journal article·2001-04

Joint Second Prize Significance of Y and Cr in TiAlN Hard Coatings for Dry High Speed Cutting

M.I. Lembke, D.B. Lewis, Münz W.-D., J.M. Titchmarsh

Surface Engineering· Volume 17· Issue 2
Publisher page

Abstract

High speed cutting of die steels (A2, HRC58, 15 000 rev min-1, 385 m min-1) demands high wear and oxidation resistant and extremely well adherent coatings. PVD is the preferred deposition technique to tailor a coating for this application. With the development of TiAlN based hard coatings, an important step in the direction of improved cutting performance has been achieved. TiAlCrYN is a state of the art coating, which has proven to be very successful in demanding dry high speed cutting operations. A special feature of this coating is a double layered overcoat consisting of a lower fine multilayered TiAlYN/CrN with a periodicity of 1·6 nm graded into an upper glassy amorphous TiAlY oxynitride. The incorporation of Y leads to an enhanced oxidation resistance, whereas the most important effect of the double layered overcoat is the reduction of the friction coefficient. To confirm the beneficial effects of Y and Cr, sophisticated TEM has been employed with an X-ray resolution of approxi mately 3 nm. Segregation of Y and other elements in this system (tool/coating) were detected along the column boundaries in the TiAlCrYN coating at 900°C. Y is acting like a ‘plug’ against both inward and outward diffusion of foreign elements. The oxidation behaviour has been further quantified using highly sensitive thermogravimetric analysis and glancing angle X-ray diffraction. The successful impact of the incorporation of Y into TiAlCrN and the use of a Cr containing nanostructured oxynitride sputter deposited overcoat is shown by coated two flute ball nosed solid carbide cutters at a cutting speed of 385 m min-1.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

the Materials Research InstituteSheffield Hallam University, Howard Street, Sheffield S1 1WB, UK

the Department of MaterialsUniversity of Oxford, Parks Road, Oxford OX1 3PH, UK

References (17)

Show source-provided references
1. 10.1116/1.57370910.1116/1.573709 ↗
2. 10.1063/1.34566410.1063/1.345664 ↗
3. 10.1179/sur.1998.14.1.3710.1179/sur.1998.14.1.37 ↗
4. DONOHUE L. A. · Surf. Coat. Technol · 1997 · 226 · 94
5. 10.1016/0257-8972(92)90058-I10.1016/0257-8972(92)90058-I ↗
6. MUNZ W.-D. · Le Vide · 2000 · 297 · 3
7. 10.1116/1.58241410.1116/1.582414 ↗
8. WADSWORTH I. · Surf. Coat. Technol · 1997 · 315 · 94
9. 10.1016/0168-583X(85)90762-110.1016/0168-583X(85)90762-1 ↗
10. 10.1016/S0257-8972(99)00047-X10.1016/S0257-8972(99)00047-X ↗
11. 10.1116/1.57807410.1116/1.578074 ↗
12. 10.1063/1.34884910.1063/1.348849 ↗
13. SCHARF U. · 1998
14. LUO Q. · Wear · 1999 · 74 · 225
15. HOLLECK H. · Surf. Coat. Technol · 1995 · 328 · 76
16. 10.1016/S0257-8972(99)00572-110.1016/S0257-8972(99)00572-1 ↗
17. JCPDS-ICDD Diffraction Data Database, International Centre for Diffraction Data, Newton Square, PA, 1993.