journal article·2024-03

Parametric study on surface modification of Al-7075 alloy using electric discharge coating

Bhargab M Barua, Maneswar Rahang

Surface Engineering· Volume 40· Issue 3
Publisher page

Abstract

This work investigates the surface modification of Al-7075 alloy using a copper-multi-walled carbon nanotube powder metallurgical green compact tool in the electric discharge coating process. The effect of input parameters such as compact load, peak current ( I p ), and pulse on-time ( T on ) on material deposition rate and surface roughness ( R a ) has been investigated. The process parameters are optimised using the teaching learning-based optimisation algorithm. Maximum material deposition rate of 0.62 mg/min with minimum R a of 3.00 µm has been achieved at compact load of 6 tons, I p of 2.5 A, and T on of 1000 µs. The field emission scanning electron microscopy images show smooth surface generation at low I p and compact load settings. Characterisation using different techniques confirms the presence of tool materials on the modified surface. The microhardness test of the modified surface exhibits a higher hardness value of 2.70 times than that of the substrate material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Machining and Optimization Techniques · Additive Manufacturing and 3D Printing Technologies · Electrodeposition and Electroless Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, National Institute of Technology Meghalaya, Shillong, India

References (35)

Show source-provided references
1. 10.1080/10426914.2020.176525310.1080/10426914.2020.1765253 ↗
2. 10.1016/j.apsusc.2015.10.14510.1016/j.apsusc.2015.10.145 ↗
3. 10.1080/10426914.2015.103792110.1080/10426914.2015.1037921 ↗
4. 10.1080/10426914.2019.159425910.1080/10426914.2019.1594259 ↗
5. 10.1080/10426914.2019.166979810.1080/10426914.2019.1669798 ↗
6. Madhab Barua B, Rahang M. Surface modification of Al-7075 using Cu-CNT green tool in EDM. Surf Eng 2022: 1–10.
7. 10.1007/s12046-023-02207-y10.1007/s12046-023-02207-y ↗
8. 10.1016/j.surfin.2017.02.00110.1016/j.surfin.2017.02.001 ↗
9. 10.1016/j.prostr.2019.05.01610.1016/j.prostr.2019.05.016 ↗
10. 10.4028/www.scientific.net/AMM.889.11510.4028/www.scientific.net/AMM.889.115 ↗
11. 10.1080/02670844.2023.223325610.1080/02670844.2023.2233256 ↗
12. 10.1080/02670844.2022.214845210.1080/02670844.2022.2148452 ↗
13. 10.1080/17515831.2023.222964310.1080/17515831.2023.2229643 ↗
14. 10.1080/02670844.2021.190051810.1080/02670844.2021.1900518 ↗
15. 10.1080/02670844.2019.161574410.1080/02670844.2019.1615744 ↗
16. Rahang M, Patowari PK. Selective area deposition for pattern generation in EDM using masking technique. Surf Rev Lett 2020; 1950218: 1–16.
17. 10.1016/j.triboint.2021.10689710.1016/j.triboint.2021.106897 ↗
18. 10.1016/j.ceramint.2021.03.26210.1016/j.ceramint.2021.03.262 ↗
19. 10.1007/s13369-018-3491-910.1007/s13369-018-3491-9 ↗
20. 10.1080/10426914.2020.176221110.1080/10426914.2020.1762211 ↗
21. 10.1142/S0218625X2150073610.1142/S0218625X21500736 ↗
22. 10.1007/s00521-021-05844-810.1007/s00521-021-05844-8 ↗
23. 10.1016/j.apm.2012.03.04310.1016/j.apm.2012.03.043 ↗
24. Raza I, Hussain M, Khan AN, et al. Properties of light weight multi walled carbon nano tubes (MWCNTs) nano-composites. Int J Light Mater Manuf 2021; 4: 195–202.
25. 10.1016/j.ceramint.2020.03.13610.1016/j.ceramint.2020.03.136 ↗
26. 10.1080/02670844.2022.207807610.1080/02670844.2022.2078076 ↗
27. Rao RV, Kalyankar VD. Multi-pass turning process parameter optimization using teaching-learning-based optimization algorithm. Sci Iran 2013; 20: 967–974.
28. 10.1142/S0218625X2250141410.1142/S0218625X22501414 ↗
29. Mazarbhuiya RM, Rahang M. Experimental analysis of surface integrity in electro-discharge coating process. Surf Eng 2024: 02670844231221528.
30. 10.1080/02670844.2022.204463410.1080/02670844.2022.2044634 ↗
31. 10.1080/10426914.2019.160517910.1080/10426914.2019.1605179 ↗
32. 10.1016/j.surfin.2017.07.00110.1016/j.surfin.2017.07.001 ↗
33. 10.1080/10426914.2019.166698810.1080/10426914.2019.1666988 ↗
34. 10.1080/10426914.2023.219590710.1080/10426914.2023.2195907 ↗
35. Biswas A, Das SK, Sahoo P. Effect of copper incorporation on phase transformation behavior of electroless nickel–phosphorous coating and its effect on the tribological behavior. Proc Inst Mech Eng Part L J Mater Des Appl 2021; 235: 898–916.