journal article·1987-01

Effect of Plasma Nitriding Temperature on Surface Properties of Austenitic Stainless Steel

E. Roliński

Surface Engineering· Volume 3· Issue 1
Publisher page

Abstract

A chromium–nickel austenitic stainless steel was plasma nitrided at 535, 585, 650, 735, and 785°C. After nitriding, the structure, thickness, and hardness of the surface layer, as well as the appearance and height of surface irregularities, were determined. The wear and corrosion resistance of the nitrided steels were tested and the percentage of magnetic phases present was determined. It has been established that nitriding markedly raises the wear resistance of the steel at pressures of 50, 200, and 400 MPa. The corrosion resistance of the steel in 0.05 M Na2SO4 at pH 3 decreases as a result of nitriding. Nitriding leads to the appearance of a multi phase structure in the surface layer, the proportion of the ferromagnetic a and γ’ phases being dependant on nitriding temperature. After nitriding at 785°C the proportion of these phases is minimal. At the same time, the steel has a high hardness and wear resistance and is susceptible to passivation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Coatings · Material Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Institute of Materials Science and Engineering, Warsaw Technical University, Warsaw, Poland.

References (11)

Show source-provided references
1. vanrrLE R. D. T. · Met. Technol. · 1984 · 11 · 231
2. 10.1179/sur.1985.1.2.13110.1179/sur.1985.1.2.131 ↗
3. LEHRUN J. P. · Sci. Rev. Métall. · 1972 · 69 · 727
4. 10.1179/sur.1985.1.2.12510.1179/sur.1985.1.2.125 ↗
5. 10.1179/sur.1986.2.1.3510.1179/sur.1986.2.1.35 ↗
6. BEKKER I. E. · Zavod. Lab. · 1948 · 14 · 77
7. SENATORSKI J. · Biul. IMP · 1970 · 92 · 36
8. Polish Standard PN-83/H-04302, 1983.
9. MANKOWSKI J., ROLINSKI L., and is J.: in ‘Corrosion andcorrosion protection’, 27, 35; 1985, Szklarska Porqba, Technical University of Wroclaw.
10. MARSHALL P.: Austenitic stainless steels’, 378; 1984, London, New York, Elsevier.
11. SAMSONOV G. W. ‘Nitridy’, 193, 214; 1969, Kiev, Naukova Dumka.