Wear behaviour of borided α, α+β and β Titanium alloys
Source abstract
Abstract
This study aims to compare the wear properties of borided biomedical-grade titanium alloys, namely Cp-Ti, Ti-6Al-4V and Ti-45Nb, from basic classes each possessing α, α+β and β crystalline structures, respectively. The work also focuses on identifying the wear mechanisms that occur during tribological testing. Wear tests were conducted on surface treated samples under conditions that yielded maximum thickness and hardness values. A pin-on-disk tribometer with reciprocating motion, using a WC-Co ball as the counterface, was employed for dry sliding wear tests. Wear resistance was evaluated through wear track measurements and weight loss methods. Morphological features, microstructure of tested surfaces and also the debris generated were also analysed. At loads up to 12 N, mild polishing wear with shallow scratches and no detectable weight loss was observed across all titanium alloys. The Ti-45Nb alloy exhibited the most severe wear at 17 N due to the thinner boride layer, higher surface roughness, lower hardness and adhesion strength, resulting in premature degradation. Above 17 N, signs of delamination, microcracks, and chipping appeared to some extent in Cp-Ti and Ti-6Al-4V alloys, primarily ascribed to fatigue wear. However, no weight loss was recorded across all tested loads, indicating superior wear resistance.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Metal and Thin Film Mechanics · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Naval Architecture and Marine Engineering, Karadeniz Technical University, Trabzon, Turkey
References (31)
Show source-provided references
1. 10.1177/0954406223116450610.1177/09544062231164506 ↗
2. 10.1007/s10856-006-6330-610.1007/s10856-006-6330-6 ↗
3. 10.3390/ma1716392210.3390/ma17163922 ↗
4. 10.1016/j.optlastec.2023.11015910.1016/j.optlastec.2023.110159 ↗
5. Kara G, et al. Characterization of boride layer formed on Ti–6Al–4V alloy by electron beam evaporation technique. Phys Metals Metall 2021; 55: 1466–1472.
6. 10.1080/00202967.2021.198097110.1080/00202967.2021.1980971 ↗
7. Khater MA, et al. Kinetics simulation of TiB2 layers on the titanium alloy (Ti6Al4V) obtained by liquid boriding process. Metal Mater/Kovov Mater 2024; 62: 245–252.
8. 10.3103/S106837552104009810.3103/S1068375521040098 ↗
9. 10.1016/j.surfcoat.2018.07.08510.1016/j.surfcoat.2018.07.085 ↗
10. 10.1080/02670844.2018.155264610.1080/02670844.2018.1552646 ↗
11. 10.1016/j.surfcoat.2020.12605110.1016/j.surfcoat.2020.126051 ↗
12. 10.1177/1350650124130648310.1177/13506501241306483 ↗
13. Kara G, et al. Microstructure and tribological properties of Ti borided by electron beam evaporation technique. J Balk Tribol Assoc 2015; 21: 24–37.
14. 10.1080/02670844.2020.176376510.1080/02670844.2020.1763765 ↗
15. 10.1108/ILT-11-2015-017410.1108/ILT-11-2015-0174 ↗
16. 10.3390/mi1311190710.3390/mi13111907 ↗
17. 10.1007/s11665-022-06812-610.1007/s11665-022-06812-6 ↗
18. Holmberg K, et al. Coatings tribology: properties, mechanisms, techniques and applications in surface engineering. Amsterdam: Elsevier, 2009.
19. 10.1515/mt-2022-023810.1515/mt-2022-0238 ↗
20. 10.1134/S002016852110006X10.1134/S002016852110006X ↗
21. 10.1179/174328006X10252910.1179/174328006X102529 ↗
22. 10.1016/j.wear.2021.20382510.1016/j.wear.2021.203825 ↗
23. Chodisetti SP, et al. Influence of TiB2 and wear conditions on friction and wear behaviour of SiC ceramics in reciprocating sliding. J Eur Ceramic Soc 2024; 55: 2704–2719.
24. 10.1080/1040200070173937010.1080/10402000701739370 ↗
25. 10.1007/s11249-021-01471-510.1007/s11249-021-01471-5 ↗
26. 10.1179/174328408X37466710.1179/174328408X374667 ↗
27. 10.1016/j.surfcoat.2020.12659810.1016/j.surfcoat.2020.126598 ↗
28. 10.1016/j.matdes.2021.11006810.1016/j.matdes.2021.110068 ↗
29. 10.1007/s11661-023-07163-010.1007/s11661-023-07163-0 ↗
30. 10.1007/s11661-018-4993-510.1007/s11661-018-4993-5 ↗
31. 10.1080/17515831.2022.213951710.1080/17515831.2022.2139517 ↗