journal article·2002-12

Solutions to improve surface hardness of stainless steels without loss of corrosion resistance

L. Poirier, Y. Corre, J. P. Lebrun

Surface Engineering· Volume 18· Issue 6
Publisher page

Abstract

Ion nitriding is an extensively industrialised process enabling steel surfaces to be hardened by nitrogen diffusion, with a resulting increase in wear, seizure and fatigue resistance. Unfortunately, its direct application to stainless steels, while enhancing their mechanical properties, also causes a marked degradation in their corrosion resistance. By adapting the plasma process however, it is possible to reconcile improvement of tribological properties with maintenance of corrosion resistance. This may be obtained by working with base nitrogen and/or base carbon plasmas. The material properties obtained with a nitrogen plasma are discussed, using, as an example, the application of this process to the control rod clusters of pressurised water nuclear reactors (PWR). This nitriding process is then compared with low temperature nitriding and/or carburising thermionically enhanced low pressure plasma processes which have been recently developed. Following this type of treatment it is possible to increase the wear rate resistance of austenitic stainless steels by 60 to 700 times, while fully conserving the corrosion resistance of the untreated alloy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Plasma Diagnostics and Applications · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

L. Poirier (poirier@nitruvid.com) and J. P. Lebrun are with Nitruvid, 9 rue J. Poulmarch F ± 95100 Argenteuil, France and Y. Corre is with Nitruvid, Usine du parc, Rue de l-Ondaine, F ± 42490 Fraisses, France

References (11)

Show source-provided references
1. HERTZ D. · 1993
2. BILLON B., and HENDRY A.: IoP Conf. Proc. 68, 367; 1983, Bristol, IoP Publishing.
3. HANNULA S. P., NENONEN P., and MOLARIUS J.: Proc. Conf. HNS 88, 266; 1989, London, Institute of Metals.
4. ICHII K. · Technol. Rep. Kansal Univ · 1986 · 27 · 134
5. LEBRUN J. P.: PhD thesis, IPNL, Nancy, France, 1971.
6. 10.1179/sur.1985.1.2.13110.1179/sur.1985.1.2.131 ↗
7. 10.1016/0036-9748(86)90445-X10.1016/0036-9748(86)90445-X ↗
8. KAWAKAMI M. · High Temp. Mat. Processes · 1989 · 8 · 4
9. HERTZ D. · J. High Temp. Chem. Processes · 1992 · 1 · 77
10. HERTZ D. · 1993
11. 1996