journal article·2020-02-01

Frictional performance evaluation of sliding surfaces lubricated by zinc - oxide nano-additives

Ahmed Elagouz, Mohamed Kamal Ahmed Ali, Hou Xianjun, Mohamed A. A. Abdelkareem, Mohamed A. Hassan

Surface Engineering· Volume 36· Issue 2
Publisher page

Abstract

Automobile engines consume more than 30% of fuel energy as frictional power waste. Therefore, this paper investigated the tribological properties of ZnO nanoparticles (NPs) as a nano-additive to improve the wear and friction trends of the piston ring/cylinder liner interface, especially in boundary lubrication. This improvement occurs due to the formation of a solid tribofilm layer on the sliding surfaces that acts as an indirect coating to help separate and protect the worn pairs. Tribological experiments were carried out under different speeds and loading circumstances using a ring-on-liner reciprocating test bench. The surface morphologies of the tested samples were analysed using EPMA, FE-SEM, a 3D surface profilometer and XPS to illustrate the key mechanisms of the ZnO nano-additives. The tribotest results show that the coefficient of friction and specific wear rate of the ring were reduced by 20–23% and 43–88%, respectively, using the ZnO nano-additives compared with the reference oil.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Lubricants and Their Additives · Tribology and Lubrication Engineering · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Hubei Key Laboratory of Advanced Technology for Automotive Components, Wuhan University of Technology, Wuhan, People’s Republic of China

Automotive and Tractors Engineering Department, Faculty of Engineering, Minia University, El-Minia, Egypt

Hubei Collaborative Innovation Center for Automotive Components Technology, Wuhan, People’s Republic of China

Funding

National Natural Science Foundation of China · Wuhan University of Technology · Chinese Scholarship Council · Minia University

References (40)

Show source-provided references
1. 10.1515/ntrev-2015-003110.1515/ntrev-2015-0031 ↗
2. Katafuchi T. Diesel engine oil composition. U.S. Patent No. 6,159,911. 2000 Dec 12.
3. 10.1021/acsami.7b0671410.1021/acsami.7b06714 ↗
4. 10.1016/j.apenergy.2017.11.01310.1016/j.apenergy.2017.11.013 ↗
5. 10.1039/C6RA10042B10.1039/C6RA10042B ↗
6. Aldana PU. Tungsten disulfide nanoparticles as lubricant additives for the automotive industry [PhD dissertation]. Université de Lyon; 2016.
7. Bhaumik S · Tribol Ind · 2015 · 37 · 196
8. 10.1115/1.403972010.1115/1.4039720 ↗
9. 10.1016/j.wear.2016.08.00510.1016/j.wear.2016.08.005 ↗
10. 10.1016/j.triboint.2016.10.01310.1016/j.triboint.2016.10.013 ↗
11. 10.1016/j.triboint.2016.08.01110.1016/j.triboint.2016.08.011 ↗
12. 10.1007/s11249-014-0405-110.1007/s11249-014-0405-1 ↗
13. Jianhua Q · China Pet Process Petrochem Technol · 2011 · 13 · 14
14. 10.1080/10402004.2012.74014810.1080/10402004.2012.740148 ↗
15. Hsien WLY. · 201510.1007/978-981-287-266-1 ↗
16. 10.1016/j.wear.2005.10.00110.1016/j.wear.2005.10.001 ↗
17. Stachowiak GW, Batchelor AW. Adhesion and adhesive wear. Boston: Engineering Tribology, Butterworth-Heinemann, ABD; 2001; p. 533–553.10.1016/B978-075067836-0/50013-4 ↗
18. 10.1088/2051-672X/ab0ea110.1088/2051-672X/ab0ea1 ↗
19. 10.1016/S0921-5093(01)01937-210.1016/S0921-5093(01)01937-2 ↗
20. 10.1007/s11249-019-1183-610.1007/s11249-019-1183-6 ↗
21. 10.1016/j.ceramint.2008.02.02210.1016/j.ceramint.2008.02.022 ↗
22. 10.1016/j.apsusc.2015.06.10710.1016/j.apsusc.2015.06.107 ↗
23. 10.1016/S0043-1648(96)07448-010.1016/S0043-1648(96)07448-0 ↗
24. 10.1016/j.porgcoat.2008.07.02310.1016/j.porgcoat.2008.07.023 ↗
25. 10.1016/j.msec.2018.10.06610.1016/j.msec.2018.10.066 ↗
26. 10.1007/978-1-4757-6639-4_810.1007/978-1-4757-6639-4_8 ↗
27. ASTM Standard G181-11, Standard test method for conducting friction tests of piston ring and cylinder liner materials under lubricated conditions. 03.02 (2004).
28. 10.1115/1.400669010.1115/1.4006690 ↗
29. 10.1016/j.triboint.2018.04.00410.1016/j.triboint.2018.04.004 ↗
30. Hamrock BJ · 1981
31. 10.1007/978-1-4614-1945-710.1007/978-1-4614-1945-7 ↗
32. 10.1016/j.triboint.2004.08.00310.1016/j.triboint.2004.08.003 ↗
33. 10.1016/S1872-5813(07)60016-410.1016/S1872-5813(07)60016-4 ↗
34. 10.1063/1.315599910.1063/1.3155999 ↗
35. Ali MKA · Proc Inst Mech Eng Part K J Multi-body Dyn · 2016 · 230 · 329
36. 10.1007/s11051-016-3679-410.1007/s11051-016-3679-4 ↗
37. 10.1039/C6RA10543B10.1039/C6RA10543B ↗
38. 10.1021/acsami.8b2010310.1021/acsami.8b20103 ↗
39. 10.1016/j.polymertesting.2018.03.04910.1016/j.polymertesting.2018.03.049 ↗
40. 10.1016/j.jallcom.2015.01.28510.1016/j.jallcom.2015.01.285 ↗