2009.08.028 ↗
23. The role of alloyed molybdenum in the inhibition of pitting corrosion in stainless steels10.1016/S0010-938X(00)00086-X ↗
24. An effective approach for creating metallurgical self-bonding in plasma-spraying of NiCr-Mo coating by designing shell-core structured powders10.1016/j.actamat.2016.03.020 ↗
25. Performance of corrosion resistant arc spray coatings as a function of spray parameters
26. Corrosion properties of thermally sprayed bond coatings under plasma-sprayed chromia coating in sulfuric acid solutions10.1007/s11666-019-00922-9 ↗
27. Study on salt spray corrosion of Ni–graphite abradable coating with 80Ni20Al and 96NiCr–4Al as bonding layers10.1016/j.surfcoat.2011.03.007 ↗
28. Nickel-chromium plasma spray coatings: a way to enhance degradation resistance of boiler tube steels in boiler environment10.1361/105996306X92695 ↗
29. Corrosion behaviours of arc-sprayed AlSi-based amorphous/nanocrystalline coating
30. Electrochemical evaluation of corrosion resistance of NiCrBSi coatings deposited by HVOF10.1016/j.surfcoat.2003.09.053 ↗
31. Corrosion behavior of Ni-based coating containing spherical tungsten carbides in hydrochloric acid solution10.1007/s42243-019-00240-y ↗
32. Effect of powder particle size and spray parameters on the Ni/Al reaction during plasma spraying of Ni-Al composite powders10.1007/s11666-020-01150-2 ↗
33. Role of thermal spray processing method on the microstructure, residual stress and properties of coatings: an integrated study for Ni-5 wt.%Al bond coats10.1016/j.msea.2003.08.023 ↗
34. Effect of thermal spray on the microstructure and adhesive strength of high-velocity oxy-fuel-sprayed Ni-Cr coatings on 9Cr-1Mo steel10.1007/s11661-004-0063-2 ↗
35. Adhesion improvements of thermal barrier coatings with HVOF thermally sprayed bond coats10.1016/j.surfcoat.2006.10.005 ↗
36. Adhesion strength of HVOF sprayed In718 coatings10.1007/s11666-011-9689-y ↗
37. Investigation of tensile fracture mechanism of Fe-based coatings deposited on different substrates by arc spraying
38. The effect of metallic bonding layer on the corrosion behavior of plasma sprayed Al2O3 ceramic coatings in simulated seawater10.1016/j.vacuum.2013.07.039 ↗
39. Surface properties and tensile bond strength of HVOF thermal spray coatings of WC-co powder onto the surface of 420J2 steel and the bond coats of Ni, NiCr, and Ni/NiCr10.1016/j.surfcoat.2009.04.003 ↗
40. Investigation of abradable seal coating performance using scratch testing10.1016/j.surfcoat.2007.07.076 ↗
41. Effect of Ni bond coat on adhesive properties of Fe coating thermal sprayed on Al substrate10.3740/MRSK.2016.26.10.542 ↗
42. Electrochemical corrosion behavior and microstructural characterization of HVOF sprayed Inconel-718 coating on gray cast iron10.1007/s11668-020-01057-8 ↗
43. On the interplay between adhesion strength and tensile properties of thermal spray coated laminates—part I: high velocity thermal spray coatings10.1007/s11666-018-0695-1 ↗
44. Thermal spray: current status and future trends10.1557/mrs2000.119 ↗
45. Corrosion and wear behaviour of HVOF spraying WC-12% Ni coating on gray cast-iron
46. High temperature chlorine-induced corrosion of Ni50Cr coating: HVOLF, HVOGF, cold spray and laser cladding10.1016/j.surfcoat.2018.01.025 ↗
47. Electrochemical behavior of thermally sprayed stainless steel coatings in 3.4% NaCl solution10.1016/j.corsci.2004.07.003 ↗
48. Corrosion behavior in seawater of arc thermal sprayed Inconel 625 coatings with sealing treatment10.1016/j.surfcoat.2017.03.009 ↗
49. Modelling route for abradable coatings10.1016/j.surfcoat.2005.11.105 ↗
50. Electrochemical behaviour of cermet coatings with a bond coat on Al7075: pseudopassivity, localized corrosion and galvanic effect considerations in a saline environment10.1016/j.corsci.2010.04.010 ↗
