Effect of crystallisation on electrochemical properties of arc sprayed FeNiCrBSiNbW coatings
Source abstract
Abstract
FeNiCrBSiNbW coatings were prepared using a twin wires arc spraying process and were subsequently annealed at 450, 550 and 650°C for 1 h to obtain coatings with different crystallisation. The effect of crystallisation on the electrochemical properties of the coatings was investigated. Transformation of the amorphous phase to crystalline phases of α-(Fe,Cr), Fe3B and Fe23B6 occurred when the as sprayed coating was treated at 650°C. Open circuit potential tests, potentiodynamic polarisation tests and electrochemical impendence spectroscopy were employed to investigate the corrosion resistance of the coatings in 3·5 wt-%NaCl solution. The results showed that the corrosion resistance of the coatings decreased with increasing annealing temperature, and the as sprayed coating exhibited the best corrosion resistance among the four kinds of coatings. This was attributed to the high amorphous phase content and the absence of borides such as Fe3B and Fe23B6 phases in the coating.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metallic Glasses and Amorphous Alloys · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Institute of Metals and Protection College of Mechanics and Materials, Hohai University, 1 Xikang Road, Nanjing 210098, China
Southeast University Nanjing 211189, PR China
References (28)
Show source-provided references
1. 10.1016/j.surfcoat.2004.08.18710.1016/j.surfcoat.2004.08.187 ↗
2. 10.1007/BF0264527910.1007/BF02645279 ↗
3. 10.1016/j.surfcoat.2011.08.04510.1016/j.surfcoat.2011.08.045 ↗
4. 10.1007/s11837-012-0338-910.1007/s11837-012-0338-9 ↗
5. 10.1016/j.corsci.2010.12.02210.1016/j.corsci.2010.12.022 ↗
6. 10.1016/j.actamat.2004.05.02210.1016/j.actamat.2004.05.022 ↗
7. 10.1179/026708410X1250687072439810.1179/026708410X12506870724398 ↗
8. 10.1179/1743294412Y.000000002510.1179/1743294412Y.0000000025 ↗
9. 10.1016/j.actamat.2012.04.00510.1016/j.actamat.2012.04.005 ↗
10. 10.1002/maco.20110642610.1002/maco.201106426 ↗
11. 10.1016/j.matlet.2012.08.11410.1016/j.matlet.2012.08.114 ↗
12. 10.1007/s11666-012-9876-510.1007/s11666-012-9876-5 ↗
13. Guo JH · Aata Metall. Sin. · 2007 · 43 · 780
14. 10.1007/s11666-012-9779-510.1007/s11666-012-9779-5 ↗
15. 10.1007/s11666-013-0017-610.1007/s11666-013-0017-6 ↗
16. Cheng JB · J. Therm. Spray Technol. · 2012 · 22 · 47110.1007/s11666-013-9892-0 ↗
17. 10.1007/s11666-013-9990-z10.1007/s11666-013-9990-z ↗
18. 10.1016/j.surfcoat.2013.12.07110.1016/j.surfcoat.2013.12.071 ↗
19. 10.1016/j.jallcom.2013.07.10910.1016/j.jallcom.2013.07.109 ↗
20. ‘Standard practice for preparing, cleaning, and evaluating corrosion test specimens’, G 1-03, Annual Book of ASTM Standards, ASTM, 2003.
21. ‘Standard practice for conventions applicable to electrochemical measurements in corrosion testing’, G 3-89, Annual Book of ASTM Standards, ASTM, 1989.
22. 10.1016/j.surfcoat.2006.01.04110.1016/j.surfcoat.2006.01.041 ↗
23. 10.1016/S0010-938X(03)00105-710.1016/S0010-938X(03)00105-7 ↗
24. 10.1016/S0257-8972(01)01197-510.1016/S0257-8972(01)01197-5 ↗
25. 10.1007/s11666-009-9305-610.1007/s11666-009-9305-6 ↗
26. 10.1016/j.jallcom.2012.02.12710.1016/j.jallcom.2012.02.127 ↗
27. 10.1016/j.surfcoat.2013.08.02910.1016/j.surfcoat.2013.08.029 ↗
28. 10.1007/s11661-010-0296-110.1007/s11661-010-0296-1 ↗