journal article·2014-12

Protection of Cu components with Mg and Al coatings deposited by pack cementation

D. Stathokostopoulos, D. Chaliampalias, E. Pavlidou, K. Chrissafis, G. Stergioudis, P. Patsalas, G. Vourlias

Surface Engineering· Volume 30· Issue 12
Publisher page

Abstract

The growth of Mg and Al coatings on copper by pack cementation is examined in this work by investigating the mechanism of the process, the effect of temperature and heating time on the coating structure. The experiments were undertaken at temperatures ranging from 550 to 600°C, while the duration of the process varied from 30 min to 3 h. It was found that the magnesium coatings consist of two phases corresponding to MgCu2 and CuMg2. These phases appeared as distinguished layers or mixed with each other, depending on the deposition temperature and duration. On the other hand, the aluminium coatings consist of a single Al4Cu9 phase whose thickness increases with deposition time and temperature. Finally, the oxidation resistance was also evaluated by thermogravimetric measurements, which revealed that the coated samples have superior resistance to bare copper, while Al coated coupons had the best performance when exposed in high temperature environment.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Physics Department Aristotle University of Thessaloniki, Thessaloniki 54124, Greece

References (28)

Show source-provided references
1. 10.1109/TDEI.2009.521184510.1109/TDEI.2009.5211845 ↗
2. 10.1016/j.surfcoat.2008.05.02610.1016/j.surfcoat.2008.05.026 ↗
3. A Schweitzer P: ‘Fundamentals of metallic corrosion: atmospheric and media corrosion of metals’, 2nd edn; 2007, Boca Raton, FL, CRC Press.10.1201/9780849382444 ↗
4. 10.1179/026708410X1278678557327410.1179/026708410X12786785573274 ↗
5. 10.1179/026708408X33906410.1179/026708408X339064 ↗
6. 10.1016/j.corsci.2008.12.00910.1016/j.corsci.2008.12.009 ↗
7. 10.1063/1.35723110.1063/1.357231 ↗
8. Chaliampalias D, Andronis S, Stergioudis G, Tsipas D, Vourlias G and Pavlidou E: ‘Deposition of multilayer NiCrBSiFe and Al coatings on low carbon steels’, Microscopy Cong., Kiel, Germany, August–September 2011, Proc. (Copyright) 2011 DGE – German Society for Electron Microscopy e.V. Germany, MC2011.
9. 10.1016/S0040-6090(98)00878-510.1016/S0040-6090(98)00878-5 ↗
10. 10.1063/1.163035510.1063/1.1630355 ↗
11. 10.1016/j.apsusc.2013.08.07010.1016/j.apsusc.2013.08.070 ↗
12. 10.1063/1.473153210.1063/1.4731532 ↗
13. 10.1007/s10973-011-2183-410.1007/s10973-011-2183-4 ↗
14. 10.1016/j.surfcoat.2009.04.03110.1016/j.surfcoat.2009.04.031 ↗
15. 10.1179/cmq.2009.48.1.9110.1179/cmq.2009.48.1.91 ↗
16. 10.1016/j.actamat.2006.05.03210.1016/j.actamat.2006.05.032 ↗
17. 10.1007/s11085-012-9340-410.1007/s11085-012-9340-4 ↗
18. 10.1007/s10973-006-8237-310.1007/s10973-006-8237-3 ↗
19. 10.4028/www.scientific.net/AMR.848.1110.4028/www.scientific.net/AMR.848.11 ↗
20. 10.1007/s11085-013-9463-210.1007/s11085-013-9463-2 ↗
21. 10.1016/j.surfcoat.2013.09.04010.1016/j.surfcoat.2013.09.040 ↗
22. 10.1016/0257-8972(92)90038-C10.1016/0257-8972(92)90038-C ↗
23. Abd El-Azim ME · J. Mater. Sci. Technol. · 1997 · 13 · 127
24. ‘PC powder diffraction files’, JCPDS-ICDD, 2003.
25. Okamoto H: ‘Alloy phase diagram’, Vol. 3, 747–748; 1992, Materials Park, OH, ASM International.
26. 10.1016/S0010-938X(97)00037-110.1016/S0010-938X(97)00037-1 ↗
27. 10.1002/9780470172551.ch910.1002/9780470172551.ch9 ↗
28. 10.1149/1.242442010.1149/1.2424420 ↗