51. Corrosion study on Ni-based alloy in acidic environment10.1088/1757-899X/611/1/012008 ↗
52. Effects of molybdenum on the composition and nanoscale morphology of passivated austenitic stainless steel surfaces10.1039/C4FD00231H ↗
53. The influence of chromium and molybdenum on the repassivation of nickel-chromium-molybdenum alloys in saline solutions10.1002/sia.6254 ↗
54. Advances in corrosion-resistant thermal spray coatings for renewable energy power plants. Part I: effect of composition and microstructure10.1007/s11666-019-00938-1 ↗
55. Microstructural evolution and nanoindentation of NiCrMoAl alloy coating deposited by arc spraying10.1016/j.surfcoat.2020.125565 ↗
56. The effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed Inconel 62510.1016/j.surfcoat.2009.12.028 ↗
57. AEETHER
58. Machinemfg
59. Effects of coating thickness and residual stresses on the bond strength of ASTM C633-79 thermal spray coating test specimens10.1007/BF02658982 ↗
60. Peening action and residual stresses in high-velocity oxygen fuel thermal spraying of 316L stainless steel10.1361/105996301770349457 ↗
61. Sobolev · 2004
62. Parameter optimization of HVOF sprayed nanostructured alumina and alumina-nickel composite coatings10.1016/j.surfcoat.2005.05.018 ↗
63. Microstructure, mechanical properties, and adhesion in IN625 air plasma sprayed coatings10.1016/j.msea.2005.10.003 ↗
64. Investigation of particle flattening behavior and bonding mechanisms of APS sprayed coatings on magnesium alloys10.1016/j.surfcoat.2006.11.034 ↗
65. Residual stresses and adhesion of thermal spray coatings10.1179/174329405X30020 ↗
66. Influence of spray gun parameters on inflight particle's characteristics, the splat-type distribution, and microstructure of plasma sprayed YSZ coatings10.1016/j.surfcoat.2020.126705 ↗
67. Optimizing HVOF spray parameters to maximize bonding strength of WC-CrC-Ni coatings on AISI 304L stainless steel10.1007/s11666-014-0091-4 ↗
68. Effect of particle state on the adhesive strength of HVOF sprayed metallic coating10.1361/105996302770348655 ↗
69. Capture and evaluation of HVOF thermal sprayed particles by a gel targent
70. Instrumented spherical micro-indentation of plasma-sprayed coatings10.1016/S0921-5093(01)01252-7 ↗
71. Oxidation of wire HVOF-sprayed steel10.1361/105996398770350765 ↗
72. Substrate melting during thermal spray splat quenching10.1016/j.tsf.2004.05.073 ↗
73. Influence of coating thickness and substrate on stresses and mechanical properties of (Ti,Al,Ta)N/(Al,Cr)N multilayers10.1016/j.surfcoat.2018.04.060 ↗
74. Development of cold spray nanostructured Ni-20Cr coatings for high temperature applications
75. A study on the cyclic oxidation behavior of detonation-gun-sprayed Ni-5Al coatings on Inconel-718 at 900 °C10.1007/s11665-014-1240-0 ↗
76. ESPI Metals
77. Virgamet
78. Vinmay
79. Tribological behaviors of arc sprayed NiCrMoAl alloy coating after heat treatments10.1016/j.surfcoat.2022.128325 ↗
80. On the surface preparation of nickel superalloys before CoNiCrAlY deposition by thermal spray10.1016/j.surfcoat.2003.10.135 ↗
81. Evaluation of adhesion/cohesion bond strength of the thick plasma spray coatings by scratch testing on coatings cross-sections10.1016/j.triboint.2011.04.002 ↗
82. A critical analysis of the tensile adhesion test for thermally sprayed coatings10.1007/s11666-022-01468-z ↗
83. Integrity of APS, HVOF and HVAF sprayed NiCr and NiCrBSi coatings based on the tensile stress-strain response10.1016/j.surfcoat.2022.129068 ↗
84. Tribological and microstructural properties of carbon steel coatings fabricated by wire arc spray10.1007/s12540-019-00354-8 ↗